# Inner Tie Rod Removal Help
**URL:** https://forums.speedlife.net/t/inner-tie-rod-removal-help/114388
**Category:** SON240sx Automotive
**Created:** [April 3, 2008, 6:39pm UTC](https://forums.speedlife.net/t/inner-tie-rod-removal-help/114388 "2008-04-03T18:39:38Z")
**Posts on this page:** 9
**Page:** 1
### Author:  [@s13brian](https://forums.speedlife.net/u/s13brian)
#### Post date: [April 3, 2008, 6:39pm UTC](https://forums.speedlife.net/t/inner-tie-rod-removal-help/114388/1 "2008-04-03T18:39:38Z")
So today i removed the steering rack from my car wanting to change the one tie rod, and i just couldn’t get it to come off. Is there a special tool needed to remove it?
---
### Author:  [@ronnys13](https://forums.speedlife.net/u/ronnys13)
#### Post date: [April 3, 2008, 6:49pm UTC](https://forums.speedlife.net/t/inner-tie-rod-removal-help/114388/2 "2008-04-03T18:49:02Z")
there is a tool but if the rack is out of the car just use a wrench, dont impact it youll damage the rack, its just very tight sometimes. I suggest putting it in a vice.
---
### Author:  [@s13brian](https://forums.speedlife.net/u/s13brian)
#### Post date: [April 3, 2008, 6:50pm UTC](https://forums.speedlife.net/t/inner-tie-rod-removal-help/114388/3 "2008-04-03T18:50:36Z")
ah ok, me and buddy tried using wrenchs today and it was just really tight…ill give it another shot tmr, thanks
---
### Author:  [@ronnys13](https://forums.speedlife.net/u/ronnys13)
#### Post date: [April 3, 2008, 7:03pm UTC](https://forums.speedlife.net/t/inner-tie-rod-removal-help/114388/4 "2008-04-03T19:03:43Z")
oh and when you put the new one on, use locktight, the liquid stuff, sometimes it comes with the tie rod, and torque it to spec lol
---
### Author:  [@s13brian](https://forums.speedlife.net/u/s13brian)
#### Post date: [April 3, 2008, 7:10pm UTC](https://forums.speedlife.net/t/inner-tie-rod-removal-help/114388/5 "2008-04-03T19:10:31Z")
i’ll probably have to go buy that, becuase im just replacing the tie rod with another off another steering rack.
---
### Author:  [@CrypticNissan](https://forums.speedlife.net/u/CrypticNissan)
#### Post date: [April 3, 2008, 7:31pm UTC](https://forums.speedlife.net/t/inner-tie-rod-removal-help/114388/6 "2008-04-03T19:31:56Z")
id go new man… its not too expensive and its a process u dont want to repeat soon… (just go cheap, there ment to break, saves your expensive steering rack)
---
### Author:  [@s13brian](https://forums.speedlife.net/u/s13brian)
#### Post date: [April 3, 2008, 7:38pm UTC](https://forums.speedlife.net/t/inner-tie-rod-removal-help/114388/7 "2008-04-03T19:38:25Z")
where can i get a new one?
---
### Author:  [@Theo23](https://forums.speedlife.net/u/Theo23)
#### Post date: [April 3, 2008, 10:20pm UTC](https://forums.speedlife.net/t/inner-tie-rod-removal-help/114388/8 "2008-04-03T22:20:44Z")
Bing sells inner and outer kits for a good deal. Might as well change them both if you’re in there. ps: put the rack back in the car to get everything tight… if it’s in the vice, grab a safe (read: strong) spot on the rack.
---
### Author:  [@R33](https://forums.speedlife.net/u/R33)
#### Post date: [April 3, 2008, 11:00pm UTC](https://forums.speedlife.net/t/inner-tie-rod-removal-help/114388/9 "2008-04-03T23:00:44Z")
No one can beat this price
[http://cgi.ebay.ca/2-Outer-Tie-Rod-89-94-NISSAN-240SX-PULSAR-NX-87-90\_W0QQitemZ120242490257QQihZ002QQcategoryZ33593QQssPageNameZWDVWQQrdZ1QQcmdZViewItem](http://cgi.ebay.ca/2-Outer-Tie-Rod-89-94-NISSAN-240SX-PULSAR-NX-87-90_W0QQitemZ120242490257QQihZ002QQcategoryZ33593QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)
and its in Markam … so there isnt any customs bs