# IC/FT: AME FIN's. 18x10, 18x8.5. WTT for Low Key Wheels! **URL:** \ **Category:** Classifieds\ **Created:** [October 28, 2009, 9:09am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164 "2009-10-28T09:09:30Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![ronnie416](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ronnie416/32/5480_2.png) [@ronnie416](https://forums.speedlife.net/u/ronnie416)\ **Post date:** [October 28, 2009, 9:09am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/1 "2009-10-28T09:09:30Z")
**NO PM’s!!!** CALL TEXT, POSTUP OR EMAIL ME! [ronniefung@gmail.com](mailto:ronniefung@gmail.com) 416.846.6754. AME Fins. AME is made by Enkei which make many wheels. Works included I believe. they seem to be identical to VSXX’s. Same **three piece wheel** but with different centre cap. I can’t really tell the two apart and they weigh the same. **18x10 +36** (5mm Slip Spacers) 265\35-18 Nexen 3000 with 80%. **18x8.5 +35** (May include 15mm Bolt On Spacers for the right deal) 225\40-17 with Yokohama DNA’s with 40%… Wheels are in VERY good condition with some slight curb rash on the front left wheel. SLIGHT. No bends, no leaks, balanced last night with barely any weights. I’m looking to TRADE for something more low key. Would love me a set of some Weapons or Waynes Volk CV Pro’s. I would really really love some XD9’s or CR Kai’s, or even better, LMGT’s of any kind!!! I love the P45R Rota look…,…whatever those one are. hahahha. I am also looking for GTR wheels. No GTST Wheels. GEE TEE AREEEE only. I want 17’s and I’m looking for more of an open wheel as you can tell. The older get, the less flashy I want. I prefer dark wheels. So BLACK would be optimal. Must be at least 8 inches wide and preference will be give for staggered setups. Looking to do even trade or you add cash. I can’t add. I’m effin broke for real. **Cash Price of 1200obo with spacers.** **NO PM’s!!!** CALL TEXT, POSTUP OR EMAIL ME! [ronniefung@gmail.com](mailto:ronniefung@gmail.com) 416.846.6754. ![http://i10.photobucket.com/albums/a112/ronnietrackpics/IMG_5212.jpg](http://i10.photobucket.com/albums/a112/ronnietrackpics/IMG_5212.jpg) ![http://i10.photobucket.com/albums/a112/ronnietrackpics/IMG_5219.jpg](http://i10.photobucket.com/albums/a112/ronnietrackpics/IMG_5219.jpg) ![http://i10.photobucket.com/albums/a112/ronnietrackpics/IMG_5222.jpg](http://i10.photobucket.com/albums/a112/ronnietrackpics/IMG_5222.jpg) ![http://i10.photobucket.com/albums/a112/ronnietrackpics/IMG_5223.jpg](http://i10.photobucket.com/albums/a112/ronnietrackpics/IMG_5223.jpg) ![http://i10.photobucket.com/albums/a112/ronnietrackpics/IMG_5216.jpg](http://i10.photobucket.com/albums/a112/ronnietrackpics/IMG_5216.jpg) ![http://i10.photobucket.com/albums/a112/ronnietrackpics/IMG_5225.jpg](http://i10.photobucket.com/albums/a112/ronnietrackpics/IMG_5225.jpg) ---
**Author:** ![ronnie416](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ronnie416/32/5480_2.png) [@ronnie416](https://forums.speedlife.net/u/ronnie416)\ **Post date:** [October 28, 2009, 9:10am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/2 "2009-10-28T09:10:13Z")
Oh yeah, tires were JUST mounted and balanced last night along with the BOLTON spacers. 🙂 ---
**Author:** ![tatti](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tatti/32/5742_2.png) [@tatti](https://forums.speedlife.net/u/tatti)\ **Post date:** [October 28, 2009, 9:35am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/3 "2009-10-28T09:35:12Z")
You want your impuls back? Lol ---
**Author:** ![CSK-240-R1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/csk-240-r1/32/5698_2.png) [@CSK-240-R1](https://forums.speedlife.net/u/CSK-240-R1)\ **Post date:** [October 28, 2009, 10:32am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/4 "2009-10-28T10:32:47Z")
black battle? ---
**Author:** ![ronnie416](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ronnie416/32/5480_2.png) [@ronnie416](https://forums.speedlife.net/u/ronnie416)\ **Post date:** [October 28, 2009, 10:58am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/5 "2009-10-28T10:58:22Z")
Tatti: if they sell, I’d be interested. Brad: possibly. Would prefer a lip style wheel though but maybe. ---
**Author:** ![Multisynclg](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/multisynclg/32/5328_2.png) [@Multisynclg](https://forums.speedlife.net/u/Multisynclg)\ **Post date:** [October 28, 2009, 11:22am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/6 "2009-10-28T11:22:09Z")
I got some GTR r32’s with potenza re01r’s, any other rims you got your willing to trade? ---
**Author:** ![ronnie416](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ronnie416/32/5480_2.png) [@ronnie416](https://forums.speedlife.net/u/ronnie416)\ **Post date:** [October 28, 2009, 11:32am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/7 "2009-10-28T11:32:33Z")
No, sorry. Only have GTST wheels. ---
**Author:** ![CSK-240-R1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/csk-240-r1/32/5698_2.png) [@CSK-240-R1](https://forums.speedlife.net/u/CSK-240-R1)\ **Post date:** [October 28, 2009, 3:03pm UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/8 "2009-10-28T15:03:10Z")
im so dissapointed i sold my work vs xx … let me know if u want to trade ---
**Author:** ![ronnie416](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ronnie416/32/5480_2.png) [@ronnie416](https://forums.speedlife.net/u/ronnie416)\ **Post date:** [October 28, 2009, 3:05pm UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/9 "2009-10-28T15:05:48Z")
18 inches of pure baller. Lemme know what you have in mind and I’ll think about it mang. ---
**Author:** ![CSK-240-R1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/csk-240-r1/32/5698_2.png) [@CSK-240-R1](https://forums.speedlife.net/u/CSK-240-R1)\ **Post date:** [October 28, 2009, 3:09pm UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/10 "2009-10-28T15:09:43Z")
cost me about a g for mb’s all said and done, so i will add 2 bills to make the difference, bfg g-force t/a wwith deep tread on back, 2 mis matched on the front ---
**Author:** ![ronnie416](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ronnie416/32/5480_2.png) [@ronnie416](https://forums.speedlife.net/u/ronnie416)\ **Post date:** [October 29, 2009, 7:23am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/11 "2009-10-29T07:23:40Z")
PS: you will NOT need to run a spacer in the rear of a stock body S13 for these rears. They will sit flush, and perfectly flush and you will need a roll. Only reason they don’t sit like that on my car is because I have about a 2 inch cut and pull in the rear. Rears are 10" rear with a 265 so be forewarned that you will need a roll for sure. Fronts require a 5-7mm spacer to clear 30mm Z brakes. Either that, or you run a 3mm and shave the NISSAN logo off the brakes. I’m not really interested in 7" wheels with a very high offset dudes, so please. 8" or wider only when offering a trade as you’ll only be wasting your time otherwise. $1050 with no spacers. $1200 with spacers. Will take partial trade towards: SSQV BOV, larger T3 turbos, test pipe, front K’s silvia Bumper, Silvia Valances (I’m an idiot and sold both sets of mine), and also of course, 8" or wider 5x114.3 wheels. GTR wheels are priority. ---
**Author:** ![stealth240](https://avatars.discourse-cdn.com/v4/letter/s/b782af/32.png) [@stealth240](https://forums.speedlife.net/u/stealth240)\ **Post date:** [October 30, 2009, 8:07am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/12 "2009-10-30T08:07:35Z")
These still for sale? ---
**Author:** ![ronnie416](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ronnie416/32/5480_2.png) [@ronnie416](https://forums.speedlife.net/u/ronnie416)\ **Post date:** [October 30, 2009, 2:29pm UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/13 "2009-10-30T14:29:38Z")
> [@FS: e46 bmw projectors](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/24): > > These still for sale? Yes, they are. Pending several offers. Can’t make up my mind. ---
**Author:** ![ronnie416](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ronnie416/32/5480_2.png) [@ronnie416](https://forums.speedlife.net/u/ronnie416)\ **Post date:** [November 5, 2009, 9:55am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/14 "2009-11-05T09:55:24Z")
Selling now. No longer wish to trade unless you have exactly what I am looking for. Which are GTR wheels or Volk CV2’s. Text me or call me or email me. \*\*\*\*PLEASE do not contact me unless you are serious and have cash in hand. It would just be a waste of time for you and me. ---
**Author:** ![ronnie416](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ronnie416/32/5480_2.png) [@ronnie416](https://forums.speedlife.net/u/ronnie416)\ **Post date:** [November 7, 2009, 3:25pm UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/15 "2009-11-07T15:25:19Z")
Okay, another buyer flaked on me. I’m gonna start neg reppin real fast. hahahha. Pls don’t make me hold something for you without an EMT deposit. I keep falling for it and keep losing out because of it. $975 no spacers. ---
**Author:** ![ronnie416](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ronnie416/32/5480_2.png) [@ronnie416](https://forums.speedlife.net/u/ronnie416)\ **Post date:** [November 9, 2009, 10:55am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/16 "2009-11-09T10:55:45Z")
Need to buy my new set of wheels soon! Price drop to $950. Will include TWO 5 bolt slip on spacers. Can use stock studs with no problem. ---
**Author:** ![ronnie416](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ronnie416/32/5480_2.png) [@ronnie416](https://forums.speedlife.net/u/ronnie416)\ **Post date:** [November 13, 2009, 4:45pm UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/17 "2009-11-13T16:45:27Z")
900 Firm. What i paid with no tires. ---
**Author:** ![ronnie416](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ronnie416/32/5480_2.png) [@ronnie416](https://forums.speedlife.net/u/ronnie416)\ **Post date:** [November 17, 2009, 9:12am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/18 "2009-11-17T09:12:37Z")
Okay, need these gone, $800. Rob me. ---
**Author:** ![Sizzlenut](https://avatars.discourse-cdn.com/v4/letter/s/9de053/32.png) [@Sizzlenut](https://forums.speedlife.net/u/Sizzlenut)\ **Post date:** [November 17, 2009, 9:35am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/19 "2009-11-17T09:35:25Z")
Sorry I PMed you. How much do they weigh? ---
**Author:** ![Sizzlenut](https://avatars.discourse-cdn.com/v4/letter/s/9de053/32.png) [@Sizzlenut](https://forums.speedlife.net/u/Sizzlenut)\ **Post date:** [November 17, 2009, 10:03am UTC](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164/20 "2009-11-17T10:03:03Z")
Front tire size doesn’t jive. Is it a 225/35/18 on there? [Next page](https://forums.speedlife.net/t/ic-ft-ame-fins-18x10-18x8-5-wtt-for-low-key-wheels/129164.md?page=2)