# injectors??

**URL:** <https://forums.speedlife.net/t/injectors/114309>\
**Category:** SON240sx Automotive\
**Created:** [March 31, 2008, 8:23pm UTC](https://forums.speedlife.net/t/injectors/114309 "2008-03-31T20:23:36Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![DRFT\_Jeff](https://avatars.discourse-cdn.com/v4/letter/d/bc79bd/32.png) [@DRFT\_Jeff](https://forums.speedlife.net/u/DRFT_Jeff)\
**Post date:** [March 31, 2008, 8:23pm UTC](https://forums.speedlife.net/t/injectors/114309/1 "2008-03-31T20:23:36Z")

</div>

is there anyway that you can check if the enjectors are spraying right without bolting them in on a s13 ka24de? like taking the whole fuel rail of and holdin them out or something?

If i keep blowing seals on injectors when istalling what is the problem  
?

Do i have to put white grease on them when installing?

---

<div class="post-metadata">

**Author:** ![Hurricane](https://avatars.discourse-cdn.com/v4/letter/h/e9bcb4/32.png) [@Hurricane](https://forums.speedlife.net/u/Hurricane)\
**Post date:** [March 31, 2008, 10:04pm UTC](https://forums.speedlife.net/t/injectors/114309/2 "2008-03-31T22:04:23Z")

</div>

If you are tearing the seals or they aren’t sitting right they will leak. Put a little motor oil or something on the seals to lube them up.

The injectors should click into place when seated properly.