# Honda parts galore. **URL:** \ **Category:** Classifieds\ **Created:** [June 10, 2011, 9:20pm UTC](https://forums.speedlife.net/t/honda-parts-galore/258872 "2011-06-10T21:20:00Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Jeremiah](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeremiah/32/6318_2.png) [@Jeremiah](https://forums.speedlife.net/u/Jeremiah)\ **Post date:** [June 10, 2011, 9:20pm UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/1 "2011-06-10T21:20:00Z")
**Selling everything Civic/Integra related…everything is located in 12078 Gloversville NY. I can ship all items except the quarter panels.** Paypal ready. **If you aren’t ready to buy…please do not waste my time. Serious interest only.** **Nrg 3point strut tower bar. - SOLD** **Sparco B-pillar/harness bar. - SOLD** **EG Hatch replacement quarter panels. - SOLD** **Cheepo steeringwheel(red stitching) - SOLD** **JDM ITR rear seats with Bride material. - SOLD** **JDM ITR rods w/ARP rodbolts(pistons still attached 3 good/1 annihilated) -SOLD** **Pioneer Carrozzeria tweeters(EG). - SOLD** **Function and Form lca’s. - SOLD** **Gsport “The Beast” starter(for high comp engines). - SOLD** **JDM ITR valvcover…cut for camgears. - $75** ![http://i206.photobucket.com/albums/bb29/shanegray22/PICT0008.jpg](http://i206.photobucket.com/albums/bb29/shanegray22/PICT0008.jpg) **VAFC2 with plug&play Boomslang harness(OBD1) - $200** ![http://i7.photobucket.com/albums/y270/thejeremiah/HT%20sale/vafcbs.jpg](http://i7.photobucket.com/albums/y270/thejeremiah/HT%20sale/vafcbs.jpg) **WingsWest urethane rear lip - $100** ![http://i7.photobucket.com/albums/y270/thejeremiah/100_6580.jpg](http://i7.photobucket.com/albums/y270/thejeremiah/100_6580.jpg) **Gathers rear speakers(grey grills) Fits USDM EG interiors - $250** ![http://i7.photobucket.com/albums/y270/thejeremiah/MOAR%20PARTS/IMG_0724.jpg](http://i7.photobucket.com/albums/y270/thejeremiah/MOAR%20PARTS/IMG_0724.jpg) **Earls stainless steel brake lines 92-95Si(believe Delsol Si/SiVtec also) - $90** ![http://i7.photobucket.com/albums/y270/thejeremiah/MOAR%20PARTS/100_2348.jpg](http://i7.photobucket.com/albums/y270/thejeremiah/MOAR%20PARTS/100_2348.jpg) **Powered VIS carbon fiber mirrors for 94-01 Integra**. I bought these a few years ago for $425 and have sat in my parts room since. The glass needs to be glued and the wires need to be extended. This is exactly how I got them when I bought them. **$275** ![http://i7.photobucket.com/albums/y270/thejeremiah/ForSale/100_2395.jpg](http://i7.photobucket.com/albums/y270/thejeremiah/ForSale/100_2395.jpg) Imperfection in the clear. ![http://i7.photobucket.com/albums/y270/thejeremiah/ForSale/100_2396.jpg](http://i7.photobucket.com/albums/y270/thejeremiah/ForSale/100_2396.jpg) **Carbonall carbonfiber cargo cover for 94-01 Integra.** Don’t remember what member I bought this from, but it was around the same time as the mirrors. Has also just sat in my parts room. **$125** ![http://i7.photobucket.com/albums/y270/thejeremiah/ForSale/100_2397.jpg](http://i7.photobucket.com/albums/y270/thejeremiah/ForSale/100_2397.jpg) Imperfections/scuffs in the clear. ![http://i7.photobucket.com/albums/y270/thejeremiah/ForSale/100_2398.jpg](http://i7.photobucket.com/albums/y270/thejeremiah/ForSale/100_2398.jpg) ![http://i7.photobucket.com/albums/y270/thejeremiah/ForSale/100_2400.jpg](http://i7.photobucket.com/albums/y270/thejeremiah/ForSale/100_2400.jpg) Thanks - Jeremiah ---
**Author:** ![Weirdooh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/weirdooh/32/6569_2.png) [@Weirdooh](https://forums.speedlife.net/u/Weirdooh)\ **Post date:** [June 11, 2011, 7:50am UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/2 "2011-06-11T07:50:46Z")
Hey buddy, Looks like you’re ready to change things up. Not sure if I have your phone number, better send it again. I’m sure you must have something I need, always wanted to try that shifter. We need to get together sometime, LMK if you make it over this way, I’ll buy you lunch. ~Paul ---
**Author:** ![psi2high](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/psi2high/32/6320_2.png) [@psi2high](https://forums.speedlife.net/u/psi2high)\ **Post date:** [June 11, 2011, 8:16am UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/3 "2011-06-11T08:16:11Z")
Ill take the noncut valve cover ---
**Author:** ![Jeremiah](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeremiah/32/6318_2.png) [@Jeremiah](https://forums.speedlife.net/u/Jeremiah)\ **Post date:** [June 11, 2011, 9:04am UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/4 "2011-06-11T09:04:11Z")
> [@Pics of my build](https://forums.speedlife.net/t/pics-of-my-build/42941/21): > > Hey buddy, Looks like you’re ready to change things up. Not sure if I have your phone number, better send it again. I’m sure you must have something I need, always wanted to try that shifter. We need to get together sometime, LMK if you make it over this way, I’ll buy you lunch. > > ~Paul Hey Paul. Ya…going RWD next. I’m Pm you my number. > [@O S!\*t](https://forums.speedlife.net/t/o-s-t/42951/5): > > Ill take the noncut valve cover Sorry…saw Joey’s Pm before this. ---
**Author:** ![psi2high](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/psi2high/32/6320_2.png) [@psi2high](https://forums.speedlife.net/u/psi2high)\ **Post date:** [June 11, 2011, 9:11am UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/5 "2011-06-11T09:11:52Z")
Tell Joey to go to hell ---
**Author:** ![ReDevil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redevil/32/6385_2.png) [@ReDevil](https://forums.speedlife.net/u/ReDevil)\ **Post date:** [June 11, 2011, 10:54am UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/6 "2011-06-11T10:54:02Z")
I would love that gathers setup, but I cant justify it right now. Did you actually install those? How much of a project is it? ---
**Author:** ![Jeremiah](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeremiah/32/6318_2.png) [@Jeremiah](https://forums.speedlife.net/u/Jeremiah)\ **Post date:** [June 11, 2011, 12:05pm UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/7 "2011-06-11T12:05:49Z")
B16 VC sold. AEM fpr pending. Redevil…had them in my car for 3 years. One of the 4 speakers is blown, I just yanked it and used 3, never bothered with replacing it but I still have it. Still sounded great. Not hard to install at all, just little shit like pulling the rear seats and panels to get to the OEM tabs to mount…and a handful of screws for them to screw into the panels. It took me like 30min from start to finish. My Si was already prewired for optional OEM speakers so they were plug&play. I think DX/CX/VC weren’t so you might just have to run wire from your headunit if that’s what you have. Here’s an old pic of them in my car. ![http://i7.photobucket.com/albums/y270/thejeremiah/Eh3/100_2144.jpg](http://i7.photobucket.com/albums/y270/thejeremiah/Eh3/100_2144.jpg) ---
**Author:** ![Jeremiah](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeremiah/32/6318_2.png) [@Jeremiah](https://forums.speedlife.net/u/Jeremiah)\ **Post date:** [June 12, 2011, 10:16am UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/8 "2011-06-12T10:16:02Z")
FPR sold. Parts can be delivered to the Albany are by Cliff. ---
**Author:** ![ReDevil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redevil/32/6385_2.png) [@ReDevil](https://forums.speedlife.net/u/ReDevil)\ **Post date:** [June 12, 2011, 10:20am UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/9 "2011-06-12T10:20:06Z")
Is the whole shell sold, or are you willing to part the tailgate? ---
**Author:** ![Jeremiah](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeremiah/32/6318_2.png) [@Jeremiah](https://forums.speedlife.net/u/Jeremiah)\ **Post date:** [June 12, 2011, 2:25pm UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/10 "2011-06-12T14:25:15Z")
I told the people that are interested in the complete shell that they have until Thursday night to hand over cash or else it’s definately getting parted. That way I can spend Friday making a list of who exactly want’s what parts. The tailgate isn’t perfect…I think there’s a spot or two of rust and maybe a small dent. I’ll have a look at it tomorrow. ---
**Author:** ![Justin\_GSR](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justin_gsr/32/6412_2.png) [@Justin\_GSR](https://forums.speedlife.net/u/Justin_GSR)\ **Post date:** [June 13, 2011, 11:44am UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/11 "2011-06-13T11:44:47Z")
you have pm ---
**Author:** ![Jeremiah](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeremiah/32/6318_2.png) [@Jeremiah](https://forums.speedlife.net/u/Jeremiah)\ **Post date:** [June 15, 2011, 5:12pm UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/12 "2011-06-15T17:12:04Z")
Pm’s returned. Photobucket is down for maintenance at the moment…sorry if some of the pics aren’t currently working. ---
**Author:** ![Jeremiah](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeremiah/32/6318_2.png) [@Jeremiah](https://forums.speedlife.net/u/Jeremiah)\ **Post date:** [June 19, 2011, 7:08pm UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/13 "2011-06-19T19:08:48Z")
NRG quickrelease sold…Thank you Justin. ---
**Author:** ![IHATEMYLIVER](https://avatars.discourse-cdn.com/v4/letter/i/cdc98d/32.png) [@IHATEMYLIVER](https://forums.speedlife.net/u/IHATEMYLIVER)\ **Post date:** [June 24, 2011, 6:55am UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/14 "2011-06-24T06:55:42Z")
check your PM’s ---
**Author:** ![Jeremiah](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeremiah/32/6318_2.png) [@Jeremiah](https://forums.speedlife.net/u/Jeremiah)\ **Post date:** [July 14, 2011, 8:35pm UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/15 "2011-07-14T20:35:36Z")
Original post updated. Everything listed is still for sale…everything that’s been taken down was either sold or stolen. ---
**Author:** ![ReDevil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redevil/32/6385_2.png) [@ReDevil](https://forums.speedlife.net/u/ReDevil)\ **Post date:** [July 14, 2011, 8:47pm UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/16 "2011-07-14T20:47:14Z")
Is the Momo Mod78 and the hub for the EG spline right? Looks like a quick release also? ---
**Author:** ![Jeremiah](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeremiah/32/6318_2.png) [@Jeremiah](https://forums.speedlife.net/u/Jeremiah)\ **Post date:** [July 15, 2011, 2:11pm UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/17 "2011-07-15T14:11:29Z")
Correct…EG/DC column. Quick release was sold to Justin. ---
**Author:** ![IHATEMYLIVER](https://avatars.discourse-cdn.com/v4/letter/i/cdc98d/32.png) [@IHATEMYLIVER](https://forums.speedlife.net/u/IHATEMYLIVER)\ **Post date:** [July 18, 2011, 7:14am UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/18 "2011-07-18T07:14:35Z")
How about the cluster you have or had? ---
**Author:** ![Jeremiah](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeremiah/32/6318_2.png) [@Jeremiah](https://forums.speedlife.net/u/Jeremiah)\ **Post date:** [July 20, 2011, 5:22pm UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/19 "2011-07-20T17:22:13Z")
Sorry bud…been stupid busy. Cf cluster was sold to a local friend. ---
**Author:** ![Jeremiah](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeremiah/32/6318_2.png) [@Jeremiah](https://forums.speedlife.net/u/Jeremiah)\ **Post date:** [August 1, 2011, 4:54pm UTC](https://forums.speedlife.net/t/honda-parts-galore/258872/20 "2011-08-01T16:54:57Z")
Up. [Next page](https://forums.speedlife.net/t/honda-parts-galore/258872.md?page=2)