# hud cluster prob **URL:** \ **Category:** SON240sx Automotive\ **Created:** [February 24, 2009, 6:34pm UTC](https://forums.speedlife.net/t/hud-cluster-prob/122101 "2009-02-24T18:34:05Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![Tarz](https://avatars.discourse-cdn.com/v4/letter/t/43a26b/32.png) [@Tarz](https://forums.speedlife.net/u/Tarz)\ **Post date:** [February 24, 2009, 6:34pm UTC](https://forums.speedlife.net/t/hud-cluster-prob/122101/1 "2009-02-24T18:34:05Z")
i have a SOHC cluster and im puting in a SR will a normal DOHC cluster work? ---
**Author:** ![Hacknik](https://avatars.discourse-cdn.com/v4/letter/h/ba9def/32.png) [@Hacknik](https://forums.speedlife.net/u/Hacknik)\ **Post date:** [March 2, 2009, 1:58am UTC](https://forums.speedlife.net/t/hud-cluster-prob/122101/2 "2009-03-02T01:58:37Z")
yes ---
**Author:** ![Tarz](https://avatars.discourse-cdn.com/v4/letter/t/43a26b/32.png) [@Tarz](https://forums.speedlife.net/u/Tarz)\ **Post date:** [April 4, 2009, 1:16pm UTC](https://forums.speedlife.net/t/hud-cluster-prob/122101/3 "2009-04-04T13:16:42Z")
ok i just tryed pluging in my wiring harness and it didnt plug in underneith the dash is that becasuse it was a SOHC or b/c there is a sr now ---
**Author:** ![accelr8](https://avatars.discourse-cdn.com/v4/letter/a/e99b99/32.png) [@accelr8](https://forums.speedlife.net/u/accelr8)\ **Post date:** [April 4, 2009, 2:06pm UTC](https://forums.speedlife.net/t/hud-cluster-prob/122101/4 "2009-04-04T14:06:42Z")
i still have your HUD tarz .still want it? ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [April 4, 2009, 4:17pm UTC](https://forums.speedlife.net/t/hud-cluster-prob/122101/5 "2009-04-04T16:17:35Z")
doesnt matter if its a sohc or dohc…harness will be the same…only difference is that if you have a sohc cluster in a dohc car the rpms wont read unless you swap over the gauge ---
**Author:** ![Lummer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lummer/32/5493_2.png) [@Lummer](https://forums.speedlife.net/u/Lummer)\ **Post date:** [April 4, 2009, 7:26pm UTC](https://forums.speedlife.net/t/hud-cluster-prob/122101/6 "2009-04-04T19:26:45Z")
if ur swapping in an sr with complete harness u need to use the dash connector off the old KA harness to plug into the dash connector on usdm dash side. the sr dash connector and KA dash connector arent the same (the one thats a few inchs from the ecu) ---
**Author:** ![Tarz](https://avatars.discourse-cdn.com/v4/letter/t/43a26b/32.png) [@Tarz](https://forums.speedlife.net/u/Tarz)\ **Post date:** [April 5, 2009, 9:09am UTC](https://forums.speedlife.net/t/hud-cluster-prob/122101/7 "2009-04-05T09:09:37Z")
> [@OFFICIAL Buffalo Sabres Thread](https://forums.speedlife.net/t/official-buffalo-sabres-thread/25170/1748): > > i still have your HUD tarz .still want it? yea sorry i will grab that my word im just a bit strapped right now ---
**Author:** ![Tarz](https://avatars.discourse-cdn.com/v4/letter/t/43a26b/32.png) [@Tarz](https://forums.speedlife.net/u/Tarz)\ **Post date:** [April 6, 2009, 9:42am UTC](https://forums.speedlife.net/t/hud-cluster-prob/122101/8 "2009-04-06T09:42:40Z")
the wires just go colour to colour? right ---
**Author:** ![Lummer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lummer/32/5493_2.png) [@Lummer](https://forums.speedlife.net/u/Lummer)\ **Post date:** [April 6, 2009, 3:39pm UTC](https://forums.speedlife.net/t/hud-cluster-prob/122101/9 "2009-04-06T15:39:26Z")
pretty much heres a link i found that will help u out a lot > **[FRSport.com—Aftermarket Performance Parts](https://frsport.com/SR20DET-Swap-Engine-Harness-Wiring-Diagram-Guide-SR-SR20_t_26.html)** > > FRSport.com