# Hubs?

**URL:** https://forums.speedlife.net/t/hubs/93558
**Category:** SON240sx Automotive
**Created:** [March 8, 2006, 10:34am UTC](https://forums.speedlife.net/t/hubs/93558 "2006-03-08T10:34:04Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![SRS\_3](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@SRS\_3](https://forums.speedlife.net/u/SRS_3)
#### Post date: [March 8, 2006, 10:34am UTC](https://forums.speedlife.net/t/hubs/93558/1 "2006-03-08T10:34:04Z")

</div>

ok i know if i was to do a 5 lug conversion tat the S14 @40sx SE front hubs would work. does any one know if 300zx hubs would work. im pretty sure i just wanan know b4 i purchase them.

---

<div class="post-metadata">

### Author: ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)
#### Post date: [March 8, 2006, 10:35am UTC](https://forums.speedlife.net/t/hubs/93558/2 "2006-03-08T10:35:53Z")

</div>

Front (S13): S14 hub w/ spindle  
Front (S14): S14 hub only

Rear (S13/S14) S14 hub -or- 300zx N/A hub only (no spindle required)

---

<div class="post-metadata">

### Author: ![SRS\_3](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@SRS\_3](https://forums.speedlife.net/u/SRS_3)
#### Post date: [March 8, 2006, 11:02am UTC](https://forums.speedlife.net/t/hubs/93558/3 "2006-03-08T11:02:33Z")

</div>

so then it won’t work?

---

<div class="post-metadata">

### Author: ![KoukiS14](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/koukis14/32/5522_2.png) [@KoukiS14](https://forums.speedlife.net/u/KoukiS14)
#### Post date: [March 8, 2006, 12:08pm UTC](https://forums.speedlife.net/t/hubs/93558/4 "2006-03-08T12:08:53Z")

</div>

300zx hubs WONT work. Only rear 300ZX Non Turbo Hubs will work on the rear.

---

<div class="post-metadata">

### Author: ![SRS\_3](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@SRS\_3](https://forums.speedlife.net/u/SRS_3)
#### Post date: [March 8, 2006, 12:29pm UTC](https://forums.speedlife.net/t/hubs/93558/5 "2006-03-08T12:29:15Z")

</div>

all i needed to know

---

<div class="post-metadata">

### Author: ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [March 8, 2006, 1:41pm UTC](https://forums.speedlife.net/t/hubs/93558/6 "2006-03-08T13:41:25Z")

</div>

> [@Gonad](#):
>
> 300zx N/A hub only (no spindle required)

> [@KoukiS14](#):
>
> Only rear 300ZX Non Turbo Hubs will work on the rear.

Hate to break it to both of you but the Turbo Hubs DO WORK! their like a 1000th of an inch bigger but line up and fit perfectly…

Why would they fit perfect ? because the S13/S14/Z32 have the EXACT SAME SPINDLES!!! minus the differences in Strut Mounts. All use the SAME WHEEL BEARINGS as well. Only other Diff in a Z32 Spindle is an N/A is Steel and a TT is Alum “weight half as much”

Its funny how people “claim” they dont… Even his dude [The Definitive 300ZX Brake Swap - importnut.net](http://importnut.net/300zxbrakeswap.htm) has made it a point it list

> The Turbo hub is slightly differnt, but will work on either the S13, or S14