# Injector question **URL:** https://forums.speedlife.net/t/injector-question/229862 **Category:** SON240sx Automotive **Created:** [April 9, 2013, 7:08am UTC](https://forums.speedlife.net/t/injector-question/229862 "2013-04-09T07:08:19Z") **Posts on this page:** 8 **Page:** 1
### Author: ![robin420](https://avatars.discourse-cdn.com/v4/letter/r/c6cbf5/32.png) [@robin420](https://forums.speedlife.net/u/robin420) #### Post date: [April 9, 2013, 7:08am UTC](https://forums.speedlife.net/t/injector-question/229862/1 "2013-04-09T07:08:19Z")
I recently got a set of the yellow nismo 555cc injectors. I went to install them and noticed when I tried to plug the harness to them. That they are different then stock injector harness ends. Does anyone know where to buy these. I have a pic of them but it wont let me upload. ---
### Author: ![robin420](https://avatars.discourse-cdn.com/v4/letter/r/c6cbf5/32.png) [@robin420](https://forums.speedlife.net/u/robin420) #### Post date: [April 9, 2013, 7:24am UTC](https://forums.speedlife.net/t/injector-question/229862/2 "2013-04-09T07:24:20Z")
[ATTACH=CONFIG]23467[/ATTACH][ATTACH=CONFIG]23467[/ATTACH] ---
### Author: ![Clutchfire](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/clutchfire/32/5654_2.png) [@Clutchfire](https://forums.speedlife.net/u/Clutchfire) #### Post date: [April 9, 2013, 7:26am UTC](https://forums.speedlife.net/t/injector-question/229862/3 "2013-04-09T07:26:45Z")
do they have 2 pins? if so you can use a small female wire connectors and splice it into your harness. That’s how I got my JDM lights to work with a Canadian car. your only problem is you have a 50/50 chance of getting your wiring right or backwards. On the other hand the injector might accept current from any direction and if that’s the case yeah plug it in done. just get the right size of wire connector to slide over the injector pins. Just make sure you wrap them well to keep water out. ---
### Author: ![robin420](https://avatars.discourse-cdn.com/v4/letter/r/c6cbf5/32.png) [@robin420](https://forums.speedlife.net/u/robin420) #### Post date: [April 9, 2013, 7:29am UTC](https://forums.speedlife.net/t/injector-question/229862/4 "2013-04-09T07:29:51Z")
Ya i also thought about just removing the black shroud part that clips onto the injector and just use it that way cuz Im pretty sure it will work. i just wanted to get some info before i decide to hack apart my harness ---
### Author: ![robin420](https://avatars.discourse-cdn.com/v4/letter/r/c6cbf5/32.png) [@robin420](https://forums.speedlife.net/u/robin420) #### Post date: [April 20, 2013, 9:52am UTC](https://forums.speedlife.net/t/injector-question/229862/5 "2013-04-20T09:52:42Z")
The numbers on the injectors are 0092 7919 5 any help would be great. It’s the last thing I gotta finish ---
### Author: ![bmart](https://avatars.discourse-cdn.com/v4/letter/b/9d8465/32.png) [@bmart](https://forums.speedlife.net/u/bmart) #### Post date: [April 20, 2013, 10:05am UTC](https://forums.speedlife.net/t/injector-question/229862/6 "2013-04-20T10:05:24Z")
If its anything like when i put rx7 injectors in my rb20, than all you have to do is trim the bars that run along the socket. ![http://i271.photobucket.com/albums/jj136/bmart1986/image.jpg](http://i271.photobucket.com/albums/jj136/bmart1986/image.jpg) ---
### Author: ![robin420](https://avatars.discourse-cdn.com/v4/letter/r/c6cbf5/32.png) [@robin420](https://forums.speedlife.net/u/robin420) #### Post date: [April 20, 2013, 11:10am UTC](https://forums.speedlife.net/t/injector-question/229862/7 "2013-04-20T11:10:52Z")
Ok thanks I will give it a shot and c if it works ---
### Author: ![robin420](https://avatars.discourse-cdn.com/v4/letter/r/c6cbf5/32.png) [@robin420](https://forums.speedlife.net/u/robin420) #### Post date: [April 20, 2013, 5:18pm UTC](https://forums.speedlife.net/t/injector-question/229862/8 "2013-04-20T17:18:03Z")
Seems to work but is it gonna matter that the ends are on upside down. Or am I gonna have to switch the wires?