# Honda Linkage Pin Tool **URL:** \ **Category:** Classifieds\ **Created:** [March 2, 2010, 7:57pm UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895 "2010-03-02T19:57:16Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\ **Post date:** [March 2, 2010, 7:57pm UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/1 "2010-03-02T19:57:16Z")
anyone have one i can borrow for a few hours? i’d buy one but i know i’ll prob never use it again. thanks ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [March 2, 2010, 8:28pm UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/2 "2010-03-02T20:28:59Z")
[http://www.performanceforum.com/wesvann/honda/bitch/bitch.html](http://www.performanceforum.com/wesvann/honda/bitch/bitch.html) that or buy a roll pin punch (like 5 bucks) ---
**Author:** ![ctspoolintsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ctspoolintsi/32/7456_2.png) [@ctspoolintsi](https://forums.speedlife.net/u/ctspoolintsi)\ **Post date:** [March 2, 2010, 8:31pm UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/3 "2010-03-02T20:31:52Z")
lol sent him same link in pm. mine came right out with flat head in 2 hits. maybe i just got lucky 🙂 ---
**Author:** ![JDMSIR](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdmsir/32/7376_2.png) [@JDMSIR](https://forums.speedlife.net/u/JDMSIR)\ **Post date:** [March 2, 2010, 8:32pm UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/4 "2010-03-02T20:32:21Z")
↑ Nice link. ---
**Author:** ![Detective\_Coating](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/detective_coating/32/5319_2.png) [@Detective\_Coating](https://forums.speedlife.net/u/Detective_Coating)\ **Post date:** [March 2, 2010, 8:35pm UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/5 "2010-03-02T20:35:12Z")
Use an air chisel if you have one. It worked quickest for Saxon and I last week. We tried a ton of things around the garage and like always it was a bitch but the air chisel took it right out. ---
**Author:** ![95d16turbo](https://avatars.discourse-cdn.com/v4/letter/9/977dab/32.png) [@95d16turbo](https://forums.speedlife.net/u/95d16turbo)\ **Post date:** [March 2, 2010, 10:19pm UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/6 "2010-03-02T22:19:00Z")
i have a punch that fits perfectly for that pin. PM me if you wanna borrow it. ---
**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\ **Post date:** [March 2, 2010, 10:58pm UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/7 "2010-03-02T22:58:57Z")
ive NEVER had trouble getting mine out with the correct size punch. ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [March 3, 2010, 8:57am UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/8 "2010-03-03T08:57:40Z")
the punch size is 8mm i think, if you wanted to buy one ---
**Author:** ![95civiclx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/95civiclx/32/7343_2.png) [@95civiclx](https://forums.speedlife.net/u/95civiclx)\ **Post date:** [March 3, 2010, 9:15am UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/9 "2010-03-03T09:15:18Z")
I had a nail set that I “machined” down with an angle grinder to 8mm. It worked decent. But that link is awesome. I wish I had seen or thought of that at the time. > [@Saxon](#): > > [Removing the "bitch pin" without using a hammer](http://www.performanceforum.com/wesvann/honda/bitch/bitch.html) ---
**Author:** ![stmotorsports](https://avatars.discourse-cdn.com/v4/letter/s/bb73d2/32.png) [@stmotorsports](https://forums.speedlife.net/u/stmotorsports)\ **Post date:** [March 3, 2010, 10:43am UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/10 "2010-03-03T10:43:22Z")
> [@BREETIME](#): > > ive NEVER had trouble getting mine out with the correct size punch. ^^ I don’t think I’ve ever had one that was in there so tight that I had to really wail on it, I normally just have to tap them out. If it’s too much on the tighter side I crunch the pin down a little bit to loosen it up so its just snug, the surrounding clip prevents it from going anywhere anyways although that link is definitely the more correcter way of doing it ---
**Author:** ![Draftinwitjr3815](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/draftinwitjr3815/32/5349_2.png) [@Draftinwitjr3815](https://forums.speedlife.net/u/Draftinwitjr3815)\ **Post date:** [March 3, 2010, 5:22pm UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/11 "2010-03-03T17:22:13Z")
> [@stmotorsports](#): > > although that link is definitely the more _correcter_ way of doing it 404 Word not found in dictionary, lol… Yea this pin is a bitch, but I didn’t have the right tool to get it out… ---
**Author:** ![AShort](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ashort/32/4947_2.png) [@AShort](https://forums.speedlife.net/u/AShort)\ **Post date:** [March 3, 2010, 6:19pm UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/12 "2010-03-03T18:19:34Z")
> [@esford90](#): > > the punch size is 8mm i think, if you wanted to buy one x2, its a 8mm punch ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [March 3, 2010, 9:37pm UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/13 "2010-03-03T21:37:41Z")
> [@AShort](#): > > x2, its a 8mm punch i thought so, the 8mm punch works perfect and its less than 5 bucks ---
**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\ **Post date:** [March 3, 2010, 9:38pm UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/14 "2010-03-03T21:38:46Z")
got one today from 95d16turbo. thanks! ---
**Author:** ![Draftinwitjr3815](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/draftinwitjr3815/32/5349_2.png) [@Draftinwitjr3815](https://forums.speedlife.net/u/Draftinwitjr3815)\ **Post date:** [March 4, 2010, 5:25am UTC](https://forums.speedlife.net/t/honda-linkage-pin-tool/79895/15 "2010-03-04T05:25:56Z")
Jam I’ll txt you today, I sold the Supra and the guy wants to come pick it up tomorrow night, so I will be around if you wanna fight the axles and the bitch pin some more.