# HKS Racing BOV **URL:** \ **Category:** Classifieds\ **Created:** [September 17, 2008, 7:38am UTC](https://forums.speedlife.net/t/hks-racing-bov/199654 "2008-09-17T07:38:11Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![SP71Supra](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sp71supra/32/5955_2.png) [@SP71Supra](https://forums.speedlife.net/u/SP71Supra)\ **Post date:** [September 17, 2008, 7:38am UTC](https://forums.speedlife.net/t/hks-racing-bov/199654/1 "2008-09-17T07:38:11Z")
I have a used HKS BOV with some damage and a brand new alu flange. Its not in the best shape cosmetically its a little scraped up and it has one issue other than that it works fine. The nipple got damaged and broke off. HKS does not offer it as a part. So the back of it will need to be tapped and just screw in a barbed nipple from lowes or napa, etc… and its fixed. Here are some pictures. Its took apart because I was ready to tap it, then decided I wasn’t going to put 2 BOV’s on my car. Its simple to put back together. ![http://i56.photobucket.com/albums/g169/sp71supra/Supra/100_1676.jpg](http://i56.photobucket.com/albums/g169/sp71supra/Supra/100_1676.jpg) ![http://i56.photobucket.com/albums/g169/sp71supra/Supra/100_1677.jpg](http://i56.photobucket.com/albums/g169/sp71supra/Supra/100_1677.jpg) ![http://i56.photobucket.com/albums/g169/sp71supra/Supra/100_1678.jpg](http://i56.photobucket.com/albums/g169/sp71supra/Supra/100_1678.jpg) ![http://i56.photobucket.com/albums/g169/sp71supra/Supra/100_1679.jpg](http://i56.photobucket.com/albums/g169/sp71supra/Supra/100_1679.jpg) ![http://i56.photobucket.com/albums/g169/sp71supra/Supra/100_1680.jpg](http://i56.photobucket.com/albums/g169/sp71supra/Supra/100_1680.jpg) This BOV is around 400 new without the flange. This one is a lil scuffed and needs tapped and a .30 nipple. This bov can handle over 40psi. $175, PM me if interested, part is located in Monongahela, PA