# Honda Guys : Lets Talk

**URL:** <https://forums.speedlife.net/t/honda-guys-lets-talk/77621>\
**Category:** NYSpeed Automotive\
**Created:** [December 27, 2009, 5:32pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621 "2009-12-27T17:32:42Z")\
**Posts on this page:** 20\
**Page:** 4

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [December 28, 2009, 8:56pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/61 "2009-12-28T20:56:40Z")

</div>

> [@lsvtechatch](#):
>
> I have an 1.9l ls/vtec build that is like 98% complete. Its n/a and should put low 200whp down. pm if your interested. its all bolting things on to complete it.

why not put the setup here, id like to see it

---

<div class="post-metadata">

**Author:** ![lsvtechatch](https://avatars.discourse-cdn.com/v4/letter/l/e5b9ba/32.png) [@lsvtechatch](https://forums.speedlife.net/u/lsvtechatch)\
**Post date:** [December 29, 2009, 10:12am UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/62 "2009-12-29T10:12:26Z")

</div>

Engine

Block : B18A1: Bored .03 : Balanced to 10,000RPMS   
RS Machine PR3 Pistons   
Shotpeened, honed LS Rods   
B16 Oil Pickup   
B16 Windage Tray   
Moroso Aluminum Race Oil Pan   
CTR N1 Crank Pulley   
ITR Oil Pump   
ITR Water Pump   
ITR Belt Tensioner   
Golden Eagle LS/VTEC Kit   
ACL Main Bearings   
ACL Rod Bearings   
ARP Rod Bolts   
ARP Main Bolts   
Hastings Piston Rings

Head : ITR : Stage 3 P&P : 3 Angle Valve Job : Decked .010   
Supertech Flat-top Valves   
Rocket Motorsports Gen 1 Dual Valve Springs   
Rocket Motorsports Titanium Retainers   
Skunk2 Tuner Series Cam Gears   
Skunk2 Pro 2 Cams   
Skunk2 Portmatched 1 Gen Intake Manifold   
Edelbrock TB Spacer   
P2R Throttle body gasket   
Edelbrock Portmatched 70mm Throttle Body   
AEM 3in aluminum Intake   
Bpi 3in Flow Stack and K&N Filter   
ARP Headstuds   
King Motorsprorts Extended IM Studs   
King Motorsports Extended Exhaust Manifold Studs   
Hytech Big Tube B20 Header

Fuel and Ignition   
Walbro 255lph Fuel Pump   
Aeromotive Fuel Rail   
Aeromotive Fuel Pressure Regulator   
RC Engineering 440cc Injectors   
RC Engineering Injector Clips   
Rywire OBD1 Distributor   
Magnecor 9mm Wires   
Innovative Wideband

Transmission   
JDM S80   
Stock LSD   
ATS 4.9 FD   
Action 1 MD Clutch   
ACT Streetlight 12lb Flywheel   
ARP Clutch Bolts   
ARP Flywheel Bolts

---

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [December 29, 2009, 10:15am UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/63 "2009-12-29T10:15:44Z")

</div>

seems like a nice setup, keep an eye on those valve springs as ive had a couple break on me

---

<div class="post-metadata">

**Author:** ![slowa\_ek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slowa_ek/32/5227_2.png) [@slowa\_ek](https://forums.speedlife.net/u/slowa_ek)\
**Post date:** [December 29, 2009, 12:26pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/64 "2009-12-29T12:26:09Z")

</div>

I would never be able to run an ls/vtec my car is obd2. and there is no stock computer for a hybrid motor like that, so i would have to be running a p28 all the time, then when they go to plug my car in for inspection i hop on the failboat.

But now lets get a bit deeper into the issue here:  
-Say i swap to an obd2 b series and I’m just running it that way before turbo, when i go for my inspection the machine will read that my car is an integra correct? And if it does read that how am i going to pass?  
-Would it be possible to convert an obd1 motor up to obd2a, i know it would involve adjustments to some sensors, a dizzy, and I’m sure some other things. Is this even a plausible idea?

---

<div class="post-metadata">

**Author:** ![Karter](https://avatars.discourse-cdn.com/v4/letter/k/e480ec/32.png) [@Karter](https://forums.speedlife.net/u/Karter)\
**Post date:** [December 29, 2009, 12:28pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/65 "2009-12-29T12:28:58Z")

</div>

the reason nobody wants a y8 is because they oil poorly.

---

<div class="post-metadata">

**Author:** ![slowa\_ek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slowa_ek/32/5227_2.png) [@slowa\_ek](https://forums.speedlife.net/u/slowa_ek)\
**Post date:** [December 29, 2009, 12:33pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/66 "2009-12-29T12:33:51Z")

</div>

> [@lsvtechatch](#):
>
> Engine
> 
> Block : B18A1: Bored .03 : Balanced to 10,000RPMS  
> RS Machine PR3 Pistons  
> Shotpeened, honed LS Rods  
> B16 Oil Pickup  
> B16 Windage Tray  
> Moroso Aluminum Race Oil Pan  
> CTR N1 Crank Pulley  
> ITR Oil Pump  
> ITR Water Pump  
> ITR Belt Tensioner  
> Golden Eagle LS/VTEC Kit  
> ACL Main Bearings  
> ACL Rod Bearings  
> ARP Rod Bolts  
> ARP Main Bolts  
> Hastings Piston Rings
> 
> Head : ITR : Stage 3 P&P : 3 Angle Valve Job : Decked .010  
> Supertech Flat-top Valves  
> Rocket Motorsports Gen 1 Dual Valve Springs  
> Rocket Motorsports Titanium Retainers  
> Skunk2 Tuner Series Cam Gears  
> Skunk2 Pro 2 Cams  
> Skunk2 Portmatched 1 Gen Intake Manifold  
> Edelbrock TB Spacer  
> P2R Throttle body gasket  
> Edelbrock Portmatched 70mm Throttle Body  
> AEM 3in aluminum Intake  
> Bpi 3in Flow Stack and K&N Filter  
> ARP Headstuds  
> King Motorsprorts Extended IM Studs  
> King Motorsports Extended Exhaust Manifold Studs  
> Hytech Big Tube B20 Header
> 
> Fuel and Ignition  
> Walbro 255lph Fuel Pump  
> Aeromotive Fuel Rail  
> Aeromotive Fuel Pressure Regulator  
> RC Engineering 440cc Injectors  
> RC Engineering Injector Clips  
> Rywire OBD1 Distributor  
> Magnecor 9mm Wires  
> Innovative Wideband
> 
> Transmission  
> JDM S80  
> Stock LSD  
> ATS 4.9 FD  
> Action 1 MD Clutch  
> ACT Streetlight 12lb Flywheel  
> ARP Clutch Bolts  
> ARP Flywheel Bolts

post up some pics, does everything have receipts? What would your asking price be around, generally speaking

---

<div class="post-metadata">

**Author:** ![slowa\_ek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slowa_ek/32/5227_2.png) [@slowa\_ek](https://forums.speedlife.net/u/slowa_ek)\
**Post date:** [December 29, 2009, 12:38pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/67 "2009-12-29T12:38:04Z")

</div>

> [@Just Karter](#):
>
> the reason nobody wants a y8 is because they oil poorly.

Don’t give me that bull, i have seen tons of d series builds and turbo setups running 400+whp, its because the b is a better performance platform and the d is an economy based motor plain and simple

Please don’t shit up this thread, people who have owned real hondas are talking. Not the piles of scrap ef/eg garbage you are either driving and or trying to part out

---

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [December 29, 2009, 12:41pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/68 "2009-12-29T12:41:50Z")

</div>

> [@slowa$$ek](#):
>
> I would never be able to run an ls/vtec my car is obd2. and there is no stock computer for a hybrid motor like that, so i would have to be running a p28 all the time, then when they go to plug my car in for inspection i hop on the failboat.
> 
> But now lets get a bit deeper into the issue here:  
> -Say i swap to an obd2 b series and I’m just running it that way before turbo, when i go for my inspection the machine will read that my car is an integra correct? And if it does read that how am i going to pass?  
> -Would it be possible to convert an obd1 motor up to obd2a, i know it would involve adjustments to some sensors, a dizzy, and I’m sure some other things. Is this even a plausible idea?

as far as i know NY standards arent as strict as other states, the motor should be the same year of the car or newer

and getting it to pass inpsection with a turbo is easy

just use a stock gsr/b16 ecu for the year of your car and make sure you have o2 sensors and a catalytic converter and stock injectors

---

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [December 29, 2009, 12:42pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/69 "2009-12-29T12:42:48Z")

</div>

> [@slowa$$ek](#):
>
> Don’t give me that bull, i have seen tons of d series builds and turbo setups running 400+whp, its because the b is a better performance platform and the d is an economy based motor plain and simple
> 
> Please don’t shit up this thread, people who have owned real hondas are talking. Not the piles of scrap ef/eg garbage you are either driving and or trying to part out

he is correct with his statement about the y8’s, they are known to have shitty oil systems and throw bearings pretty easily

---

<div class="post-metadata">

**Author:** ![mindless](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mindless/32/7286_2.png) [@mindless](https://forums.speedlife.net/u/mindless)\
**Post date:** [December 29, 2009, 12:52pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/70 "2009-12-29T12:52:50Z")

</div>

I know ive been posting in here already, but wtf does there really need to be threads on things that have been covered over a million times on the internet. Make 300hp in a honda is not that big of a deal. And its been done for years and years, maybe just do research and figure out what you want to do instead of asking for input that your not going to take anyways.

---

<div class="post-metadata">

**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\
**Post date:** [December 29, 2009, 1:27pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/71 "2009-12-29T13:27:40Z")

</div>

i say no to dseries because the trannys are weak. you could get away with the built NA bseries, you just need a stock bseries obd2 ecu to plug in come inspection time.

---

<div class="post-metadata">

**Author:** ![slowa\_ek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slowa_ek/32/5227_2.png) [@slowa\_ek](https://forums.speedlife.net/u/slowa_ek)\
**Post date:** [December 29, 2009, 2:47pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/72 "2009-12-29T14:47:28Z")

</div>

> [@mindless](#):
>
> I know ive been posting in here already, but wtf does there really need to be threads on things that have been covered over a million times on the internet. Make 300hp in a honda is not that big of a deal. And its been done for years and years, maybe just do research and figure out what you want to do instead of asking for input that your not going to take anyways.

I am taking input I am getting from this thread. I understand how to build a honda motor I understand how to turbo a motor. I know a lot of things about honda, maybe not as much as you and some other hardcore people. But that is why I’m trying to learn. I had/have a game plan in my head, I was just trying to see what other people thought as well.

Karter you have my appoligies

---

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [December 29, 2009, 3:00pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/73 "2009-12-29T15:00:44Z")

</div>

you stil havent answered what you will be using this car for?

what do you want to do with it, what are your goals

---

<div class="post-metadata">

**Author:** ![shocker911](https://avatars.discourse-cdn.com/v4/letter/s/c0e974/32.png) [@shocker911](https://forums.speedlife.net/u/shocker911)\
**Post date:** [December 29, 2009, 3:16pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/74 "2009-12-29T15:16:42Z")

</div>

I have a built LS vtec in my garage it didnt cost me much-this is what i have in mine

B18a-50 bucks  
B16 head-450  
LS-Vtec kit-70 bucks  
head studs-120  
rods-250  
pistons-400  
machine work and assembly-540  
im running a LS trans that i got for 300  
CC clutch-250  
light weight flywheel-60  
skunk2 intake mani-175

a lot of my parts were used besides headstuds,pistons,rods. i have about 2500 into my build. not counting my turbo kit and tune

turbo kit  
top mount-500  
precesion SC44 turbo-150 (needs rebuild which will cost 150)  
Tial 44mm (still looking)  
HKS bov 50  
IC 60

its not that hard to find deals. this time is when people are selling there things to upgrade for next season.

1 question why would you build a D and not the B series?

i dont know where you are located but there WAS a OBD2 LS i think from a 98 integra at pick a part in horsheads new york whole swap would cost 350 motor tranny ecu harness axels

---

<div class="post-metadata">

**Author:** ![slowa\_ek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slowa_ek/32/5227_2.png) [@slowa\_ek](https://forums.speedlife.net/u/slowa_ek)\
**Post date:** [December 29, 2009, 3:35pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/75 "2009-12-29T15:35:58Z")

</div>

> [@Saxon](#):
>
> you stil havent answered what you will be using this car for?
> 
> what do you want to do with it, what are your goals

Honestly I’m just trying to build an all around car. Good handling, looks clean, 13sec ish quarter mile times. Not really much just a reliable street car

---

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [December 29, 2009, 5:05pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/76 "2009-12-29T17:05:24Z")

</div>

you could do that with a greddy kit on sohc vtec no problem at all!

---

<div class="post-metadata">

**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\
**Post date:** [December 29, 2009, 7:58pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/77 "2009-12-29T19:58:16Z")

</div>

> [@shocker911](#):
>
> i dont know where you are located but there WAS a OBD2 LS i think from a 98 integra at pick a part in horsheads new york whole swap would cost 350 motor tranny ecu harness axels

fuck. horsehead was the absolute shittiest roadtrip i ever took for parts in my life lol. 86/390 fucking sucks

After i sell my dsm i would still like to build an allmotor integra :meh:  
going fast isnt really that cool, i prefer handling…but if u can do both that’s great

---

<div class="post-metadata">

**Author:** ![slowa\_ek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slowa_ek/32/5227_2.png) [@slowa\_ek](https://forums.speedlife.net/u/slowa_ek)\
**Post date:** [December 30, 2009, 8:50am UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/78 "2009-12-30T08:50:55Z")

</div>

> [@Saxon](#):
>
> you could do that with a greddy kit on sohc vtec no problem at all!

Your kidding or serious?

I figured around 300 was needed to get into the 13s. And I’m semi intrigued by the all motor idea, obv not an all motor d

---

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [December 30, 2009, 9:23am UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/79 "2009-12-30T09:23:19Z")

</div>

i had 210 whp and ran a 13.4 with true street tires and in a full weight integra

a greddy kit will absolutely get you into the 13’s

that all motor b is good for mid high 13’s on street tires and low 13’ high 12’s on slicks

---

<div class="post-metadata">

**Author:** ![mindless](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mindless/32/7286_2.png) [@mindless](https://forums.speedlife.net/u/mindless)\
**Post date:** [December 30, 2009, 1:19pm UTC](https://forums.speedlife.net/t/honda-guys-lets-talk/77621/80 "2009-12-30T13:19:47Z")

</div>

i went 11.9 on less than 300whp

[Previous page](https://forums.speedlife.net/t/honda-guys-lets-talk/77621.md?page=3)

[Next page](https://forums.speedlife.net/t/honda-guys-lets-talk/77621.md?page=5)
