# Hydraulic Shop **URL:** \ **Category:** SON240sx Automotive\ **Created:** [October 31, 2005, 1:29pm UTC](https://forums.speedlife.net/t/hydraulic-shop/89877 "2005-10-31T13:29:27Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Ed1](https://avatars.discourse-cdn.com/v4/letter/e/958977/32.png) [@Ed1](https://forums.speedlife.net/u/Ed1)\ **Post date:** [October 31, 2005, 1:29pm UTC](https://forums.speedlife.net/t/hydraulic-shop/89877/1 "2005-10-31T13:29:27Z")
anyone know’s one? in scarborough maybe? I broke an oil line for the turbo and I need someone to make one for me ty ed ---
**Author:** ![Ed1](https://avatars.discourse-cdn.com/v4/letter/e/958977/32.png) [@Ed1](https://forums.speedlife.net/u/Ed1)\ **Post date:** [November 1, 2005, 4:02pm UTC](https://forums.speedlife.net/t/hydraulic-shop/89877/2 "2005-11-01T16:02:14Z")
anyone? does anyone nkow where I can get someone to fab up an oil line to the turbo? ---
**Author:** ![slipperysilvia](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slipperysilvia/32/5485_2.png) [@slipperysilvia](https://forums.speedlife.net/u/slipperysilvia)\ **Post date:** [November 1, 2005, 4:03pm UTC](https://forums.speedlife.net/t/hydraulic-shop/89877/3 "2005-11-01T16:03:57Z")
return line or inlet line? ---
**Author:** ![Ed1](https://avatars.discourse-cdn.com/v4/letter/e/958977/32.png) [@Ed1](https://forums.speedlife.net/u/Ed1)\ **Post date:** [November 1, 2005, 4:56pm UTC](https://forums.speedlife.net/t/hydraulic-shop/89877/4 "2005-11-01T16:56:32Z")
it’s the inlet line. it was metal and the bolt to the engein was seized soo need another one ☹ the return line is rubber ---
**Author:** ![koz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/koz/32/5478_2.png) [@koz](https://forums.speedlife.net/u/koz)\ **Post date:** [November 2, 2005, 6:56am UTC](https://forums.speedlife.net/t/hydraulic-shop/89877/5 "2005-11-02T06:56:06Z")
invest in a stainless steel line… i can’t remember the size of the fitting on the turbo, but i know that the oil feed on the block is 12x1.25mm. do some research… there’s lots of info out there on this subject. Taka lines are a popular choice, but there are lots of options. i believe Sysco in Mississauga has made custom lines for people on this forum. ---
**Author:** ![ADAM](https://avatars.discourse-cdn.com/v4/letter/a/4af34b/32.png) [@ADAM](https://forums.speedlife.net/u/ADAM)\ **Post date:** [November 2, 2005, 7:41am UTC](https://forums.speedlife.net/t/hydraulic-shop/89877/6 "2005-11-02T07:41:25Z")
any aeroquip can make one up for you there is one in brampton ---
**Author:** ![Ed1](https://avatars.discourse-cdn.com/v4/letter/e/958977/32.png) [@Ed1](https://forums.speedlife.net/u/Ed1)\ **Post date:** [November 2, 2005, 10:58am UTC](https://forums.speedlife.net/t/hydraulic-shop/89877/7 "2005-11-02T10:58:49Z")
> [@koz](#): > > invest in a stainless steel line… i can’t remember the size of the fitting on the turbo, but i know that the oil feed on the block is 12x1.25mm. do some research… there’s lots of info out there on this subject. Taka lines are a popular choice, but there are lots of options. i believe Sysco in Mississauga has made custom lines for people on this forum. did some research, I bascially have al lthe part numbers for every peice bascially I need to find a place to do it btw… is the store called aeroequip? or is it a distributor? can you give me addy for store? ty ed ---
**Author:** ![Pavel](https://avatars.discourse-cdn.com/v4/letter/p/a4c791/32.png) [@Pavel](https://forums.speedlife.net/u/Pavel)\ **Post date:** [November 2, 2005, 9:59pm UTC](https://forums.speedlife.net/t/hydraulic-shop/89877/8 "2005-11-02T21:59:29Z")
There is a place in markham on steelcase road that can do it. They did my powersteering lines… I forget what it’s called though ☹ it’s west of woodbine down steelcase before john on the west side