# I think someone forgot some \*Loctite\* **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [June 29, 2009, 10:12am UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827 "2009-06-29T10:12:57Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\ **Post date:** [June 29, 2009, 10:12am UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/1 "2009-06-29T10:12:57Z")
Looking over this CRX that I just bought, I found a near fatal flaw in it’s construction. Looks like someone forgot the bolts going to the back housing haha. ![http://img.photobucket.com/albums/v607/alexsobo/20090629123337-1.jpg](http://img.photobucket.com/albums/v607/alexsobo/20090629123337-1.jpg) [![http://img.photobucket.com/albums/v607/alexsobo/th_video-2009-06-29-12-32-32.jpg](http://img.photobucket.com/albums/v607/alexsobo/th_video-2009-06-29-12-32-32.jpg)](http://smg.photobucket.com/albums/v607/alexsobo/?action=view¤t=video-2009-06-29-12-32-32.flv) No harm done(At least I hope so!), but just another reason to look over your car when works done to it. I’m sure it wasn’t intentional. Any idea where I can get the 4 bolts? ---
**Author:** ![Joe](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/joe/32/7219_2.png) [@Joe](https://forums.speedlife.net/u/Joe)\ **Post date:** [June 29, 2009, 10:16am UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/2 "2009-06-29T10:16:36Z")
Suburban Auto Electric’s old shop probably has some extra bolts lying around :lol: ---
**Author:** ![BDR5oh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bdr5oh/32/7315_2.png) [@BDR5oh](https://forums.speedlife.net/u/BDR5oh)\ **Post date:** [June 29, 2009, 10:26am UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/3 "2009-06-29T10:26:46Z")
. ---
**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\ **Post date:** [June 29, 2009, 10:47am UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/4 "2009-06-29T10:47:30Z")
> [@Joe](#): > > Suburban Auto Electric’s old shop probably has some extra bolts lying around :lol: Don’t get it? I think the bolts may be at wherever it was built haha 🤓 ---
**Author:** ![Zer0DazE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zer0daze/32/7624_2.png) [@Zer0DazE](https://forums.speedlife.net/u/Zer0DazE)\ **Post date:** [June 29, 2009, 10:49am UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/5 "2009-06-29T10:49:29Z")
it was probably JB Welded on ---
**Author:** ![justa4door](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justa4door/32/7259_2.png) [@justa4door](https://forums.speedlife.net/u/justa4door)\ **Post date:** [June 29, 2009, 10:54am UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/6 "2009-06-29T10:54:30Z")
> [@sobo](#): > > Don’t get it? > > I think the bolts may be at wherever it was built haha 🤓 this is b/c when they work on cars they have a bag of bolts left over ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [June 29, 2009, 10:59am UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/7 "2009-06-29T10:59:57Z")
northstate supply on military has TONS of hardware. What kind of turbo is that? If it’s a garret I think they use SAE hdwr. ---
**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\ **Post date:** [June 29, 2009, 11:12am UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/8 "2009-06-29T11:12:23Z")
Its a garrett gt30r water cooled turbo. Thanks for the help so far guys! ---
**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\ **Post date:** [June 29, 2009, 11:49am UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/9 "2009-06-29T11:49:12Z")
> [@Zer0DazE](#): > > it was probably JB Welded on You think innovative would have done that? Lol ---
**Author:** ![BadnewsMike](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/badnewsmike/32/7419_2.png) [@BadnewsMike](https://forums.speedlife.net/u/BadnewsMike)\ **Post date:** [June 29, 2009, 11:51am UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/10 "2009-06-29T11:51:37Z")
did you get rid of the S4? and i doubt it is JB welded lol… ---
**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\ **Post date:** [June 29, 2009, 11:54am UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/11 "2009-06-29T11:54:15Z")
umm im gunna have to say no to innovate doing that but you may wanna look into them possibly being snapped. if charge piping was to bottom out on the street or something its could very easily snap bolts. somethings gotta give. hopefully they were just loose and backed themselves out till they fell out. ---
**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\ **Post date:** [June 29, 2009, 12:54pm UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/12 "2009-06-29T12:54:44Z")
> [@turbociv](#): > > umm im gunna have to say no to innovate doing that but you may wanna look into them possibly being snapped. if charge piping was to bottom out on the street or something its could very easily snap bolts. somethings gotta give. hopefully they were just loose and backed themselves out till they fell out. They aren’t snapped there is nothing there at all. Also, the charge piping couldn’t grab the ground. There is a racing cross member deal pretty much guarding it. Backing out is a possibility. Would anyone wanna lend me a bolt from this particular area so that way I could match something up? ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [June 29, 2009, 1:02pm UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/13 "2009-06-29T13:02:29Z")
i have a 35r you can grab a bolt from as long as you make sure i get it back, Or i can just check the thread pitch and size and holla back. ---
**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\ **Post date:** [June 29, 2009, 1:07pm UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/14 "2009-06-29T13:07:23Z")
You think there would be any chance of matching it on mcmaster carr? If we could do that, that would be sick. If not I would really love being able to pick up that bolt just to match it up at northstate supply. Whatever is easiest for you, and I’d be forever grateful! -Sobo ---
**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\ **Post date:** [June 29, 2009, 1:42pm UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/15 "2009-06-29T13:42:57Z")
UPDATE: Looks like someone forgot the locktite actually. Upon further inspection, i noticed a few other bolts were backing out, and one on the downpipe too. ---
**Author:** ![Joe](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/joe/32/7219_2.png) [@Joe](https://forums.speedlife.net/u/Joe)\ **Post date:** [June 29, 2009, 1:44pm UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/16 "2009-06-29T13:44:55Z")
sorry bout that, WHAMMY ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [June 29, 2009, 1:46pm UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/17 "2009-06-29T13:46:03Z")
na heat breaks down the locktight bond. fyi that’s why you need a mechanical holding fastener for that app. ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [June 29, 2009, 1:49pm UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/18 "2009-06-29T13:49:50Z")
yeah. you don’t want loctite. A good lock washer would go a long way there… even a shitty split-loc ---
**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\ **Post date:** [June 29, 2009, 1:51pm UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/19 "2009-06-29T13:51:41Z")
That is a pte built turbo and could be the problem right there. This is a 30r compressor cover… ![http://siadam.com/Pictures/turbo/1.jpg](http://siadam.com/Pictures/turbo/1.jpg) Your’s is more like this style… ![http://www.slowboyracing.com/images/W/PTE%20SC34.jpg](http://www.slowboyracing.com/images/W/PTE%20SC34.jpg) It will be either 8mm x 1.25 thread pitch or sae. This is a PTE qc problem not Innovative. You should never have to touch those bolts they should have been locktited when the turbo was built before balancing. Loctite will be fine on the compressor side of the turbo and most times you are better off with a proper flange head bolt than normal hex with split washer. You will get more holding power and the spring tension of the split washer desipates with time as well as the washer being split has the ability to move out from under the bolt and break the torque. In a high heat vibration app you want flange head bolts and nuts and next step is a tapered washer last step is saftey wire. ---
**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\ **Post date:** [June 29, 2009, 2:37pm UTC](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827/20 "2009-06-29T14:37:40Z")
Hey thanks a lot man. Yeah I’m not trying to point fingers, its no harm done so no big deal. Thanks for the information! [Next page](https://forums.speedlife.net/t/i-think-someone-forgot-some-loctite/69827.md?page=2)