# Hey guys, I figured out how to devide by 0 (Rotary content) **URL:** \ **Category:** Shift518 Automotive\ **Created:** [January 29, 2010, 12:04am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014 "2010-01-29T00:04:34Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![MX-5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mx-5/32/6336_2.png) [@MX-5](https://forums.speedlife.net/u/MX-5)\ **Post date:** [January 29, 2010, 12:04am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/1 "2010-01-29T00:04:34Z")
![http://img54.exs.cx/img54/9562/12rotor2.jpg](http://img54.exs.cx/img54/9562/12rotor2.jpg) :ohnoes if this actually worked it would be ridiculously insane ---
**Author:** ![offroadzj](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/offroadzj/32/6428_2.png) [@offroadzj](https://forums.speedlife.net/u/offroadzj)\ **Post date:** [January 29, 2010, 2:42am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/2 "2010-01-29T02:42:01Z")
thats the nice thing about rotaries. If you can get a controller to be able to control everything, it would work no problem. Then you have the issue of trying to actually fit that into anything… lol although depending on what they made the e-shaft out of, I dont forsee it lasting very long unless its well made/reinforced somehow ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [January 29, 2010, 2:57am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/3 "2010-01-29T02:57:22Z")
if they are 13b’s joined thats 7.8L of rotary, 15.6L of displacement in the piston world… INSANE. must be wicked heavy too. ---
**Author:** ![offroadzj](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/offroadzj/32/6428_2.png) [@offroadzj](https://forums.speedlife.net/u/offroadzj)\ **Post date:** [January 29, 2010, 3:34am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/4 "2010-01-29T03:34:58Z")
and 36 combustion chambers… lol the sad part is that its probably only slightly heavier than a large V8. When I had my rx7 with the plain 13b, we pulled the motor out and I carried it down into the basement. That was with the intake manifolds, vac lines, etc still on it. ---
**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\ **Post date:** [January 29, 2010, 4:14am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/5 "2010-01-29T04:14:52Z")
I doubt they made a crank that long, and even if they did the harmonics would rip itself a part no doubt. ---
**Author:** ![1stgen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1stgen/32/6288_2.png) [@1stgen](https://forums.speedlife.net/u/1stgen)\ **Post date:** [January 29, 2010, 6:17am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/6 "2010-01-29T06:17:51Z")
[QUOTE=offroadzj;538259]and 36 combustion chambers… lol QUOTE] Or 0 since it’s a rotary…LOL I really wish mazda would give the fuck up on that piece of shit, outdated, outmoded, unreliable and needs a rebuild everytime you start it…they are basically useless other than revving to plaid and making a whopping 200 h.p. and 2 ft lbs of tourqe. Not to mention you have to be puerto rican to rebuild them. They worked great in WW1…know lets move on…yeah yeah yeah…put a turbo on it and blah blah blah…until it detonates once and cracks a seal ---
**Author:** ![MX-5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mx-5/32/6336_2.png) [@MX-5](https://forums.speedlife.net/u/MX-5)\ **Post date:** [January 29, 2010, 6:29am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/7 "2010-01-29T06:29:31Z")
> [@FS: Gateway Laptop & Belkin Wireless Notebook Card](https://forums.speedlife.net/t/fs-gateway-laptop-belkin-wireless-notebook-card/28791/6): > > Or 0 since it’s a rotary…LOL > I really wish mazda would give the fuck up on that piece of shit, outdated, outmoded, unreliable and needs a rebuild everytime you start it…they are basically useless other than revving to plaid and making a whopping 200 h.p. and 2 ft lbs of tourqe. Not to mention you have to be puerto rican to rebuild them. They worked great in WW1…know lets move on…yeah yeah yeah…put a turbo on it and blah blah blah…until it detonates once and cracks a seal nahhhh, actually Mazda has redesigned the rotary so the life of it is a lot longer than it used to be. Also it does have a combustion chamber. Why the fuck wouldn’t it? Because it’s a rotary combustion doesn’t occur? oh right they work off of magic and not combustion. ---
**Author:** ![1stgen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1stgen/32/6288_2.png) [@1stgen](https://forums.speedlife.net/u/1stgen)\ **Post date:** [January 29, 2010, 6:54am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/8 "2010-01-29T06:54:31Z")
> [@OFFICIAL Buffalo Sabres Thread](https://forums.speedlife.net/t/official-buffalo-sabres-thread/25170/5186): > > nahhhh, actually Mazda has redesigned the rotary so the life of it is a lot longer than it used to be. Also it does have a combustion chamber. Why the fuck wouldn’t it? Because it’s a rotary combustion doesn’t occur? oh right they work off of magic and not combustion. Actually no there not reliable. I personally have replaced 6 rotaries in the 2 years i’ve been working at a joint mazda dealer, all of them had less than 30k on them. Not to mention mazda lied about power output in the first couple of years of the rX-8 so now they are replacing motors like the boat anchors they are. And if you want to get into it the combustion chamber discussion then we can have a fun time. Think of a two stroke motor and it will become clearer. ---
**Author:** ![offroadzj](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/offroadzj/32/6428_2.png) [@offroadzj](https://forums.speedlife.net/u/offroadzj)\ **Post date:** [January 29, 2010, 7:06am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/9 "2010-01-29T07:06:36Z")
what most people dont understand is that a rotary is just as reliable as any other motor when properly cared for. My non-turbo was pushing almost 150k when I did the rebuild and it didnt need a rebuild, I just did it mainly so I could port it. They do require more maintenace, but will last just as long as any other motor out there. I have seen a few rotaries up around 200k and even some 300k. I understand that they dont have “combustion chambers” per say, but they basically are the same concept. The chamber fills with air/fuel, compresses, spark ignites it and it ‘combusts’. I do agree that they could use more torque, but in all they are a very simple motor and reliable if given the proper maintenance. ---
**Author:** ![offroadzj](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/offroadzj/32/6428_2.png) [@offroadzj](https://forums.speedlife.net/u/offroadzj)\ **Post date:** [January 29, 2010, 7:09am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/10 "2010-01-29T07:09:23Z")
If I had the money, i would love to buy another rotary. I loved that car and that motor. A complete rebuild took a little over a weekend… with only working a few hours a day. Once its out of the car, its basically like taking apart a sandwich and making it again… lol. ---
**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\ **Post date:** [January 29, 2010, 7:11am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/11 "2010-01-29T07:11:20Z")
> [@hello](https://forums.speedlife.net/t/hello/28866/6): > > what most people dont understand is that a rotary is just as reliable as any other motor when properly cared for. My non-turbo was pushing almost 150k when I did the rebuild and it didnt need a rebuild, I just did it mainly so I could port it. They do require more maintenace, but will last just as long as any other motor out there. I have seen a few rotaries up around 200k and even some 300k. I understand that they dont have “combustion chambers” per say, but they basically are the same concept. The chamber fills with air/fuel, compresses, spark ignites it and it ‘combusts’. I do agree that they could use more torque, but in all they are a very simple motor and reliable if given the proper maintenance. anything engineered for twice it’s actual power output will last a long time. you have seen a FEW rotaries last 200k+, probably could count them on one hand. you put 100 wankels on stands next to 100 piston engines and let them run and I’d put money on more than double the amount of piston motors running after 100k than rotaries. ---
**Author:** ![1stgen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1stgen/32/6288_2.png) [@1stgen](https://forums.speedlife.net/u/1stgen)\ **Post date:** [January 29, 2010, 7:14am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/12 "2010-01-29T07:14:59Z")
> [@hello](https://forums.speedlife.net/t/hello/28866/6): > > what most people dont understand is that a rotary is just as reliable as any other motor when properly cared for. My non-turbo was pushing almost 150k when I did the rebuild and it didnt need a rebuild, I just did it mainly so I could port it. They do require more maintenace, but will last just as long as any other motor out there. I have seen a few rotaries up around 200k and even some 300k. I understand that they dont have “combustion chambers” per say, but they basically are the same concept. The chamber fills with air/fuel, compresses, spark ignites it and it ‘combusts’. I do agree that they could use more torque, but in all they are a very simple motor and reliable if given the proper maintenance. Like i said…tell that to the customers in here bitching about there rx-8’s. I’m sure there are a bunch of old 13B and 12A’s that lasted a while. But they didnt have all the emmisions equipment the new ones have. Which destroys your oil and fills your engine with leftover combustion gasses and water. The old cars also had the benefit of ALOT of fuel being dumped in the motor. Which has the benefit of running cooler temperatures. I guarantee you will not see an rx-8 go 200k. ---
**Author:** ![offroadzj](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/offroadzj/32/6428_2.png) [@offroadzj](https://forums.speedlife.net/u/offroadzj)\ **Post date:** [January 29, 2010, 7:15am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/13 "2010-01-29T07:15:29Z")
with properly maintaining both motors??? There are less moving parts in a rotary (3 to be exact) which means that there are a hell of a lot less parts that can break. In vehicles I have personally seen (not just heard of). I can honestly say I know almost as many rotaries over 200k as I do piston engines over 200k. Im not quite sure what you are getting at with the first comment… and what you also have to take into account is that there are a lot more piston engines in existance than rotaries. So you cannot even compare straight number of piston engines vs rotary engines. As a ratio, I bet they are pretty close (taking only into account people who properly maintain their vehicles for both sides) ---
**Author:** ![offroadzj](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/offroadzj/32/6428_2.png) [@offroadzj](https://forums.speedlife.net/u/offroadzj)\ **Post date:** [January 29, 2010, 7:16am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/14 "2010-01-29T07:16:43Z")
> [@OFFICIAL Buffalo Sabres Thread](https://forums.speedlife.net/t/official-buffalo-sabres-thread/25170/5201): > > Like i said…tell that to the customers in here bitching about there rx-8’s. I’m sure there are a bunch of old 13B and 12A’s that lasted a while. But they didnt have all the emmisions equipment the new ones have. Which destroys your oil and fills your engine with leftover combustion gasses and water. The old cars also had the benefit of ALOT of fuel being dumped in the motor. Which has the benefit of running cooler temperatures. I guarantee you will not see an rx-8 go 200k. I dont know a whole lot about the new renesis rotaries. I am basing my statements off of the 12a, 13b motors in the multiple generations of rx7’s. ---
**Author:** ![1stgen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1stgen/32/6288_2.png) [@1stgen](https://forums.speedlife.net/u/1stgen)\ **Post date:** [January 29, 2010, 7:16am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/15 "2010-01-29T07:16:43Z")
> [@OFFICIAL Buffalo Sabres Thread](https://forums.speedlife.net/t/official-buffalo-sabres-thread/25170/5198): > > anything engineered for twice it’s actual power output will last a long time. > > you have seen a FEW rotaries last 200k+, probably could count them on one hand. > > you put 100 wankels on stands next to 100 piston engines and let them run and I’d put money on more than double the amount of piston motors running after 100k than rotaries. Thats the truth actually, I will put my 1.8T up against a rotary anyday on the stand. ---
**Author:** ![1stgen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1stgen/32/6288_2.png) [@1stgen](https://forums.speedlife.net/u/1stgen)\ **Post date:** [January 29, 2010, 7:18am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/16 "2010-01-29T07:18:54Z")
> [@OFFICIAL Buffalo Sabres Thread](https://forums.speedlife.net/t/official-buffalo-sabres-thread/25170/5202): > > I dont know a whole lot about the new renesis rotaries. I am basing my statements off of the 12a, 13b motors in the multiple generations of rx7’s. The renesis is junk…mazda knows it and the customers know it. Just because there are less rotating parts doesn’t mean they can produce 300 wheel and 300 ft/lbs reliably. They don’t my VW will…just sayin. ---
**Author:** ![offroadzj](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/offroadzj/32/6428_2.png) [@offroadzj](https://forums.speedlife.net/u/offroadzj)\ **Post date:** [January 29, 2010, 7:20am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/17 "2010-01-29T07:20:36Z")
I cannot argue with you on the renesis… i dont know much at all about it. From what I have heard, they arent what they were made out to be so I would probably agree with you on them. But I stand my ground on the 12a/13b’s ---
**Author:** ![1stgen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1stgen/32/6288_2.png) [@1stgen](https://forums.speedlife.net/u/1stgen)\ **Post date:** [January 29, 2010, 7:27am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/18 "2010-01-29T07:27:58Z")
> [@hello](https://forums.speedlife.net/t/hello/28866/8): > > I cannot argue with you on the renesis… i dont know much at all about it. From what I have heard, they arent what they were made out to be so I would probably agree with you on them. But I stand my ground on the 12a/13b’s Totally not arguing the fact that the 13B and 12A can be a reliable motor…but not when you overheat, or detonate or make more than the 120 h.p they came with. Piston motors are where it’s at, even if there outdated at this point. The rotary is great for midgets, bugeye sprites, old elans etc etc very versatile to put into smaller cars. Just dont think they should continue using them in huge overweight sportscars. ---
**Author:** ![MX-5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mx-5/32/6336_2.png) [@MX-5](https://forums.speedlife.net/u/MX-5)\ **Post date:** [January 29, 2010, 7:29am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/19 "2010-01-29T07:29:41Z")
13b miata? :ninja ---
**Author:** ![1stgen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1stgen/32/6288_2.png) [@1stgen](https://forums.speedlife.net/u/1stgen)\ **Post date:** [January 29, 2010, 7:37am UTC](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014/20 "2010-01-29T07:37:24Z")
> [@D1GP Pics (no 56K)](https://forums.speedlife.net/t/d1gp-pics-no-56k/28867/2): > > 13b miata? :ninja Wow…not cool. LOL [Next page](https://forums.speedlife.net/t/hey-guys-i-figured-out-how-to-devide-by-0-rotary-content/250014.md?page=2)