# IM DONE! GET THIS OFF AND WIN A PRIZE. **URL:** \ **Category:** SON240sx Automotive\ **Created:** [October 5, 2011, 7:20am UTC](https://forums.speedlife.net/t/im-done-get-this-off-and-win-a-prize/217181 "2011-10-05T07:20:12Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [October 5, 2011, 7:20am UTC](https://forums.speedlife.net/t/im-done-get-this-off-and-win-a-prize/217181/1 "2011-10-05T07:20:12Z")
POS lugnut sheared off on the purple rx7. Tried numerous lugnut removal things. (not much to hold on to ☹ Air chisel, NOPE Loosen all 4 other nuts and drive it for 15 mins? Still tight. Basically, the car cannot be moved due to lack on body panels, windsheild and wiring, so I need my nut off! Im looking for someone that can come with their own tools(i can provide electricity, conversation, womens and beverage, perhaps food) and financial re-embursement, for the nut being removed. Please contact via text, phone or carrier pidgeon to 905 962 7498 Thanks. The car is in Hamilton. Again, I cannot come to you! Car doesnt drive! ---
**Author:** ![d240](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/d240/32/5779_2.png) [@d240](https://forums.speedlife.net/u/d240)\ **Post date:** [October 5, 2011, 7:42am UTC](https://forums.speedlife.net/t/im-done-get-this-off-and-win-a-prize/217181/2 "2011-10-05T07:42:52Z")
that sucks…I would centre punch the wheel stud and drill it starting with a good small drill and a shitload of patience…then replace the wheel stud once you are done …not fun but… I had to do the same thing with a friggen front stut bolt through my spindle yesterday 🙂 ---
**Author:** ![Aaj2k5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aaj2k5/32/5731_2.png) [@Aaj2k5](https://forums.speedlife.net/u/Aaj2k5)\ **Post date:** [October 5, 2011, 8:46am UTC](https://forums.speedlife.net/t/im-done-get-this-off-and-win-a-prize/217181/3 "2011-10-05T08:46:48Z")
How quality are the wheels on it? ie Oxy acetylene cutting torch and be done with it. ---
**Author:** ![NissanNoob89](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nissannoob89/32/6165_2.png) [@NissanNoob89](https://forums.speedlife.net/u/NissanNoob89)\ **Post date:** [October 5, 2011, 11:57am UTC](https://forums.speedlife.net/t/im-done-get-this-off-and-win-a-prize/217181/4 "2011-10-05T11:57:57Z")
I’d try beating the piss out of it with a sledge on the back of the tire, obviously with the car raised in the air. my neighbor is coincidentally going through the same thing with his chrysler, so i give you the same advice i gave to him. also you can try getting to the back of the hub and maybe cutting the wheel stud off. then once the tire is off the car pound it out of the rim. wheel stud-6$ ---
**Author:** ![Welmer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/welmer/32/5771_2.png) [@Welmer](https://forums.speedlife.net/u/Welmer)\ **Post date:** [October 5, 2011, 1:14pm UTC](https://forums.speedlife.net/t/im-done-get-this-off-and-win-a-prize/217181/5 "2011-10-05T13:14:00Z")
I think sharpe\_corners is quote/unquote “done” with trying to do so… as the post says he will award you with the removal of these lugs… I think if he had enuff patiences ( Im sure he’s a busy guy ) to try to get the lugs off I’m sure he would have already had them off by now ( also I’m sure he’s mechanically inclined ). 🙂 ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [October 5, 2011, 1:27pm UTC](https://forums.speedlife.net/t/im-done-get-this-off-and-win-a-prize/217181/6 "2011-10-05T13:27:59Z")
get a drill and drill out the stud, it will take about 10 mins and you will be done, we do it all the time at the shop farmer ---
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [October 5, 2011, 5:12pm UTC](https://forums.speedlife.net/t/im-done-get-this-off-and-win-a-prize/217181/7 "2011-10-05T17:12:59Z")
Paid friend 40 dollars. Drilled it out. Voila. Those bolt removal thread guys wanted 120 dollars. I laughed. It took less than 10 mins. ---
**Author:** ![\_Punisher](https://avatars.discourse-cdn.com/v4/letter/_/bb73d2/32.png) [@\_Punisher](https://forums.speedlife.net/u/_Punisher)\ **Post date:** [October 5, 2011, 8:54pm UTC](https://forums.speedlife.net/t/im-done-get-this-off-and-win-a-prize/217181/8 "2011-10-05T20:54:51Z")
Dylan got his nut off…dirty ---
**Author:** ![NissanNoob89](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nissannoob89/32/6165_2.png) [@NissanNoob89](https://forums.speedlife.net/u/NissanNoob89)\ **Post date:** [October 5, 2011, 10:30pm UTC](https://forums.speedlife.net/t/im-done-get-this-off-and-win-a-prize/217181/9 "2011-10-05T22:30:03Z")
ahh good stuff. glad to hear it went smooth getting your nut off…-\_\_- lol ---
**Author:** ![izzo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/izzo/32/5769_2.png) [@izzo](https://forums.speedlife.net/u/izzo)\ **Post date:** [October 8, 2011, 12:43am UTC](https://forums.speedlife.net/t/im-done-get-this-off-and-win-a-prize/217181/10 "2011-10-08T00:43:38Z")
sorry for the off topic chic chat but nissannoob89… did you happend to scrap a green ish looking ford escort??? with missing rims and shit last year??? around september??? and did you happend to call abram to come and get it with a flat bed??? if so… i was that asian kid in that hino flat bed eh? lol lol if not awh what ever lol