# Injector help.

**URL:** <https://forums.speedlife.net/t/injector-help/6118>\
**Category:** NYSpeed Automotive\
**Created:** [December 26, 2005, 6:01pm UTC](https://forums.speedlife.net/t/injector-help/6118 "2005-12-26T18:01:01Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![ezfd](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ezfd/32/7334_2.png) [@ezfd](https://forums.speedlife.net/u/ezfd)\
**Post date:** [December 26, 2005, 6:01pm UTC](https://forums.speedlife.net/t/injector-help/6118/1 "2005-12-26T18:01:01Z")

</div>

Does anyone know a shop in the area that works on fuel injectors? I’m looking to have my primaries cleaned, balanced and blueprinted and my secondaries cleaned and enlarged from 850cc/min to 1200~1300cc/min. Let me know if anyone has input.

---

<div class="post-metadata">

**Author:** ![Adictd2b00st](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/adictd2b00st/32/7625_2.png) [@Adictd2b00st](https://forums.speedlife.net/u/Adictd2b00st)\
**Post date:** [December 26, 2005, 6:20pm UTC](https://forums.speedlife.net/t/injector-help/6118/2 "2005-12-26T18:20:28Z")

</div>

i’m assuming this is what you called about before? sorry, i was stuck at work for a 13 hr shift of nonstop installs. offhand i don’t know anyone local, but if you don’t mind sending them out RC engineering is always good

---

<div class="post-metadata">

**Author:** ![ezfd](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ezfd/32/7334_2.png) [@ezfd](https://forums.speedlife.net/u/ezfd)\
**Post date:** [December 26, 2005, 6:58pm UTC](https://forums.speedlife.net/t/injector-help/6118/3 "2005-12-26T18:58:35Z")

</div>

thanx Jay, i’ll check RC out.

---

<div class="post-metadata">

**Author:** ![rskrause](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rskrause/32/7367_2.png) [@rskrause](https://forums.speedlife.net/u/rskrause)\
**Post date:** [December 27, 2005, 6:45am UTC](https://forums.speedlife.net/t/injector-help/6118/4 "2005-12-27T06:45:20Z")

</div>

Kennedy’s can clean 'em and flow them, but not enlarge them AFAIK.

Rich

---

<div class="post-metadata">

**Author:** ![IROC-Z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/iroc-z/32/7389_2.png) [@IROC-Z](https://forums.speedlife.net/u/IROC-Z)\
**Post date:** [December 27, 2005, 11:49am UTC](https://forums.speedlife.net/t/injector-help/6118/5 "2005-12-27T11:49:29Z")

</div>

As far as cleaning and flowmatching, I am very pleased with [http://www.cruzinperformance.com/](http://www.cruzinperformance.com/). Great work, and quick return time.