# Ice riding Saturday, February 8th - anyone?

**URL:** https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132
**Category:** Shift518 Automotive
**Created:** [February 6, 2014, 11:31am UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132 "2014-02-06T11:31:23Z")
**Posts on this page:** 20
**Page:** 1

<div class="post-metadata">

### Author: ![crAppAchic0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crappachic0/32/6306_2.png) [@crAppAchic0](https://forums.speedlife.net/u/crAppAchic0)
#### Post date: [February 6, 2014, 11:31am UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/1 "2014-02-06T11:31:23Z")

</div>

This Saturday, I’m hoping to ride over at Wager’s Pond - but, as I don’t have a four wheeler with a plow, I’ll ride where ever the snow is plowed off the ice. Anyone planning on riding on Saturday? Where? Anyone know of somewhere people are or have been riding?

My brothers and I are bringing our 100’s, should be a good time…

…if there is a place to ride, with snow cleared off, of course.

---

<div class="post-metadata">

### Author: ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)
#### Post date: [February 6, 2014, 11:40am UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/2 "2014-02-06T11:40:07Z")

</div>

I wish mine wasn’t broke. Ive been wanting to ride for a while.

---

<div class="post-metadata">

### Author: ![crAppAchic0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crappachic0/32/6306_2.png) [@crAppAchic0](https://forums.speedlife.net/u/crAppAchic0)
#### Post date: [February 6, 2014, 11:53am UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/3 "2014-02-06T11:53:41Z")

</div>

Well, fix it then! What’s broke? You’ve got a couple days, shouldn’t be too bad- right?

---

<div class="post-metadata">

### Author: ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)
#### Post date: [February 6, 2014, 12:10pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/4 "2014-02-06T12:10:08Z")

</div>

it needs bearings and cv boots and has been at a friends garage for about 3 months now.

I don’t want to dump a ton of money into it but I just want it ride able

---

<div class="post-metadata">

### Author: ![crAppAchic0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crappachic0/32/6306_2.png) [@crAppAchic0](https://forums.speedlife.net/u/crAppAchic0)
#### Post date: [February 6, 2014, 12:20pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/5 "2014-02-06T12:20:00Z")

</div>

Well, the work is quick, but, yeah- parts are always money. Shouldn’t be a ton for new bearings and boots, though- how much?

What kind of quad again?

---

<div class="post-metadata">

### Author: ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)
#### Post date: [February 6, 2014, 12:26pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/6 "2014-02-06T12:26:28Z")

</div>

I don’t really know which ones it needs. Ive already got the boots.

Its a 2007 Polaris Outlaw 500- a real bastard quad that nobody makes parts for and everything is expensive.

---

<div class="post-metadata">

### Author: ![crAppAchic0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crappachic0/32/6306_2.png) [@crAppAchic0](https://forums.speedlife.net/u/crAppAchic0)
#### Post date: [February 6, 2014, 12:31pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/7 "2014-02-06T12:31:26Z")

</div>

Crap. That sucks.

So…

…borrow someone else’s!

(with a plow)

---

<div class="post-metadata">

### Author: ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)
#### Post date: [February 6, 2014, 12:33pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/8 "2014-02-06T12:33:23Z")

</div>

I don’t know anybody with a plow on one. My brother’s Outlaw 500 needs a tire and hasn’t been started since fall and is basically a snow bank now.

---

<div class="post-metadata">

### Author: ![crAppAchic0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crappachic0/32/6306_2.png) [@crAppAchic0](https://forums.speedlife.net/u/crAppAchic0)
#### Post date: [February 6, 2014, 1:03pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/9 "2014-02-06T13:03:08Z")

</div>

swap a wheel from yours onto your brothers; start it up?

---

<div class="post-metadata">

### Author: ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)
#### Post date: [February 6, 2014, 1:05pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/10 "2014-02-06T13:05:53Z")

</div>

my wheels are 45 minutes away and I don’t feel like unburying his. It really needs a new brake master cylinder too, not sure how long the JB Welded in bolt where the glass window in it was will hold. It was a quick cob job so he could ride it one weekend in the fall, where he got the flat.

---

<div class="post-metadata">

### Author: ![crAppAchic0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crappachic0/32/6306_2.png) [@crAppAchic0](https://forums.speedlife.net/u/crAppAchic0)
#### Post date: [February 6, 2014, 1:11pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/11 "2014-02-06T13:11:32Z")

</div>

Unburying is easy (think of it as exercise).

The glass is on the reservoir, not pressurized (pretty sure?) - silicone would seal it just fine (temporarily). Eh you don’t use brakes much on the ice anyway. Which brake, btw- front or rear?

45 minutes away? Drive faster.

---

<div class="post-metadata">

### Author: ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)
#### Post date: [February 6, 2014, 1:16pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/12 "2014-02-06T13:16:50Z")

</div>

I thought it was for both brakes.  
The jb weld seemed to work ok but its more of a temporary fix than permanent. I threaded a bolt into the window hole and sealed it up good.  
His quad is in the middle of the backyard and getting it out requires removing half the snow from the yard due to where the gate is.

I don’t have access to mine anyway.

---

<div class="post-metadata">

### Author: ![crAppAchic0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crappachic0/32/6306_2.png) [@crAppAchic0](https://forums.speedlife.net/u/crAppAchic0)
#### Post date: [February 6, 2014, 1:23pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/13 "2014-02-06T13:23:33Z")

</div>

Okay, I’m all out of ideas. Might have to just go and steal one.

Preferably 4WD, with a plow.

And studded/screwed tires.

And a beer holder.

And heated grips.

---

<div class="post-metadata">

### Author: ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)
#### Post date: [February 6, 2014, 1:30pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/14 "2014-02-06T13:30:58Z")

</div>

Might be the only option

---

<div class="post-metadata">

### Author: ![crAppAchic0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crappachic0/32/6306_2.png) [@crAppAchic0](https://forums.speedlife.net/u/crAppAchic0)
#### Post date: [February 6, 2014, 1:32pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/15 "2014-02-06T13:32:59Z")

</div>

Well, you’ve got a couple days!

---

<div class="post-metadata">

### Author: ![crAppAchic0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crappachic0/32/6306_2.png) [@crAppAchic0](https://forums.speedlife.net/u/crAppAchic0)
#### Post date: [February 7, 2014, 2:18pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/16 "2014-02-07T14:18:42Z")

</div>

Well, anyone that wants to go, we’re going to ride up north- outside of Schuylerville. If anyone wants to meet up, shoot me a PM.

---

<div class="post-metadata">

### Author: ![Code\_Blue](https://avatars.discourse-cdn.com/v4/letter/c/7ea924/32.png) [@Code\_Blue](https://forums.speedlife.net/u/Code_Blue)
#### Post date: [February 8, 2014, 9:06am UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/17 "2014-02-08T09:06:40Z")

</div>

I doubt my yfm200 rigid chassis would make it lol

---

<div class="post-metadata">

### Author: ![Criscone24](https://avatars.discourse-cdn.com/v4/letter/c/7993a0/32.png) [@Criscone24](https://forums.speedlife.net/u/Criscone24)
#### Post date: [February 8, 2014, 12:19pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/18 "2014-02-08T12:19:56Z")

</div>

You run actual tracks or just bomb around?

---

<div class="post-metadata">

### Author: ![crAppAchic0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crappachic0/32/6306_2.png) [@crAppAchic0](https://forums.speedlife.net/u/crAppAchic0)
#### Post date: [February 10, 2014, 9:21am UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/19 "2014-02-10T09:21:30Z")

</div>

> [@Code Blue](#):
>
> I doubt my yfm200 rigid chassis would make it lol

I honestly have no idea, but the tires are probably plenty to absorb anything significant on ice, I’d guess. But you’d want some studded/screwed tires though, I’m sure.

> [@Criscone24](#):
>
> You run actual tracks or just bomb around?

We usually run a TT or ‘road’ course, but depending on who goes- there’s sometimes an oval as well.

---

<div class="post-metadata">

### Author: ![Criscone24](https://avatars.discourse-cdn.com/v4/letter/c/7993a0/32.png) [@Criscone24](https://forums.speedlife.net/u/Criscone24)
#### Post date: [February 10, 2014, 1:07pm UTC](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132/20 "2014-02-10T13:07:54Z")

</div>

I run the TT class with electric city riders. It’s my first year doing it, so much fun. However running in the 450 class with a 400ex blows. I can pass in the turns but get smoked on the straights. If I continue this racing thing I’ll be picking up a 450.

Anyhow if also have my own TT track out here in averill park. Anyone is welcome, however only way on lake is through someone’s property (my buddies, it’s a private lake). Usually out there 2x during week practicing for weekend. This weekend is last race, so I’ll have a lot more time to just have fun.

[Next page](https://forums.speedlife.net/t/ice-riding-saturday-february-8th-anyone/268132.md?page=2)
