# honda civic build thread in Wv **URL:** \ **Category:** Builds\ **Created:** [March 1, 2009, 6:36pm UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062 "2009-03-01T18:36:11Z")\ **Posts on this page:** 20\ **Page:** 10
**Author:** ![dyingwish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dyingwish/32/6041_2.png) [@dyingwish](https://forums.speedlife.net/u/dyingwish)\ **Post date:** [October 27, 2009, 4:18am UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/181 "2009-10-27T04:18:56Z")
You don’t need to covert that PCV plug into a drain back. The two fittings you purchased do that already. I run that setup… The lines that run to the block will vent to the catch can ONLY under crankcase positive pressure. When the crankcase pressure returns to zero the lines reverse and drain back into the oil galleys. Just make sure, since you’re building a can, is to make the ports connecting to those lines as low as possible so they drain freely. ---
**Author:** ![rev29500](https://avatars.discourse-cdn.com/v4/letter/r/8797f3/32.png) [@rev29500](https://forums.speedlife.net/u/rev29500)\ **Post date:** [October 27, 2009, 4:43am UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/182 "2009-10-27T04:43:14Z")
> [@Rogueeg6"](#): > > hard lined? you mean AN line, thats what they are going to be, -16an lines Yep, yep. ---
**Author:** ![Rogueeg6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rogueeg6/32/6060_2.png) [@Rogueeg6](https://forums.speedlife.net/u/Rogueeg6)\ **Post date:** [October 27, 2009, 5:58pm UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/183 "2009-10-27T17:58:06Z")
. ---
**Author:** ![Rogueeg6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rogueeg6/32/6060_2.png) [@Rogueeg6](https://forums.speedlife.net/u/Rogueeg6)\ **Post date:** [October 28, 2009, 8:28pm UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/184 "2009-10-28T20:28:32Z")
. ---
**Author:** ![dyingwish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dyingwish/32/6041_2.png) [@dyingwish](https://forums.speedlife.net/u/dyingwish)\ **Post date:** [October 29, 2009, 3:57am UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/185 "2009-10-29T03:57:05Z")
> [@dyingwish"](#): > > You don’t need to covert that PCV plug into a drain back. The two fittings you purchased do that already. I run that setup… > > The lines that run to the block will vent to the catch can ONLY under crankcase positive pressure. When the crankcase pressure returns to zero the lines reverse and drain back into the oil galleys. Just make sure, since you’re building a can, is to make the ports connecting to those lines as low as possible so they drain freely. :wtcslap: ---
**Author:** ![Rogueeg6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rogueeg6/32/6060_2.png) [@Rogueeg6](https://forums.speedlife.net/u/Rogueeg6)\ **Post date:** [October 29, 2009, 5:05am UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/186 "2009-10-29T05:05:34Z")
. ---
**Author:** ![dyingwish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dyingwish/32/6041_2.png) [@dyingwish](https://forums.speedlife.net/u/dyingwish)\ **Post date:** [October 29, 2009, 5:12am UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/187 "2009-10-29T05:12:34Z")
> [@craigslist of the day](https://forums.speedlife.net/t/craigslist-of-the-day/41452/10): > > i get your point, but i dont see how having a 3rd line coming from the block could hurt it or anything. ? It’s not going to hurt, but it isn’t going to help either. If you are blowing enough oil out to necessitate three drain backs, your motor is garbage. All three lines will be vents under pressure anyway, so why add yet another line and fittings, when you spent all that time shaving everything that isn’t required? ---
**Author:** ![Rogueeg6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rogueeg6/32/6060_2.png) [@Rogueeg6](https://forums.speedlife.net/u/Rogueeg6)\ **Post date:** [October 29, 2009, 2:24pm UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/188 "2009-10-29T14:24:58Z")
. ---
**Author:** ![Rogueeg6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rogueeg6/32/6060_2.png) [@Rogueeg6](https://forums.speedlife.net/u/Rogueeg6)\ **Post date:** [October 30, 2009, 11:32pm UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/189 "2009-10-30T23:32:47Z")
. ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [October 31, 2009, 5:18am UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/190 "2009-10-31T05:18:51Z")
PPL :crying: about it is gayer ---
**Author:** ![Rogueeg6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rogueeg6/32/6060_2.png) [@Rogueeg6](https://forums.speedlife.net/u/Rogueeg6)\ **Post date:** [November 1, 2009, 7:32pm UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/191 "2009-11-01T19:32:50Z")
. ---
**Author:** ![turbob16](https://avatars.discourse-cdn.com/v4/letter/t/da6949/32.png) [@turbob16](https://forums.speedlife.net/u/turbob16)\ **Post date:** [November 1, 2009, 9:06pm UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/192 "2009-11-01T21:06:41Z")
I hear full race traction bars are awesome , I bought avid racing ones haven’t tested them yet ---
**Author:** ![Rogueeg6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rogueeg6/32/6060_2.png) [@Rogueeg6](https://forums.speedlife.net/u/Rogueeg6)\ **Post date:** [November 4, 2009, 3:59pm UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/193 "2009-11-04T15:59:33Z")
. ---
**Author:** ![Rogueeg6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rogueeg6/32/6060_2.png) [@Rogueeg6](https://forums.speedlife.net/u/Rogueeg6)\ **Post date:** [November 6, 2009, 10:04pm UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/194 "2009-11-06T22:04:00Z")
. ---
**Author:** ![JackdUp](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jackdup/32/6015_2.png) [@JackdUp](https://forums.speedlife.net/u/JackdUp)\ **Post date:** [November 6, 2009, 10:09pm UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/195 "2009-11-06T22:09:55Z")
This is one of the nicest engine bay cleanup I’ve seen on a local hatch. Great work! ---
**Author:** ![foz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/foz/32/6028_2.png) [@foz](https://forums.speedlife.net/u/foz)\ **Post date:** [November 6, 2009, 11:42pm UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/196 "2009-11-06T23:42:03Z")
> [@thinking bout new wheels for the titan](https://forums.speedlife.net/t/thinking-bout-new-wheels-for-the-titan/41489/11): > > This is one of the nicest engine bay cleanup I’ve seen on a local hatch. Great work! and it’s cool to watch the play by play updates… Gets motivating Keep it up! ---
**Author:** ![ZXGTO06](https://avatars.discourse-cdn.com/v4/letter/z/e47c2d/32.png) [@ZXGTO06](https://forums.speedlife.net/u/ZXGTO06)\ **Post date:** [November 7, 2009, 12:03am UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/197 "2009-11-07T00:03:48Z")
Very nice ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [November 7, 2009, 5:23am UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/198 "2009-11-07T05:23:31Z")
> [@thinking bout new wheels for the titan](https://forums.speedlife.net/t/thinking-bout-new-wheels-for-the-titan/41489/11): > > This is one of the nicest engine bay cleanup I’ve seen on a local hatch. Great work! > [@most of u probly wont like me but ill change](https://forums.speedlife.net/t/most-of-u-probly-wont-like-me-but-ill-change/41533/48): > > and it’s cool to watch the play by play updates… Gets motivating > > Keep it up! > [@My entire car history](https://forums.speedlife.net/t/my-entire-car-history/41524/13): > > Very nice very nice attenion to detail,thats how i was doing my turd gen! ---
**Author:** ![Rogueeg6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rogueeg6/32/6060_2.png) [@Rogueeg6](https://forums.speedlife.net/u/Rogueeg6)\ **Post date:** [November 7, 2009, 6:35am UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/199 "2009-11-07T06:35:40Z")
. ---
**Author:** ![cleanquick306](https://avatars.discourse-cdn.com/v4/letter/c/48db29/32.png) [@cleanquick306](https://forums.speedlife.net/u/cleanquick306)\ **Post date:** [November 7, 2009, 8:22am UTC](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062/200 "2009-11-07T08:22:54Z")
Ridiculously nice work. [Previous page](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062.md?page=9) [Next page](https://forums.speedlife.net/t/honda-civic-build-thread-in-wv/202062.md?page=11)