# Ignition breakup/Bogging/Backfiring

**URL:** <https://forums.speedlife.net/t/ignition-breakup-bogging-backfiring/128005>\
**Category:** SON240sx Automotive\
**Created:** [September 14, 2009, 2:36pm UTC](https://forums.speedlife.net/t/ignition-breakup-bogging-backfiring/128005 "2009-09-14T14:36:06Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![alesserfate](https://avatars.discourse-cdn.com/v4/letter/a/f6c823/32.png) [@alesserfate](https://forums.speedlife.net/u/alesserfate)\
**Post date:** [September 24, 2009, 5:32pm UTC](https://forums.speedlife.net/t/ignition-breakup-bogging-backfiring/128005/13 "2009-09-24T17:32:48Z")

</div>

> [@FS: 1992 Civic VX](https://forums.speedlife.net/t/fs-1992-civic-vx/24052/14):
>
> don’t use brake cleaner, spend a few $$ on some electrical contact cleaner from crappy tire, and just spray the crap outta it without touching the wire. get the little red extension as close as you can to it, but don’t touch it.

its the abs sensor safe brake cleaner, people use it and it works, if you use contact cleaner, that actually could eat away at the metal since its supposed to eat away corrosion, trust me, dont put the red straw with high pressure near it either, your more likely to break it with the pressure then to lightly skim it with a q tip

just my two cents, no hard feelings, its all up to you in the end

---

_[View the full topic](https://forums.speedlife.net/t/ignition-breakup-bogging-backfiring/128005)._