# How to remove HICAS

**URL:** https://forums.speedlife.net/t/how-to-remove-hicas/140983
**Category:** Canada Nissan Automotive
**Created:** [December 30, 2005, 6:38pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983 "2005-12-30T18:38:44Z")
**Posts on this page:** 20
**Page:** 1

<div class="post-metadata">

### Author: ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)
#### Post date: [December 30, 2005, 6:38pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/1 "2005-12-30T18:38:44Z")

</div>

This is the how to remove HICAS as many people have asked for it.  
There are two ways, one is with a non-HICAS power steering pump and the other is to just cap off the lines with the supplied fittings.

Here are the basic steps. If you are using a non-HICAS pump.

1. buy a HICAS emiminator  
[![http://img506.imageshack.us/img506/3812/dr014nu.jpg](http://img506.imageshack.us/img506/3812/dr014nu.jpg)](http://imageshack.us)
2. Jack up car
3. on the rear rack there are TWO 17 or 19mm bolts that go thru the subframe. Remove them and the inner tie rods from the rack.
4. PUT A BIG bucket under the rack when you remove the fittings (4 litre’s came out of mine easy)
5. bend lines out of the way.
6. instal is the opposite of reverse.

I highly recomend new tie rods, you can only get them thru Nissan and will cost you 400 for inner, out and the ball joint in the rear spindle.

Also most people remove the lines from the car as they are kinda heavy.

On the passenger side frame rail remove the HICAS solenoid  
[![http://img526.imageshack.us/img526/7818/img02299nm.jpg](http://img526.imageshack.us/img526/7818/img02299nm.jpg)](http://imageshack.us)  
It is heavy and ways a TON. Disconect the electrical connectors and either plug in harness (tomei kit, stops light from comming on) or cut off at main harness.

Remove the lines that run by the steering rack and up to the BACK of the pump.  
[![http://img510.imageshack.us/img510/9404/line19zb.jpg](http://img510.imageshack.us/img510/9404/line19zb.jpg)](http://imageshack.us)  
[![http://img510.imageshack.us/img510/9442/line23yu.jpg](http://img510.imageshack.us/img510/9442/line23yu.jpg)](http://imageshack.us)  
Using the supplied caps plug the outlet  
[![http://img510.imageshack.us/img510/7852/cap3us.jpg](http://img510.imageshack.us/img510/7852/cap3us.jpg)](http://imageshack.us)

If you are using a NON-HICAS pump you will have to cap off one line on your resevoir.  
[![http://img510.imageshack.us/img510/9577/res8bu.jpg](http://img510.imageshack.us/img510/9577/res8bu.jpg)](http://imageshack.us)  
I used JB weld with a vacuum cap.

Attach everything back up and tighten the plug AGAIN.

Enjoy your non\_HICAS car.

If anybody has anything add please feel free. I think it was close to 30 KG that came out. I weighed it but i forget exactly.

---

<div class="post-metadata">

### Author: ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)
#### Post date: [December 31, 2005, 10:23am UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/2 "2005-12-31T10:23:08Z")

</div>

Hmmm, I wonder what kind of difference it would make if I removed the shit from the rear end of the car. I have a non-hicas pump, non-hicas fluid reservior, and all those lines are removed up front. The only thing not removed is the rack in the rear. Think this would affect much? I’m far too lazy to rip that all off. lol.

Only thing is, that my HICAS light always come on on the dash.

---

<div class="post-metadata">

### Author: ![LeRenard](https://avatars.discourse-cdn.com/v4/letter/l/d78d45/32.png) [@LeRenard](https://forums.speedlife.net/u/LeRenard)
#### Post date: [December 31, 2005, 1:28pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/3 "2005-12-31T13:28:46Z")

</div>

Sweet beef dude! Love the write up, it clears up alot of questions.

---

<div class="post-metadata">

### Author: ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)
#### Post date: [December 31, 2005, 1:43pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/4 "2005-12-31T13:43:04Z")

</div>

if you need anymore explanation please let me know and i will edit it.

---

<div class="post-metadata">

### Author: ![imported\_RPS131](https://avatars.discourse-cdn.com/v4/letter/i/dbc845/32.png) [@imported\_RPS131](https://forums.speedlife.net/u/imported_RPS131)
#### Post date: [December 31, 2005, 6:29pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/5 "2005-12-31T18:29:40Z")

</div>

Thanks alot. I’ll begin removing it as soon as I see my car again.

---

<div class="post-metadata">

### Author: ![Invalid\_Zero](https://avatars.discourse-cdn.com/v4/letter/i/ecae2f/32.png) [@Invalid\_Zero](https://forums.speedlife.net/u/Invalid_Zero)
#### Post date: [February 8, 2006, 9:36pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/6 "2006-02-08T21:36:44Z")

</div>

I wonder if that big heavy bastard HICAS solenoid can come out with the engine in place? Maybe pull the alternator?

Ah well worse comes to worse I’ll pull the engine up.

---

<div class="post-metadata">

### Author: ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)
#### Post date: [February 8, 2006, 9:41pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/7 "2006-02-08T21:41:32Z")

</div>

I have no idea man.

My engine was out but it does weigh alot. Also makes the car look alot cleaner becasue the frame rail can be seen instead of a big mess of lines.

---

<div class="post-metadata">

### Author: ![Invalid\_Zero](https://avatars.discourse-cdn.com/v4/letter/i/ecae2f/32.png) [@Invalid\_Zero](https://forums.speedlife.net/u/Invalid_Zero)
#### Post date: [February 8, 2006, 10:31pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/8 "2006-02-08T22:31:07Z")

</div>

How many bolts on that big POS?

I already de-HICASed my PS pump and got a plug for the HICAS side. As per this thread. [http://www.240sxforums.com/forums/showthread.php?t=48280](http://www.240sxforums.com/forums/showthread.php?t=48280)

Got the plug from Edmonton Nut and Bolt.

![http://img.photobucket.com/albums/v209/2003specv/DSC01643.jpg](http://img.photobucket.com/albums/v209/2003specv/DSC01643.jpg)  
 ![http://img.photobucket.com/albums/v209/2003specv/DSC01642.jpg](http://img.photobucket.com/albums/v209/2003specv/DSC01642.jpg)

Woot!

---

<div class="post-metadata">

### Author: ![imported\_RPS131](https://avatars.discourse-cdn.com/v4/letter/i/dbc845/32.png) [@imported\_RPS131](https://forums.speedlife.net/u/imported_RPS131)
#### Post date: [February 8, 2006, 11:47pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/9 "2006-02-08T23:47:13Z")

</div>

From what I can remember, there’s about 3 or 4 bolts holding the HICAS solenoid in.

---

<div class="post-metadata">

### Author: ![6gh6st6](https://avatars.discourse-cdn.com/v4/letter/6/b77776/32.png) [@6gh6st6](https://forums.speedlife.net/u/6gh6st6)
#### Post date: [June 10, 2006, 7:03pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/10 "2006-06-10T19:03:00Z")

</div>

could you post a pic of the bar implace? maybe from a few angles.  
ps. i found this very helpful, im a visual person…now i understand. thanks

---

<div class="post-metadata">

### Author: ![andres\_mt](https://avatars.discourse-cdn.com/v4/letter/a/59ef9b/32.png) [@andres\_mt](https://forums.speedlife.net/u/andres_mt)
#### Post date: [June 23, 2006, 2:01pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/11 "2006-06-23T14:01:49Z")

</div>

Might be a stupid question…but Would removing HICAS allow for a better drift car?

---

<div class="post-metadata">

### Author: ![imported\_BeNDeR](https://avatars.discourse-cdn.com/v4/letter/i/57b2e6/32.png) [@imported\_BeNDeR](https://forums.speedlife.net/u/imported_BeNDeR)
#### Post date: [June 23, 2006, 3:36pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/12 "2006-06-23T15:36:10Z")

</div>

I would think so, seeing as how HICAS turns the rear wheels to help with high speed cornering to keep the car straight, not drifting sideways right?

---

<div class="post-metadata">

### Author: ![andres\_mt](https://avatars.discourse-cdn.com/v4/letter/a/59ef9b/32.png) [@andres\_mt](https://forums.speedlife.net/u/andres_mt)
#### Post date: [June 27, 2006, 8:58am UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/13 "2006-06-27T08:58:37Z")

</div>

Anybody know a good place to get those HICAS Eliminator Bars.???

---

<div class="post-metadata">

### Author: ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)
#### Post date: [June 27, 2006, 9:53am UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/14 "2006-06-27T09:53:39Z")

</div>

There is one for sale on 780 by 95integra. I believe autodream can get them now.

---

<div class="post-metadata">

### Author: ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)
#### Post date: [June 27, 2006, 2:03pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/15 "2006-06-27T14:03:35Z")

</div>

> **[And the first team Edmonton plays in the 06/07 season is....](http://forums.780tuners.com/showthread.php?s=&threadid=44512)**
>
> Edmonton Car Forums and Discussion

---

<div class="post-metadata">

### Author: ![canadianskyline](https://avatars.discourse-cdn.com/v4/letter/c/41988e/32.png) [@canadianskyline](https://forums.speedlife.net/u/canadianskyline)
#### Post date: [November 27, 2006, 10:06am UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/16 "2006-11-27T10:06:59Z")

</div>

I just noticed this thread, and yes, you can remove all of the hicas stuff with the motor in place. I did it, also, if you dont want to buy a new PS pump just take the back cover off the PS pump and remove the rear fins on it, then just put it back together and cap off the rear part of it where the line connects.

---

<div class="post-metadata">

### Author: ![\_Jacky](https://avatars.discourse-cdn.com/v4/letter/_/e9bcb4/32.png) [@\_Jacky](https://forums.speedlife.net/u/_Jacky)
#### Post date: [January 6, 2008, 6:04pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/17 "2008-01-06T18:04:48Z")

</div>

yes

---

<div class="post-metadata">

### Author: ![simpsonc](https://avatars.discourse-cdn.com/v4/letter/s/f0a364/32.png) [@simpsonc](https://forums.speedlife.net/u/simpsonc)
#### Post date: [January 14, 2008, 1:15am UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/18 "2008-01-14T01:15:26Z")

</div>

alright so i just bought a 240 and its got hicas on it. I was wondering is the hicas only on when the light on the interior is on? or is it on at all times?

---

<div class="post-metadata">

### Author: ![dnl61](https://avatars.discourse-cdn.com/v4/letter/d/13edae/32.png) [@dnl61](https://forums.speedlife.net/u/dnl61)
#### Post date: [January 17, 2008, 6:43pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/19 "2008-01-17T18:43:00Z")

</div>

the light means its not working.

---

<div class="post-metadata">

### Author: ![AnTi\_RiCeR](https://avatars.discourse-cdn.com/v4/letter/a/c68b51/32.png) [@AnTi\_RiCeR](https://forums.speedlife.net/u/AnTi_RiCeR)
#### Post date: [February 6, 2008, 8:29pm UTC](https://forums.speedlife.net/t/how-to-remove-hicas/140983/20 "2008-02-06T20:29:17Z")

</div>

If a guy wanted to auto cross with his car and not drift wouldn’t keeping the hicas Be a good idea? can someone with knowledge please shed some light on the pro’s and con’s of hicas!

[Next page](https://forums.speedlife.net/t/how-to-remove-hicas/140983.md?page=2)
