# I need to dyno my S2K...help **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [November 15, 2007, 11:13am UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807 "2007-11-15T11:13:59Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\ **Post date:** [November 15, 2007, 11:13am UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/1 "2007-11-15T11:13:59Z")
Hey guys. I have some plans for the winter. Before the S goes into hibernation id like to get it dynoed and then redynoed with new parts come spring. I didnt do this for my GSRT and got riced on:smash2:. Wheres a good place to go. Ive been to splinas(sp) anywhere else? thx ---
**Author:** ![slacker127](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slacker127/32/7378_2.png) [@slacker127](https://forums.speedlife.net/u/slacker127)\ **Post date:** [November 15, 2007, 11:39am UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/2 "2007-11-15T11:39:51Z")
[http://www.evans-tuning.com/about.html](http://www.evans-tuning.com/about.html) ---
**Author:** ![Toda\_Party](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/toda_party/32/7354_2.png) [@Toda\_Party](https://forums.speedlife.net/u/Toda_Party)\ **Post date:** [November 15, 2007, 11:47am UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/3 "2007-11-15T11:47:05Z")
evans tuning to get baseline numbers? get outta here just go to spina’s again. ---
**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\ **Post date:** [November 15, 2007, 11:55am UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/4 "2007-11-15T11:55:32Z")
He was cool but I didnt like coming down off his lift…kinda backed me out wrong and the front scraped pulling plastic =( if need be ill go there again. Also-his printer was all messed…but i think he had good prices :tup: ---
**Author:** ![slacker127](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slacker127/32/7378_2.png) [@slacker127](https://forums.speedlife.net/u/slacker127)\ **Post date:** [November 15, 2007, 12:12pm UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/5 "2007-11-15T12:12:25Z")
[quote=“Toda Party,post:3,topic:38807"”] evans tuning to get baseline numbers? get outta here just go to spina’s again. [/quote] true true but Evans is the man ---
**Author:** ![brent\_strong](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/brent_strong/32/7203_2.png) [@brent\_strong](https://forums.speedlife.net/u/brent_strong)\ **Post date:** [November 15, 2007, 1:03pm UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/6 "2007-11-15T13:03:06Z")
New Era Performance in Rochester would do it, I’m sure. They put SLAMMED track-only 'vettes up there with no issue, so the S should be easy. ---
**Author:** ![Rx3](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rx3/32/7194_2.png) [@Rx3](https://forums.speedlife.net/u/Rx3)\ **Post date:** [November 15, 2007, 1:04pm UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/7 "2007-11-15T13:04:24Z")
[quote=“brent\_strong,post:6,topic:38807"”] New Era Performance in Rochester would do it, I’m sure. They put SLAMMED track-only 'vettes up there with no issue, so the S should be easy. [/quote] :word: ---
**Author:** ![MPD47](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mpd47/32/7383_2.png) [@MPD47](https://forums.speedlife.net/u/MPD47)\ **Post date:** [November 15, 2007, 1:15pm UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/8 "2007-11-15T13:15:05Z")
[quote=“brent\_strong,post:6,topic:38807"”] New Era Performance in Rochester would do it, I’m sure. They put SLAMMED track-only 'vettes up there with no issue, so the S should be easy. [/quote] +1 I had the porsche on their lift and they were very very careful using extra wood etc to get it on. The guys at New Era are top notch. ---
**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\ **Post date:** [November 15, 2007, 1:16pm UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/9 "2007-11-15T13:16:28Z")
$? ---
**Author:** ![brent\_strong](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/brent_strong/32/7203_2.png) [@brent\_strong](https://forums.speedlife.net/u/brent_strong)\ **Post date:** [November 15, 2007, 1:25pm UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/10 "2007-11-15T13:25:07Z")
From their site: > If you would like to rent out the dyno it is $100 per hour or for 3 pulls(done in one hour or less). ---
**Author:** ![walter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/walter/32/7202_2.png) [@walter](https://forums.speedlife.net/u/walter)\ **Post date:** [November 15, 2007, 1:27pm UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/11 "2007-11-15T13:27:59Z")
Get it dynoed wherever you plan to dyno it after the work (or where you plan to tune it). ---
**Author:** ![Rx3](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rx3/32/7194_2.png) [@Rx3](https://forums.speedlife.net/u/Rx3)\ **Post date:** [November 15, 2007, 1:42pm UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/12 "2007-11-15T13:42:19Z")
[quote=“walter,post:11,topic:38807"”] Get it dynoed wherever you plan to dyno it after the work (or where you plan to tune it). [/quote] Good advice, you want the same variables when testing. ---
**Author:** ![mike72678](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mike72678/32/7506_2.png) [@mike72678](https://forums.speedlife.net/u/mike72678)\ **Post date:** [November 19, 2007, 9:33pm UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/13 "2007-11-19T21:33:36Z")
We’d be happy to work with whoever your tuner is for tuning on our dyno as we have with many other import tuners in the area , it does help to use the same dyno if you are looking for comparison numbers . Mike ---
**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\ **Post date:** [November 20, 2007, 7:31am UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/14 "2007-11-20T07:31:18Z")
well, it being stock right now i dont have/need a tuner…just a dyno ---
**Author:** ![Toda\_Party](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/toda_party/32/7354_2.png) [@Toda\_Party](https://forums.speedlife.net/u/Toda_Party)\ **Post date:** [November 20, 2007, 7:39am UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/15 "2007-11-20T07:39:13Z")
[quote=“walter,post:11,topic:38807"”] Get it dynoed wherever you plan to dyno it after the work (or where you plan to tune it). [/quote] he’s been told this many times already haha ---
**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\ **Post date:** [November 20, 2007, 10:04am UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/16 "2007-11-20T10:04:05Z")
new era, mcquillens, spinas, evans ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [November 20, 2007, 1:49pm UTC](https://forums.speedlife.net/t/i-need-to-dyno-my-s2k-help/38807/17 "2007-11-20T13:49:37Z")
+1 newera for not scraping. We have a lot of 2x10s 2,4,6 ft long just for the low cars, and front lips. like these beasts [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png)