# IAC relocation kit for civic

**URL:** <https://forums.speedlife.net/t/iac-relocation-kit-for-civic/9816>\
**Category:** NYSpeed Automotive\
**Created:** [March 25, 2006, 7:29am UTC](https://forums.speedlife.net/t/iac-relocation-kit-for-civic/9816 "2006-03-25T07:29:42Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kattatonik916](https://avatars.discourse-cdn.com/v4/letter/k/dc4da7/32.png) [@Kattatonik916](https://forums.speedlife.net/u/Kattatonik916)\
**Post date:** [March 25, 2006, 7:29am UTC](https://forums.speedlife.net/t/iac-relocation-kit-for-civic/9816/1 "2006-03-25T07:29:42Z")

</div>

I just did a z6 head swap on a b7 block. While doing the swap i decided to go and put a Skunk2 intake manifold on. Well since the runners are longer the IAC valve hits a brake line splitter on the fire wall. I was told there is a relocator for just this type of situation. I cant find anything on it. Maybe with a few collective minds i can find it. Thanx guys

---

<div class="post-metadata">

**Author:** ![Carnut](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carnut/32/7590_2.png) [@Carnut](https://forums.speedlife.net/u/Carnut)\
**Post date:** [March 25, 2006, 7:31am UTC](https://forums.speedlife.net/t/iac-relocation-kit-for-civic/9816/2 "2006-03-25T07:31:31Z")

</div>

I have seen it once, it is basiclaly a plate with barb fittings for vacuum lines. However you need to run coolant to it also whereever you put it.