# hicas light is on...

**URL:** <https://forums.speedlife.net/t/hicas-light-is-on/80061>\
**Category:** SON240sx Automotive\
**Created:** [September 11, 2003, 11:15pm UTC](https://forums.speedlife.net/t/hicas-light-is-on/80061 "2003-09-11T23:15:32Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![koz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/koz/32/5478_2.png) [@koz](https://forums.speedlife.net/u/koz)\
**Post date:** [September 11, 2003, 11:15pm UTC](https://forums.speedlife.net/t/hicas-light-is-on/80061/1 "2003-09-11T23:15:32Z")

</div>

lately, my hicas light comes on about 10 minutes after startup and stays  
on until the car is turned off. i don’t feel any difference in the steering  
or handling, and all fluids are topped up (no leaks). :?

how do i go about testing the hicas to determine if there is anything wrong with it?

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [September 12, 2003, 5:27am UTC](https://forums.speedlife.net/t/hicas-light-is-on/80061/2 "2003-09-12T05:27:32Z")

</div>

HICAS Diagnostic Procedure

1. Input starting conditions for self-diagnosis.

- Turn ignition switch “OFF”.
- Set shift lever to “P” or “N” (A/T) or “Neutral” (M/T).
- Turn ignition switch “ON”.
- Immediately start engine.
- Turn steering wheel from left to right (at least 20deg from the neutral position) 5- times or more, then depress foot brake pedal at least 5- times all within 10- seconds after ignition switch has been turned “ON”.

1. Input self-diagnosis item.

- Depress and release foot brake pedal.

- Turn steering wheel from left to right (at least 20deg) from the neutral position.

- (M/T model):  
Depress clutch pedal and move gear shift lever to any position other than Neutral and return to Neutral. Release clutch pedal.

(A/T model):  
Disengage and engage parking brake lever. Move shift lever to any position other than Neutral or Parking and return to Parking.

- Move car at least 3 meters (10ft) forward and proceed at indicated speed of at least 2km/h (1mph) in self-diagnosis mode.

1. The self-diagnosis mode will then appear in the “HICAS” warning lamp.

- When all systems are normal HICAS warning lamp flashes at 0.25 second intervals.
- When there is a system malfunction (there is a nifty diagram here of HICAS lamp pulses. I tried to translate them to words…)

Mode A)  
10 short pulses for 5 seconds.  
No pulses for 5 seconds.  
Nine 2-second interval indicating the system status (18 seconds total).  
(short pulse = good, 1 second pulse=bad)

1. HICAS Solenoid R.H.
2. HICAS Solenoid L.H.
3. Fail-Safe Valve
4. (Constantly normal mode)
5. Vehicle Speed Sensor
6. Steering Angle Sensor
7. Steering Neutral Position Sensor
8. A/T: Parking brake sensor  
M/T: Clutch Sensor
9. A/T: Inhibitor Sensor  
M/T: Neutral Sensor

\*\* Display repeats until ignition switch is turned “OFF” or 5 min has past.

Mode B)  
Lamp on for 5 seconds.  
No pulses for 5 seconds.  
Nine 2-second interval indicating the system status (18 seconds total).  
(short (0.1 sec) pulse = good, 1 second pulse=bad)

1. HICAS Solenoid R.H.
2. HICAS Solenoid L.H.
3. Fail-Safe Valve
4. (Constantly normal mode)
5. Vehicle Speed Sensor
6. Steering Angle Sensor
7. Steering Neutral Position Sensor
8. A/T: Parking brake sensor  
M/T: Clutch Sensor
9. A/T: Inhibitor Sensor  
M/T: Neutral Sensor

\*\* Display repeats until ignition switch is turned “OFF” or 5 min has past.

Note 1: To change the display mode to “A”, turn OFF ignition switch after mode “B” is displayed. When battery is insufficient, mode “B” is displayed.

Note 2: If fail-safe system was operated (fail-safe valve is operating) when ignition switch was turned OFF for the last time, mode A will be displayed. If fail-safe system was not operated when the ignition switch was turned OFF for the last time, mode B will be displayed.

- Canceling the self-diagnosis function

Three methods.

1. By turning the ignition switch off.
2. After self-diagnosis has been operated for ~5 minutes.
3. If the vehicle speed goes over 30 km/h (19 mph).
