# Honda guys- a few easy and quick questions **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [February 4, 2010, 7:09pm UTC](https://forums.speedlife.net/t/honda-guys-a-few-easy-and-quick-questions/78965 "2010-02-04T19:09:38Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\ **Post date:** [February 4, 2010, 7:09pm UTC](https://forums.speedlife.net/t/honda-guys-a-few-easy-and-quick-questions/78965/1 "2010-02-04T19:09:38Z")
1. What throttle cable should I use for a b18 in an eg civic? The stock civic one doesn’t reach the tb i’ll update this again when i have more questions bc im sure i will… Thanks guys ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [February 4, 2010, 7:32pm UTC](https://forums.speedlife.net/t/honda-guys-a-few-easy-and-quick-questions/78965/2 "2010-02-04T19:32:32Z")
> [@Jam"](#): > > 1. Are auto and 5 speed ls teg axles the same? > 2. What ecu do I need to run an obd1 ls motor in an eg civic? Someone said that the exsisting ecu for the stock d15 will work, I doubt this > 3. Shift linkage for a b18 eg- do I need aftermarket linkage or will the stock b series linkage work? > 4. Rad hoses and throttle cable- exsisting civic ones or teg ones? > 5. I think I know the answer to this but will the b18 headers line up with the exsisting exhaust? I’m guessing no… > 6. will the civic Clutch master work with the b18 slave? > > Thanks guys 1. not sure, i know intermediate shafts are different but pretty sure the axles are the same 2)p75 obd1 ecu, stock d15 will run it, but not good as b18 requires alot more fuel than d15 3)stock b series 94+ linkage will work (no del sol) 4)teg ones, with the ends modified to fit the smaller civic outlets (or get 99-00 si rad for b hoses) 5)depends, some will some wont, depends on from ls/gsr/r and the year etc 6)absolutely ---
**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\ **Post date:** [February 4, 2010, 9:19pm UTC](https://forums.speedlife.net/t/honda-guys-a-few-easy-and-quick-questions/78965/3 "2010-02-04T21:19:21Z")
Sweet dude. Thanks. Now I just need to know #1 and if I’m going to the junkyard sat ie. axles from an auto haha ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [February 4, 2010, 11:42pm UTC](https://forums.speedlife.net/t/honda-guys-a-few-easy-and-quick-questions/78965/4 "2010-02-04T23:42:59Z")
im pretty sure they are the same, after searching around im 99% they are the same, its the mid shaft thats different (one bolted to block) ---
**Author:** ![Karter](https://avatars.discourse-cdn.com/v4/letter/k/e480ec/32.png) [@Karter](https://forums.speedlife.net/u/Karter)\ **Post date:** [February 4, 2010, 11:56pm UTC](https://forums.speedlife.net/t/honda-guys-a-few-easy-and-quick-questions/78965/5 "2010-02-04T23:56:25Z")
yes ill confirm, axels are the same, mid is different ---
**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\ **Post date:** [February 6, 2010, 9:19am UTC](https://forums.speedlife.net/t/honda-guys-a-few-easy-and-quick-questions/78965/6 "2010-02-06T09:19:35Z")
Alright so I’m kind of having a hard time finding b series linkage and I think I’m jut going to bite the bullet and get hasport stuff new. What is the diffrence (if any) of reg stock b series linkage and the hasport b series eg shift linkage? Thanks ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [February 6, 2010, 9:28am UTC](https://forums.speedlife.net/t/honda-guys-a-few-easy-and-quick-questions/78965/7 "2010-02-06T09:28:40Z")
i can get you a linkage no problem, and there is no difference between the 2 except the price ---
**Author:** ![Carnut](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carnut/32/7590_2.png) [@Carnut](https://forums.speedlife.net/u/Carnut)\ **Post date:** [February 6, 2010, 9:50am UTC](https://forums.speedlife.net/t/honda-guys-a-few-easy-and-quick-questions/78965/8 "2010-02-06T09:50:16Z")
Just order it from our engine vendor here on the forum. He should have linkage. The axles are different. ---
**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\ **Post date:** [February 6, 2010, 4:29pm UTC](https://forums.speedlife.net/t/honda-guys-a-few-easy-and-quick-questions/78965/9 "2010-02-06T16:29:01Z")
Don do you mean that stock b series axles won’t fit the civic hubs? And what about the throttle cable? Civic or teg? ---
**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\ **Post date:** [February 11, 2010, 11:07am UTC](https://forums.speedlife.net/t/honda-guys-a-few-easy-and-quick-questions/78965/10 "2010-02-11T11:07:49Z")
bump new question for the honda people! ---
**Author:** ![AShort](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ashort/32/4947_2.png) [@AShort](https://forums.speedlife.net/u/AShort)\ **Post date:** [February 11, 2010, 11:12am UTC](https://forums.speedlife.net/t/honda-guys-a-few-easy-and-quick-questions/78965/11 "2010-02-11T11:12:26Z")
oil pans are the same. ---
**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\ **Post date:** [February 11, 2010, 11:13am UTC](https://forums.speedlife.net/t/honda-guys-a-few-easy-and-quick-questions/78965/12 "2010-02-11T11:13:27Z")
yay! ---
**Author:** ![VANDIT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/vandit/32/4977_2.png) [@VANDIT](https://forums.speedlife.net/u/VANDIT)\ **Post date:** [February 11, 2010, 12:21pm UTC](https://forums.speedlife.net/t/honda-guys-a-few-easy-and-quick-questions/78965/13 "2010-02-11T12:21:14Z")
> [@Jam](#): > > Don do you mean that stock b series axles won’t fit the civic hubs? And what about the throttle cable? Civic or teg? stock b series manual trans axles WILL fit into stock civic hubs (eg anyways) And for the throttle cable, teg