# Idleing Problem

**URL:** <https://forums.speedlife.net/t/idleing-problem/119776>\
**Category:** SON240sx Automotive\
**Created:** [November 10, 2008, 1:18pm UTC](https://forums.speedlife.net/t/idleing-problem/119776 "2008-11-10T13:18:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![240sxlove](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/240sxlove/32/5719_2.png) [@240sxlove](https://forums.speedlife.net/u/240sxlove)\
**Post date:** [November 10, 2008, 1:18pm UTC](https://forums.speedlife.net/t/idleing-problem/119776/1 "2008-11-10T13:18:40Z")

</div>

I have a 1990 240sx hatchback, with the stock ka. It will start no problem but if i dont give it gas it will die right away. It starts and will idle at like 2000 rpm for a second or two than just drops and will die. The other thing is, ill barley touch the gas pedal and it will rev to 3000 -4000 rpm?!?! lol and at stop lights people stare cause im reving it so it wont die ahhaa Can anyone please help me?!?!

---

<div class="post-metadata">

**Author:** ![Specialedition](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/specialedition/32/5714_2.png) [@Specialedition](https://forums.speedlife.net/u/Specialedition)\
**Post date:** [November 10, 2008, 5:54pm UTC](https://forums.speedlife.net/t/idleing-problem/119776/2 "2008-11-10T17:54:03Z")

</div>

sounds like a vacuum leak, or a sensor

---

<div class="post-metadata">

**Author:** ![Leafsfan](https://avatars.discourse-cdn.com/v4/letter/l/bbce88/32.png) [@Leafsfan](https://forums.speedlife.net/u/Leafsfan)\
**Post date:** [November 10, 2008, 5:55pm UTC](https://forums.speedlife.net/t/idleing-problem/119776/3 "2008-11-10T17:55:37Z")

</div>

Best guess would most likely be an Idle air control valve (nissan calls it an Idle air adjusting unit) Other causes might be a vacuum leak or possibly a charging system problem.

Easiest way to check it is to tap it with a hammer or screw driver. If it works normal after you tap it, either try taking it off and cleaning it or for best results replace it.
