# HP Calc...

**URL:** <https://forums.speedlife.net/t/hp-calc/2061>\
**Category:** NYSpeed Automotive\
**Created:** [September 5, 2005, 11:38am UTC](https://forums.speedlife.net/t/hp-calc/2061 "2005-09-05T11:38:13Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![King](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/king/32/7329_2.png) [@King](https://forums.speedlife.net/u/King)\
**Post date:** [September 5, 2005, 11:38am UTC](https://forums.speedlife.net/t/hp-calc/2061/1 "2005-09-05T11:38:13Z")

</div>

this is probably not that accurate at all but id like to see some results…what you guys actually put down at the dyno vs. what this website says…  
[HP vrooooooooom](http://www.dsm.org/tools/calchp.htm)

---

<div class="post-metadata">

**Author:** ![evokidvii](https://avatars.discourse-cdn.com/v4/letter/e/958977/32.png) [@evokidvii](https://forums.speedlife.net/u/evokidvii)\
**Post date:** [September 5, 2005, 12:04pm UTC](https://forums.speedlife.net/t/hp-calc/2061/2 "2005-09-05T12:04:55Z")

</div>

using my trap speed of 98 it was dead on with 168, in my sol. with the e/t it said 139 at 15 seconds. not to bad

---

<div class="post-metadata">

**Author:** ![sureshot](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sureshot/32/7578_2.png) [@sureshot](https://forums.speedlife.net/u/sureshot)\
**Post date:** [September 5, 2005, 12:48pm UTC](https://forums.speedlife.net/t/hp-calc/2061/3 "2005-09-05T12:48:18Z")

</div>

stupid. doesnt accomodate for drivetrain type.

---

<div class="post-metadata">

**Author:** ![RedGoober4Life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redgoober4life/32/7610_2.png) [@RedGoober4Life](https://forums.speedlife.net/u/RedGoober4Life)\
**Post date:** [September 5, 2005, 1:07pm UTC](https://forums.speedlife.net/t/hp-calc/2061/4 "2005-09-05T13:07:47Z")

</div>

> [@sureshot!](#):
>
> stupid. doesnt accomodate for drivetrain type.

```
 	Using the ET method, I come up with <b>1.97645890625e+250</b> horsepower
Using the Speed method, I come up with <b> Inf</b> horsepower

```

---

<div class="post-metadata">

**Author:** ![King](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/king/32/7329_2.png) [@King](https://forums.speedlife.net/u/King)\
**Post date:** [September 5, 2005, 3:20pm UTC](https://forums.speedlife.net/t/hp-calc/2061/5 "2005-09-05T15:20:25Z")

</div>

dang thats a lot