# ignitor chip

**URL:** <https://forums.speedlife.net/t/ignitor-chip/80188>\
**Category:** SON240sx Automotive\
**Created:** [October 20, 2003, 12:07pm UTC](https://forums.speedlife.net/t/ignitor-chip/80188 "2003-10-20T12:07:43Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Doba](https://avatars.discourse-cdn.com/v4/letter/d/a8b319/32.png) [@Doba](https://forums.speedlife.net/u/Doba)\
**Post date:** [October 20, 2003, 12:07pm UTC](https://forums.speedlife.net/t/ignitor-chip/80188/1 "2003-10-20T12:07:43Z")

</div>

Sooo in the SR “clip” the harness came out on the passenger’s side meaning the chip was mounted on the passengers strut side (meaning my 240’s drivers side)  
but my harness comes out on my passengers side (other side) so do people extend the entire chip or just the individual connectors to the other side?  
…confusing \*\*\*\* when you read it…lol

---

<div class="post-metadata">

**Author:** ![Sasha\_SG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sasha_sg/32/5477_2.png) [@Sasha\_SG](https://forums.speedlife.net/u/Sasha_SG)\
**Post date:** [October 20, 2003, 12:31pm UTC](https://forums.speedlife.net/t/ignitor-chip/80188/2 "2003-10-20T12:31:38Z")

</div>

leave the chip on drivers side, less heat there.

---

<div class="post-metadata">

**Author:** ![Doba](https://avatars.discourse-cdn.com/v4/letter/d/a8b319/32.png) [@Doba](https://forums.speedlife.net/u/Doba)\
**Post date:** [October 21, 2003, 5:02am UTC](https://forums.speedlife.net/t/ignitor-chip/80188/3 "2003-10-21T05:02:09Z")

</div>

youre right that would be nice, but the abs system is in the way, then theres the fuel lines and pump and the chip just wont reach further past that.  
we’ll see.

---

<div class="post-metadata">

**Author:** ![Sasha\_SG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sasha_sg/32/5477_2.png) [@Sasha\_SG](https://forums.speedlife.net/u/Sasha_SG)\
**Post date:** [October 21, 2003, 7:05am UTC](https://forums.speedlife.net/t/ignitor-chip/80188/4 "2003-10-21T07:05:16Z")

</div>

zip tie the chip to the ABS unit

---

<div class="post-metadata">

**Author:** ![SHIFT\_KA24DET](https://avatars.discourse-cdn.com/v4/letter/s/b9bd4f/32.png) [@SHIFT\_KA24DET](https://forums.speedlife.net/u/SHIFT_KA24DET)\
**Post date:** [October 21, 2003, 12:18pm UTC](https://forums.speedlife.net/t/ignitor-chip/80188/5 "2003-10-21T12:18:06Z")

</div>

Go Zipties. 😃

They gotta be JDM made or else it wont work 😛