# IC: NECC engraved spin knobs **URL:** \ **Category:** Classifieds\ **Created:** [November 21, 2006, 10:44am UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139 "2006-11-21T10:44:07Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 21, 2006, 10:44am UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/1 "2006-11-21T10:44:07Z")
Hi guys, i am about to put another run through of spin knobs for myself now that i am all out. I wonder if you guys would like another run of the necc knobs done. necc, nwn and dirftnation all had knobs done last year. ![http://www.bings.ca/files/spin_turn_knob_2.jpg](http://www.bings.ca/files/spin_turn_knob_2.jpg) ![http://www.bings.ca/files/spin_turn_knob_3.jpg](http://www.bings.ca/files/spin_turn_knob_3.jpg) please note however, this is NOT A FOR SALE thread or a GROUP BUY instead, if there is enough interest in them i will have them made and delivered to one of your admin. the price structure would allow necc to retain a few bucks from each knob for club purposes. we did this last year like this as well, its more of a fund raiser than anything else. there is a minimum of 20 required, but i think you guys could go a bit more than that. obviously i would require payment before i run them but that wasnt an issue last year sooooo… who out there in Alberta would be down for some of these? ---
**Author:** ![Evan\_Mcclleland](https://avatars.discourse-cdn.com/v4/letter/e/41988e/32.png) [@Evan\_Mcclleland](https://forums.speedlife.net/u/Evan_Mcclleland)\ **Post date:** [November 21, 2006, 2:25pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/2 "2006-11-21T14:25:40Z")
i would buy one ---
**Author:** ![nis\_mo](https://avatars.discourse-cdn.com/v4/letter/n/82dd89/32.png) [@nis\_mo](https://forums.speedlife.net/u/nis_mo)\ **Post date:** [November 21, 2006, 6:28pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/3 "2006-11-21T18:28:09Z")
> [@Evan Mcclleland](#): > > i would buy one which one? perhaps a group but cna be set up for the “special” ones hahha ---
**Author:** ![Garret\_Volden](https://avatars.discourse-cdn.com/v4/letter/g/f475e1/32.png) [@Garret\_Volden](https://forums.speedlife.net/u/Garret_Volden)\ **Post date:** [November 21, 2006, 6:38pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/4 "2006-11-21T18:38:45Z")
how much are they? im down for a necc one not with a line through it though…depends how much they are i might buy a couple. ---
**Author:** ![TravyPoo](https://avatars.discourse-cdn.com/v4/letter/t/838e76/32.png) [@TravyPoo](https://forums.speedlife.net/u/TravyPoo)\ **Post date:** [November 21, 2006, 6:50pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/5 "2006-11-21T18:50:41Z")
Id be interested in a NECC one. how much? ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 21, 2006, 7:17pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/6 "2006-11-21T19:17:20Z")
i list them, unengraved for $20 ea. if you guys did a decent sized run then i could have them shipped to a central person and the price would certianly be less than that, engraved and shipped. it is really quantity dependent though. ---
**Author:** ![Garret\_Volden](https://avatars.discourse-cdn.com/v4/letter/g/f475e1/32.png) [@Garret\_Volden](https://forums.speedlife.net/u/Garret_Volden)\ **Post date:** [November 21, 2006, 7:19pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/7 "2006-11-21T19:19:06Z")
well if they are less than twenty i will buy 2 necc engraved and how much quantity do you need? ---
**Author:** ![TravyPoo](https://avatars.discourse-cdn.com/v4/letter/t/838e76/32.png) [@TravyPoo](https://forums.speedlife.net/u/TravyPoo)\ **Post date:** [November 21, 2006, 7:33pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/8 "2006-11-21T19:33:53Z")
ill take a NECC engraved one. how much more is it? ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 21, 2006, 8:26pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/9 "2006-11-21T20:26:21Z")
well boygirls, lets start a list… and this is only for the purpose of gauging quantity 1. 2. 3. 4. 315325942934. preferrably you dudes would be over 30, but 20 i guess would suffice… lets push for more though. they make a sick-ass stocking stuffer. ---
**Author:** ![Invalid\_Zero](https://avatars.discourse-cdn.com/v4/letter/i/ecae2f/32.png) [@Invalid\_Zero](https://forums.speedlife.net/u/Invalid_Zero)\ **Post date:** [November 21, 2006, 8:37pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/10 "2006-11-21T20:37:51Z")
> [@JVD240](#): > > How about necc with a circle and a line through it??? I’d be down for one of those. Why are you here then if NECC isn’t as JDM tight as Zilvia? ---
**Author:** ![TravyPoo](https://avatars.discourse-cdn.com/v4/letter/t/838e76/32.png) [@TravyPoo](https://forums.speedlife.net/u/TravyPoo)\ **Post date:** [November 21, 2006, 9:33pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/11 "2006-11-21T21:33:00Z")
1. Travypoo (NECC engraved, Edmonton) 2. 3. 4. 5. 6. 7. 8. 9. 10. ---
**Author:** ![Garret\_Volden](https://avatars.discourse-cdn.com/v4/letter/g/f475e1/32.png) [@Garret\_Volden](https://forums.speedlife.net/u/Garret_Volden)\ **Post date:** [November 21, 2006, 9:57pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/12 "2006-11-21T21:57:40Z")
1. Travypoo (NECC engraved, Edmonton) 2.Garret\_Volden(NECC engraved,Whitecourt)x2 2. 3. 4. 5. 6. 7. 8. 9. ---
**Author:** ![240sx2nr](https://avatars.discourse-cdn.com/v4/letter/2/97f17d/32.png) [@240sx2nr](https://forums.speedlife.net/u/240sx2nr)\ **Post date:** [November 21, 2006, 10:15pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/13 "2006-11-21T22:15:25Z")
1. Travypoo (NECC engraved, Edmonton) 2.Garret\_Volden(NECC engraved,Whitecourt)x2 3.Sentra2nr (NECC Engraved, Edmonton) X2 plz. 2. 3. 4. 5. 6. 7. 8. ---
**Author:** ![Citystars](https://avatars.discourse-cdn.com/v4/letter/c/97f17d/32.png) [@Citystars](https://forums.speedlife.net/u/Citystars)\ **Post date:** [November 21, 2006, 10:59pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/14 "2006-11-21T22:59:52Z")
> [@Sentra2nr](#): > > 1. Travypoo (NECC engraved, Edmonton) > 2.Garret\_Volden(NECC engraved,Whitecourt)x2 > 3.Sentra2nr (NECC Engraved, Edmonton) X2 plz. > 4.Citystars (NECC Engraved, Calgary) X2 yo! > 2. > 3. > 4. > 5. > 6. > 7. ---
**Author:** ![TyPhOOn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/typhoon/32/5800_2.png) [@TyPhOOn](https://forums.speedlife.net/u/TyPhOOn)\ **Post date:** [November 22, 2006, 2:14pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/15 "2006-11-22T14:14:16Z")
I would be down … but need to know how much total for each ---
**Author:** ![Evan\_Mcclleland](https://avatars.discourse-cdn.com/v4/letter/e/41988e/32.png) [@Evan\_Mcclleland](https://forums.speedlife.net/u/Evan_Mcclleland)\ **Post date:** [November 22, 2006, 5:23pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/16 "2006-11-22T17:23:33Z")
> [@Citystars](#): > > [quote=Sentra2nr]1. Travypoo (NECC engraved, Edmonton) > 2.Garret\_Volden(NECC engraved,Whitecourt)x2 > 3.Sentra2nr (NECC Engraved, Edmonton) X2 plz. > 4.Citystars (NECC Engraved, Calgary) X2 yo! > 5.evan mcclleland (NECC engraved, calgary) > 6. > 7. > 8. > 9. > 10. [/quote] ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 22, 2006, 5:24pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/17 "2006-11-22T17:24:58Z")
obviously there is enough demand… and it appears as though a couple other clubs are getting down with it as well. i have to get everything requoted and i wil update this thread ---
**Author:** ![nis\_mo](https://avatars.discourse-cdn.com/v4/letter/n/82dd89/32.png) [@nis\_mo](https://forums.speedlife.net/u/nis_mo)\ **Post date:** [November 22, 2006, 6:26pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/18 "2006-11-22T18:26:30Z")
what about the ones with the line through it??? i know of a few ppl interested already…lets add that one! ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 22, 2006, 6:55pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/19 "2006-11-22T18:55:16Z")
if you are suggesting an anti-necc spin knob i dont know… maybe if i double the price…lol nah, i dont want to get into that kind of bullshit anyways, we have that type of faction on SON as well, best not to feed it. also, i imagine that would be very difficult for the CNC machine to interpret. ---
**Author:** ![DeathBy240](https://avatars.discourse-cdn.com/v4/letter/d/258eb7/32.png) [@DeathBy240](https://forums.speedlife.net/u/DeathBy240)\ **Post date:** [November 22, 2006, 7:37pm UTC](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139/20 "2006-11-22T19:37:40Z")
> [@nis\_mo](#): > > what about the ones with the line through it??? i know of a few ppl interested already…lets add that one! Kent, if you dislike NECC so much you can stop posting at any time. You’re the 11th top poster so you can’t hate it that much. Any other posts of this nature will be deleted for obvious reasons. [Next page](https://forums.speedlife.net/t/ic-necc-engraved-spin-knobs/145139.md?page=2)