# HKS Adjustable Wastegate Actuator

**URL:** <https://forums.speedlife.net/t/hks-adjustable-wastegate-actuator/142211>\
**Category:** Canada Nissan Automotive\
**Created:** [April 13, 2006, 9:03pm UTC](https://forums.speedlife.net/t/hks-adjustable-wastegate-actuator/142211 "2006-04-13T21:03:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dynamo7](https://avatars.discourse-cdn.com/v4/letter/d/5fc32e/32.png) [@Dynamo7](https://forums.speedlife.net/u/Dynamo7)\
**Post date:** [April 13, 2006, 9:03pm UTC](https://forums.speedlife.net/t/hks-adjustable-wastegate-actuator/142211/1 "2006-04-13T21:03:34Z")

</div>

Got this with my new replacement turbo, and i dont know how to adjust it properly. Anyone used one b4? I want to set it to the lowest pressure possible(9psi I think). I dont want to outstep my factory fuel system.

---

<div class="post-metadata">

**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\
**Post date:** [April 13, 2006, 11:10pm UTC](https://forums.speedlife.net/t/hks-adjustable-wastegate-actuator/142211/2 "2006-04-13T23:10:09Z")

</div>

Screw it down to that it is level with your flap gate on the exhaust (that it hooks onto). And then go a turn or two paste that so that you have to pull on the wastegate rod to pull it onto the flap. Should be tight. At leasts that’s how i did mine.