# Hondata Gasket

**URL:** <https://forums.speedlife.net/t/hondata-gasket/13852>\
**Category:** NYSpeed Automotive\
**Created:** [June 27, 2006, 7:40am UTC](https://forums.speedlife.net/t/hondata-gasket/13852 "2006-06-27T07:40:24Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\
**Post date:** [June 27, 2006, 7:40am UTC](https://forums.speedlife.net/t/hondata-gasket/13852/1 "2006-06-27T07:40:24Z")

</div>

I have heard a butt load of good things about these and I understand how they work SO i picked one up. Hondata BLUE gasket for my B18C1. BUT I noticed that it only has one hole in it where the radiator lines go. I thought the OEM gaskets have 2 holes…wrong or nah?  
ALSO im worried about the stud length, I think with my Skunk2 IMO and this thicker gasket the studs will be to short? Should i shave the IMO down a bit on the nut side or get longer studs?

---

<div class="post-metadata">

**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\
**Post date:** [June 27, 2006, 6:48pm UTC](https://forums.speedlife.net/t/hondata-gasket/13852/2 "2006-06-27T18:48:41Z")

</div>

no body?

---

<div class="post-metadata">

**Author:** ![Zer0DazE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zer0daze/32/7624_2.png) [@Zer0DazE](https://forums.speedlife.net/u/Zer0DazE)\
**Post date:** [June 28, 2006, 4:40am UTC](https://forums.speedlife.net/t/hondata-gasket/13852/3 "2006-06-28T04:40:32Z")

</div>

longer studs

---

<div class="post-metadata">

**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\
**Post date:** [June 28, 2006, 8:15am UTC](https://forums.speedlife.net/t/hondata-gasket/13852/4 "2006-06-28T08:15:23Z")

</div>

so i do need longer studs, where can i pick them up…there not OEM right

---

<div class="post-metadata">

**Author:** ![Freek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/freek/32/7357_2.png) [@Freek](https://forums.speedlife.net/u/Freek)\
**Post date:** [June 28, 2006, 8:37am UTC](https://forums.speedlife.net/t/hondata-gasket/13852/5 "2006-06-28T08:37:05Z")

</div>

hrmm finding the right thread pitch studs might be an issue … i think it’s going to be m12 X 1.75?

someone correct me if i’m wrong here … find out the exact thread and pitch then call round …

sears harware … hectors … the small time harware stores usually carry more obscure thread pitches like stupid honda uses.

---

<div class="post-metadata">

**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\
**Post date:** [June 28, 2006, 10:52am UTC](https://forums.speedlife.net/t/hondata-gasket/13852/6 "2006-06-28T10:52:50Z")

</div>

THERE NOT EASY TO GET OUT TOO!

---

<div class="post-metadata">

**Author:** ![Freek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/freek/32/7357_2.png) [@Freek](https://forums.speedlife.net/u/Freek)\
**Post date:** [June 28, 2006, 10:54am UTC](https://forums.speedlife.net/t/hondata-gasket/13852/7 "2006-06-28T10:54:04Z")

</div>

vise grips … worst case snanario a little heat wrench