# Holy spark plugs Batman! **URL:** \ **Category:** Canada Nissan Off Topic\ **Created:** [January 23, 2006, 1:59pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208 "2006-01-23T13:59:49Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Firsttimeboostin](https://avatars.discourse-cdn.com/v4/letter/f/46a35a/32.png) [@Firsttimeboostin](https://forums.speedlife.net/u/Firsttimeboostin)\ **Post date:** [January 23, 2006, 1:59pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/1 "2006-01-23T13:59:49Z")
So its come to that time for me to change out the old and in with the new. So i start hunting around for plugs and relized its pretty fuckin hard to find the right plugs for a car not sold over here!I sourced out part #'s from [zilvia.net](http://zilvia.net) but they were only half of a part # so really it was just a shot in the dark. I ended up getting the NGK BCPR6EY-11 close enough to the BCPR6 listed on zilvia. Thought i needed to share that info to you all :partyman: ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [January 23, 2006, 2:51pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/2 "2006-01-23T14:51:38Z")
what kind of boost are you running? 6 seems mild. ---
**Author:** ![qualthar](https://avatars.discourse-cdn.com/v4/letter/q/74df32/32.png) [@qualthar](https://forums.speedlife.net/u/qualthar)\ **Post date:** [January 23, 2006, 3:01pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/3 "2006-01-23T15:01:47Z")
Call Bumper to Bumper on 99 st and 39 ave. They were able to get my GTR plugs overnight! ---
**Author:** ![Firsttimeboostin](https://avatars.discourse-cdn.com/v4/letter/f/46a35a/32.png) [@Firsttimeboostin](https://forums.speedlife.net/u/Firsttimeboostin)\ **Post date:** [January 23, 2006, 3:10pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/4 "2006-01-23T15:10:57Z")
Stock boost for my CA18DET= 7psi ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [January 23, 2006, 3:25pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/5 "2006-01-23T15:25:02Z")
same plugs. i hope you gapped them because that is pre-set at .045 or 1.1mm as the 11 says at the end. ---
**Author:** ![imported\_silvia](https://avatars.discourse-cdn.com/v4/letter/i/e79b87/32.png) [@imported\_silvia](https://forums.speedlife.net/u/imported_silvia)\ **Post date:** [January 23, 2006, 3:44pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/6 "2006-01-23T15:44:21Z")
What should a guy be running in a SR20DET pushing 13PSI of boost? approx 250hp? And what kind of gap do you guys recomend? Right now it has HKS plugs in her but right now it’s at stock boost and I will be running around a 6PSI low boost and 13PSI high boost, come summer time. What do you guys think I should go with? ---
**Author:** ![Dynamo7](https://avatars.discourse-cdn.com/v4/letter/d/5fc32e/32.png) [@Dynamo7](https://forums.speedlife.net/u/Dynamo7)\ **Post date:** [January 23, 2006, 4:09pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/7 "2006-01-23T16:09:38Z")
This sites got alot of part #'s [http://www.ca18det.org](http://www.ca18det.org) Might help u out for other things ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [January 23, 2006, 4:44pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/8 "2006-01-23T16:44:57Z")
SR’s love BKR7ES11’s on high boost. that is what i run with no problems at all. And the best part they cost 1.50/ plug. ( i bought 16 cuz they were on sale) at stock boost you can use BKR6E-11 or bkr6es-11’s they are more common. ---
**Author:** ![Firsttimeboostin](https://avatars.discourse-cdn.com/v4/letter/f/46a35a/32.png) [@Firsttimeboostin](https://forums.speedlife.net/u/Firsttimeboostin)\ **Post date:** [January 23, 2006, 5:32pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/9 "2006-01-23T17:32:13Z")
> [@RS13](#): > > same plugs. > > i hope you gapped them because that is pre-set at .045 or 1.1mm as the 11 says at the end. I thought you were suppose to gap them at 1.1mm because that is what the info on zilvia said. ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [January 23, 2006, 6:01pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/10 "2006-01-23T18:01:25Z")
> [@Firsttimeboostin](#): > > [quote=RS13]same plugs. > > i hope you gapped them because that is pre-set at .045 or 1.1mm as the 11 says at the end. I thought you were suppose to gap them at 1.1mm because that is what the info on zilvia said.[/quote] ??? maybe on a non-turbo engine. Mine are gapped at .028. .030 or .035 is ok with stock boost but at higher boost the plugs need to be gapped smaller as the upped boost will blow out the spark. But if it is working i would not worry. if you feel a mis fire at higher rpm or a hesitation gap them smaller ---
**Author:** ![Firsttimeboostin](https://avatars.discourse-cdn.com/v4/letter/f/46a35a/32.png) [@Firsttimeboostin](https://forums.speedlife.net/u/Firsttimeboostin)\ **Post date:** [January 23, 2006, 7:39pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/11 "2006-01-23T19:39:06Z")
> [@RS13](#): > > [quote=Firsttimeboostin][quote=RS13]same plugs. > > i hope you gapped them because that is pre-set at .045 or 1.1mm as the 11 says at the end. I thought you were suppose to gap them at 1.1mm because that is what the info on zilvia said.[/quote] ??? maybe on a non-turbo engine. Mine are gapped at .028. .030 or .035 is ok with stock boost but at higher boost the plugs need to be gapped smaller as the upped boost will blow out the spark. But if it is working i would not worry. if you feel a mis fire at higher rpm or a hesitation gap them smaller[/quote] Thats the first time i ever heard of that but, what the hell ill give .30 a try and see how they run. ---
**Author:** ![phat240](https://avatars.discourse-cdn.com/v4/letter/p/ce7236/32.png) [@phat240](https://forums.speedlife.net/u/phat240)\ **Post date:** [January 23, 2006, 8:55pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/12 "2006-01-23T20:55:51Z")
how bout for 18 pounds on a sr? ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [January 23, 2006, 9:19pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/13 "2006-01-23T21:19:13Z")
same as what i run. maybe a gap of .025 but i dunno. you have to keep testing. ---
**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\ **Post date:** [January 23, 2006, 10:32pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/14 "2006-01-23T22:32:27Z")
> [@phat240](#): > > how bout for 18 pounds on a sr? Not listening to Rob usually works good. :lol: :lol: ---
**Author:** ![phat240](https://avatars.discourse-cdn.com/v4/letter/p/ce7236/32.png) [@phat240](https://forums.speedlife.net/u/phat240)\ **Post date:** [January 23, 2006, 11:30pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/15 "2006-01-23T23:30:51Z")
yea rob thanks for the help on the mani ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [January 24, 2006, 6:30am UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/16 "2006-01-24T06:30:40Z")
We whould have done it if you owned some wreches. ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [January 24, 2006, 11:05am UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/17 "2006-01-24T11:05:57Z")
> [@RS13](#): > > SR’s love BKR7ES11’s on high boost. that is what i run with no problems at all. And the best part they cost 1.50/ plug. ( i bought 16 cuz they were on sale) > > at stock boost you can use BKR6E-11 or bkr6es-11’s they are more common. Where did you find the 7 heat range? I was looking everywhere!! PM me. I definitely need some 7’s. ---
**Author:** ![imported\_silvia](https://avatars.discourse-cdn.com/v4/letter/i/e79b87/32.png) [@imported\_silvia](https://forums.speedlife.net/u/imported_silvia)\ **Post date:** [January 24, 2006, 11:15am UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/18 "2006-01-24T11:15:14Z")
NO!! don’t PM, post it up so I can see too! Any opinions on the use of platinum or iridium plugs in the SR? I have heard of some engines burning these out way to fast or fouling them very quickly…any experience with them when you crank up the boost? ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [January 24, 2006, 1:01pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/19 "2006-01-24T13:01:22Z")
Call me anytime. I have 16 at my house right now. Just ask for BKR7ES-11 or BKR7E-11. Just remember to gap them. BPR’s are for rb’s and CA’s ---
**Author:** ![Firsttimeboostin](https://avatars.discourse-cdn.com/v4/letter/f/46a35a/32.png) [@Firsttimeboostin](https://forums.speedlife.net/u/Firsttimeboostin)\ **Post date:** [January 24, 2006, 1:20pm UTC](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208/20 "2006-01-24T13:20:18Z")
> [@RS13](#): > > Call me anytime. I have 16 at my house right now. > Just ask for bpr7es-11 or bpr7e-11 Those are the plugs i pulled fom my CA… whats the deal with this whole heat range thing, thats what i dont understand :oops: I just wanna make sure im not fucking anything up here [Next page](https://forums.speedlife.net/t/holy-spark-plugs-batman/141208.md?page=2)