# HICAS hardlines

**URL:** <https://forums.speedlife.net/t/hicas-hardlines/107244>\
**Category:** SON240sx Automotive\
**Created:** [June 28, 2007, 8:26pm UTC](https://forums.speedlife.net/t/hicas-hardlines/107244 "2007-06-28T20:26:55Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![shift2.0](https://avatars.discourse-cdn.com/v4/letter/s/bbce88/32.png) [@shift2.0](https://forums.speedlife.net/u/shift2.0)\
**Post date:** [June 28, 2007, 8:26pm UTC](https://forums.speedlife.net/t/hicas-hardlines/107244/1 "2007-06-28T20:26:55Z")

</div>

Where can I buy the feed/return hardlines for HICAS that bring fluid to/from the rear rack? I’m talking about the two hardlines that run along the underbody on the passenger side?

Its leaking right about in the middle…where there is bushing/snap-on bracket that hold the lines in place…I believe it has been rotten away…anyone can suggest other options?

---

<div class="post-metadata">

**Author:** ![Fobwall](https://avatars.discourse-cdn.com/v4/letter/f/7ea924/32.png) [@Fobwall](https://forums.speedlife.net/u/Fobwall)\
**Post date:** [June 28, 2007, 8:30pm UTC](https://forums.speedlife.net/t/hicas-hardlines/107244/2 "2007-06-28T20:30:41Z")

</div>

Send a pm to Hurricane on the board, I believe he is selling exactly what you are asking for.

---

<div class="post-metadata">

**Author:** ![sidewayz240](https://avatars.discourse-cdn.com/v4/letter/s/e99b99/32.png) [@sidewayz240](https://forums.speedlife.net/u/sidewayz240)\
**Post date:** [June 28, 2007, 9:32pm UTC](https://forums.speedlife.net/t/hicas-hardlines/107244/3 "2007-06-28T21:32:46Z")

</div>

a section of my hicas line was rusty and a tiny pin hole was created, the fluid was just pissing out. I cut out the rusty section and got rubber hose (I believe it was power steering hose… possibly) and a couple clamps and clamped it in between where I cut. Been driving around with it like that for over a month and no promlems.

---

<div class="post-metadata">

**Author:** ![shift2.0](https://avatars.discourse-cdn.com/v4/letter/s/bbce88/32.png) [@shift2.0](https://forums.speedlife.net/u/shift2.0)\
**Post date:** [June 29, 2007, 5:52am UTC](https://forums.speedlife.net/t/hicas-hardlines/107244/4 "2007-06-29T05:52:07Z")

</div>

> [@sidewayz240"](#):
>
> a section of my hicas line was rusty and a tiny pin hole was created, the fluid was just pissing out. I cut out the rusty section and got rubber hose (I believe it was power steering hose… possibly) and a couple clamps and clamped it in between where I cut. Been driving around with it like that for over a month and no promlems.

I thought about that…but that means you had to arc the pipe down a bit, or somehow allow some play in order to compensate for the added thickness of the hose, right? Thats doable?