# Holty's Silverado SS rebuild **URL:** \ **Category:** Builds\ **Created:** [April 24, 2007, 7:42am UTC](https://forums.speedlife.net/t/holtys-silverado-ss-rebuild/189491 "2007-04-24T07:42:03Z")\ **Posts on this page:** 1\ **Showing post:** 30
**Author:** ![SixSpeed454SS](https://avatars.discourse-cdn.com/v4/letter/s/e19adc/32.png) [@SixSpeed454SS](https://forums.speedlife.net/u/SixSpeed454SS)\ **Post date:** [April 25, 2007, 3:35pm UTC](https://forums.speedlife.net/t/holtys-silverado-ss-rebuild/189491/30 "2007-04-25T15:35:19Z")
> [@Rookies tonight???](https://forums.speedlife.net/t/rookies-tonight/29669/30): > > Good luck. Can’t wait to see it this time around. > [@Big Hands vs Choda](https://forums.speedlife.net/t/big-hands-vs-choda/29730/5): > > u should paint the frame,trust me! > [@anyone with a sports bike that rides...](https://forums.speedlife.net/t/anyone-with-a-sports-bike-that-rides/29728/16): > > What about powdercoating the frame? > [@anyone with a sports bike that rides...](https://forums.speedlife.net/t/anyone-with-a-sports-bike-that-rides/29728/17): > > no local shops have a oven big enough and it would be too much $$$ anyways You can clean the wax/grease off of it, then have it sandblasted/powdercoated. There is a shop outside Altoona who does frame powdercoating (they are south of Altoona, in the middle of nowhere - a little bit of a drive, but decent guys). They did Volker’s '64 Cadillac frame for $500 (he brought it to them sandblasted & bare, but all suspension components, rear axle, etc were included). They did a nice job & the finish is very durable. I assembled all the frame components, and was very happy with their work. I know how to get there, but I do not know the shop’s name. I don’t talk to Volker anymore, but I will try to get the name from someone else. I will email this guy now & see if I get the info. Otherwise, you can call Volker & ask him. --- _[View the full topic](https://forums.speedlife.net/t/holtys-silverado-ss-rebuild/189491)._