# IC: Full HKS Turbo Kit FT **URL:** \ **Category:** Classifieds\ **Created:** [June 28, 2011, 2:26pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982 "2011-06-28T14:26:34Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![danbikes](https://avatars.discourse-cdn.com/v4/letter/d/f9ae1b/32.png) [@danbikes](https://forums.speedlife.net/u/danbikes)\ **Post date:** [June 28, 2011, 2:26pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/1 "2011-06-28T14:26:34Z")
Thought I’d throw this up here to see what kind of offers I’d get. As title states, I have a full HKS Turbo kit, including an HKS Exhaust Manifold, an HKS GT-SS Turbo, and an HKS 3" Turbo Elbow. All parts are 100% legit HKS, no knock off shit. I ended up getting this turbo setup with my new motor set. With my current tune, I’m making just shy of 320 whp, and just shy of 300 ft./lbs. of torque @ 17 psi. I have a 100% stock head, and a fully built bottom end on my S13 SR. The numbers might not look all that impressive, but to show you the real magic of this turbo, you gotta look at my dyno sheet: [![](http://www.dynamotorsports.ca/dynographs2/HaltechS13HKSGTSSDyno.jpg) ](http://www.dynamotorsports.ca/dynographs2/HaltechS13HKSGTSSDyno.jpg) I got it tuned at DMT by Tony. He was amazed that it was able to make full boost by about 3200 rpm (this isn’t shown on the dyno sheet because he went WOT at a later RPM, but if you were to punch it from say, 2k rpm, you would hit full boost around 3200-3400 rpm) This is the ideal Circuit/Street/Drift setup. Tons of low end grunt, and a Torque curve that looks like a table top. Of course there is a downside. It’s basically maxing out at those numbers. Hence why I’m looking to trade for something a bit bigger, and willing to sacrifice the amazing response of this turbo. This whole kit only has 37k on it, I got it new when I got my new engine, which was exactly 37k ago. Needless to say, its in fantastic condition, besides the slight amount of surface rust on the exhaust components (I had to winter drive this car last winter due to certain unfortunate circumstances). * * * * * * EDIT: I ended up picking up the turbo I wanted. This kit is now for sale. I will not let this go for anything less than $1300. For that price, you get: The Turbo, Manifold, Turbo Elbow, and Turbo Lines (if needed). Willing to sell parts separately as long as it goes all at once. Whoever wants the Turbo, find someone to buy the elbow/manifold at the same time etc. Prices are as follows: Turbo: $620 Manifold: $600 Elbow: $180 Turbo Lines: $50 If you buy multiple parts at once, I will give a discount. ## All hardware that is even slightly damaged/rusted will be re-threaded/replaced, so you will be getting everything minty fresh. * * * The manifold alone is over $1000 new +tax +shipping etc. etc., if you can find one. Just to put things in perspective. [http://www.240sxmotoring.com/hksststsrma.html](http://www.240sxmotoring.com/hksststsrma.html) Test Drives are available for people that want to see how this Turbo performs. There are a few members on here that I’ve taken for a ride, they can vouch for this Turbo’s awesomeness. Pics: ![http://img696.imageshack.us/img696/9756/20110628164702.jpg](http://img696.imageshack.us/img696/9756/20110628164702.jpg) ![http://img820.imageshack.us/img820/7674/20110628164359.jpg](http://img820.imageshack.us/img820/7674/20110628164359.jpg) ![http://img59.imageshack.us/img59/733/20110628164249.jpg](http://img59.imageshack.us/img59/733/20110628164249.jpg) ![http://img30.imageshack.us/img30/8804/20110628164217.jpg](http://img30.imageshack.us/img30/8804/20110628164217.jpg) ![http://img695.imageshack.us/img695/416/20110628164149.jpg](http://img695.imageshack.us/img695/416/20110628164149.jpg) ---
**Author:** ![braden](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/braden/32/5757_2.png) [@braden](https://forums.speedlife.net/u/braden)\ **Post date:** [June 28, 2011, 4:11pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/2 "2011-06-28T16:11:04Z")
good guy to deal with, glws dan ---
**Author:** ![danbikes](https://avatars.discourse-cdn.com/v4/letter/d/f9ae1b/32.png) [@danbikes](https://forums.speedlife.net/u/danbikes)\ **Post date:** [June 28, 2011, 5:14pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/3 "2011-06-28T17:14:47Z")
> [@braden](#): > > good guy to deal with, glws dan Thanks 🙂 ---
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [June 28, 2011, 5:32pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/4 "2011-06-28T17:32:48Z")
dent the elbow! i had to to mine so it didnt rub! nice setup ---
**Author:** ![danbikes](https://avatars.discourse-cdn.com/v4/letter/d/f9ae1b/32.png) [@danbikes](https://forums.speedlife.net/u/danbikes)\ **Post date:** [June 28, 2011, 5:51pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/5 "2011-06-28T17:51:01Z")
Yea it’s not rubbing anymore 😛 I fixed that a couple months ago, and thanks. Will be out at KC meet tonight, and at the Richmond Hill meet on Friday. For those seriously interested, I can take people on test drives. ---
**Author:** ![\_kris](https://avatars.discourse-cdn.com/v4/letter/_/858c86/32.png) [@\_kris](https://forums.speedlife.net/u/_kris)\ **Post date:** [June 28, 2011, 6:00pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/6 "2011-06-28T18:00:01Z")
vouch x100000 ---
**Author:** ![prozac3ne2nr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/prozac3ne2nr/32/5581_2.png) [@prozac3ne2nr](https://forums.speedlife.net/u/prozac3ne2nr)\ **Post date:** [June 28, 2011, 6:41pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/7 "2011-06-28T18:41:31Z")
looks familiar, was this the engine from EagleJapan? Had quite a bit of toys on it. Either way good setup like you said. ---
**Author:** ![danbikes](https://avatars.discourse-cdn.com/v4/letter/d/f9ae1b/32.png) [@danbikes](https://forums.speedlife.net/u/danbikes)\ **Post date:** [June 28, 2011, 10:02pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/8 "2011-06-28T22:02:06Z")
Nope, every part of this engine almost, was bought separately, and then rebuilt with a ton of high end aftermarket parts. It’s basically a brand new engine. Needless to say i spent more than a pretty penny, but in the end its worth it cause i know its solid and don’t have to worry about it. ---
**Author:** ![prozac3ne2nr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/prozac3ne2nr/32/5581_2.png) [@prozac3ne2nr](https://forums.speedlife.net/u/prozac3ne2nr)\ **Post date:** [June 29, 2011, 4:44am UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/9 "2011-06-29T04:44:44Z")
wicked! ---
**Author:** ![jdm-only](https://avatars.discourse-cdn.com/v4/letter/j/ea666f/32.png) [@jdm-only](https://forums.speedlife.net/u/jdm-only)\ **Post date:** [June 29, 2011, 6:44pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/10 "2011-06-29T18:44:16Z")
will you trade for a gt35r top mount set up? ---
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [June 29, 2011, 6:49pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/11 "2011-06-29T18:49:00Z")
> [@prozac3ne2nr](#): > > wicked! Thats the one I bought, I guess you didnt believe me lol. ---
**Author:** ![danbikes](https://avatars.discourse-cdn.com/v4/letter/d/f9ae1b/32.png) [@danbikes](https://forums.speedlife.net/u/danbikes)\ **Post date:** [June 29, 2011, 7:09pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/12 "2011-06-29T19:09:17Z")
> [@jdm-only](#): > > will you trade for a gt35r top mount set up? pm me details. ---
**Author:** ![C.G.Tuning](https://avatars.discourse-cdn.com/v4/letter/c/ecae2f/32.png) [@C.G.Tuning](https://forums.speedlife.net/u/C.G.Tuning)\ **Post date:** [June 30, 2011, 1:53pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/13 "2011-06-30T13:53:31Z")
price? ---
**Author:** ![RED\_LINE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/red_line/32/5656_2.png) [@RED\_LINE](https://forums.speedlife.net/u/RED_LINE)\ **Post date:** [June 30, 2011, 5:25pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/14 "2011-06-30T17:25:09Z")
> [@danbikes](#): > > Yea it’s not rubbing anymore 😛 I fixed that a couple months ago, and thanks. > > Will be out at KC meet tonight, and at the Richmond Hill meet on Friday. For those seriously interested, I can take people on test drives. You know Dan, I’ve felt how your car pulled w/ the t28…but… this monster, I gotta see this before it goes to a new home!! 😮 ---
**Author:** ![prozac3ne2nr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/prozac3ne2nr/32/5581_2.png) [@prozac3ne2nr](https://forums.speedlife.net/u/prozac3ne2nr)\ **Post date:** [June 30, 2011, 7:14pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/15 "2011-06-30T19:14:19Z")
I beleived you D, thought you resold it dude. ---
**Author:** ![danbikes](https://avatars.discourse-cdn.com/v4/letter/d/f9ae1b/32.png) [@danbikes](https://forums.speedlife.net/u/danbikes)\ **Post date:** [July 1, 2011, 10:13am UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/16 "2011-07-01T10:13:15Z")
Alright, I ended up picking up the turbo I wanted. This kit will be for sale shortly. Willing to trade for a well built T3 flange manifold with wastegate, and 3" V-Band downpipe, plus cash depending on the parts. ---
**Author:** ![74Celica](https://avatars.discourse-cdn.com/v4/letter/7/dfb087/32.png) [@74Celica](https://forums.speedlife.net/u/74Celica)\ **Post date:** [July 3, 2011, 7:55pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/17 "2011-07-03T19:55:48Z")
qjust curiosity here, but would that turbo be similar to an HKS2530 or smaller? sorry for the hijack/ ---
**Author:** ![danbikes](https://avatars.discourse-cdn.com/v4/letter/d/f9ae1b/32.png) [@danbikes](https://forums.speedlife.net/u/danbikes)\ **Post date:** [July 3, 2011, 9:42pm UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/18 "2011-07-03T21:42:39Z")
It’s a gt2560 modified by hks to give better torque/power curves and improve durability. ---
**Author:** ![prozac3ne2nr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/prozac3ne2nr/32/5581_2.png) [@prozac3ne2nr](https://forums.speedlife.net/u/prozac3ne2nr)\ **Post date:** [July 4, 2011, 5:36am UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/19 "2011-07-04T05:36:57Z")
if, if you have a manifold only buyer and can figure a price on the turbine itself, let me know? Thanks. ---
**Author:** ![danbikes](https://avatars.discourse-cdn.com/v4/letter/d/f9ae1b/32.png) [@danbikes](https://forums.speedlife.net/u/danbikes)\ **Post date:** [July 4, 2011, 10:13am UTC](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982/20 "2011-07-04T10:13:28Z")
I will let you know, someone is already interested in the full kit as it sits right now. I haven’t gotten a deposit or anything yet so its still up for grabs however. [Next page](https://forums.speedlife.net/t/ic-full-hks-turbo-kit-ft/213982.md?page=2)