# HONDA b series turbo oil feed line length???

**URL:** <https://forums.speedlife.net/t/honda-b-series-turbo-oil-feed-line-length/188773>\
**Category:** PittSpeed Automotive\
**Created:** [March 22, 2007, 7:40pm UTC](https://forums.speedlife.net/t/honda-b-series-turbo-oil-feed-line-length/188773 "2007-03-22T19:40:30Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![discoSol](https://avatars.discourse-cdn.com/v4/letter/d/50afbb/32.png) [@discoSol](https://forums.speedlife.net/u/discoSol)\
**Post date:** [March 22, 2007, 7:40pm UTC](https://forums.speedlife.net/t/honda-b-series-turbo-oil-feed-line-length/188773/1 "2007-03-22T19:40:30Z")

</div>

I have searched and searched… how damn long do you need a turbo oil feed line to be for a honda engine bay. im runnin a b series engine with a cast bottom mount manifold… i cant seem to find anything… to be more specific, i have a Garrett gt2860rs with Blox manifold, and im running the blox sandwich plate for the oil feed.  
HELP!!!

---

<div class="post-metadata">

**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\
**Post date:** [March 22, 2007, 8:22pm UTC](https://forums.speedlife.net/t/honda-b-series-turbo-oil-feed-line-length/188773/2 "2007-03-22T20:22:52Z")

</div>

I had the golden eagle sandwhich plate and used about 3 ft of steel braided line and steal had some to work with its just all in how you run it

---

<div class="post-metadata">

**Author:** ![discoSol](https://avatars.discourse-cdn.com/v4/letter/d/50afbb/32.png) [@discoSol](https://forums.speedlife.net/u/discoSol)\
**Post date:** [March 22, 2007, 8:28pm UTC](https://forums.speedlife.net/t/honda-b-series-turbo-oil-feed-line-length/188773/3 "2007-03-22T20:28:57Z")

</div>

Thanks, do you think a 30" line will make it? im going to run it beside the engine over the top of the tranny and back around to the blox sandwich plate.  
i just found a liquidation sale on earls turbo oil lines it’s a 30" -4an line for cheep. Is yours -3an or -4an? and are you runnin an oil restrictor inline?

---

<div class="post-metadata">

**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\
**Post date:** [March 22, 2007, 9:01pm UTC](https://forums.speedlife.net/t/honda-b-series-turbo-oil-feed-line-length/188773/4 "2007-03-22T21:01:58Z")

</div>

mine was -4 and i ran a restrictor, it depends on how low your turbo sits really, keep in mind fittings can lengthen your line a little or restrict it possibly, running around the motor takes a little longer line, than over the valve cover but looks alot better, just get a hold of hybrid for the line the prices are good for it as well