# installing a t3 turbo on a ca
**URL:** https://forums.speedlife.net/t/installing-a-t3-turbo-on-a-ca/140319
**Category:** Canada Nissan Automotive
**Created:** [October 14, 2005, 2:50pm UTC](https://forums.speedlife.net/t/installing-a-t3-turbo-on-a-ca/140319 "2005-10-14T14:50:14Z")
**Posts on this page:** 9
**Page:** 1
### Author:  [@insaneskiier](https://forums.speedlife.net/u/insaneskiier)
#### Post date: [October 14, 2005, 2:50pm UTC](https://forums.speedlife.net/t/installing-a-t3-turbo-on-a-ca/140319/1 "2005-10-14T14:50:14Z")
anyone who has done this, wat did you do with the coolant lines/outlets on the block? wat did you do for oil lines/fittings?
---
### Author:  [@silvia\_sr20det\_s13](https://forums.speedlife.net/u/silvia_sr20det_s13)
#### Post date: [October 14, 2005, 5:14pm UTC](https://forums.speedlife.net/t/installing-a-t3-turbo-on-a-ca/140319/2 "2005-10-14T17:14:53Z")
MAKE UR OWN!! DUUUUH!!! if u want what u need i got part numbers and stuff u can either bend around ur stock ones or get braided lines!
---
### Author:  [@sil\_eightyRPS13](https://forums.speedlife.net/u/sil_eightyRPS13)
#### Post date: [December 15, 2005, 10:18pm UTC](https://forums.speedlife.net/t/installing-a-t3-turbo-on-a-ca/140319/3 "2005-12-15T22:18:27Z")
deleted the coolant lines…as they are not needed…use a m14x1.25 make sure it doesnt not exceed 1" long… and the oil lines i ran a 10mm bsb(british pipe taper thread) to a -4an fitting…asuming u have the t3g u got from typh00n…use a 22" -4an earl’s stainless steel line…
---
### Author:  [@insaneskiier](https://forums.speedlife.net/u/insaneskiier)
#### Post date: [February 23, 2006, 2:45pm UTC](https://forums.speedlife.net/t/installing-a-t3-turbo-on-a-ca/140319/4 "2006-02-23T14:45:09Z")
> [@sil\_eightyRPS13](#):
>
> deleted the coolant lines…as they are not needed…use a m14x1.25 make sure it doesnt not exceed 1" long… and the oil lines i ran a 10mm bsb(british pipe taper thread) to a -4an fitting…asuming u have the t3g u got from typh00n…use a 22" -4an earl’s stainless steel line…
where did you get your bspt to -4an fitting from?
---
### Author:  [@TyPhOOn](https://forums.speedlife.net/u/TyPhOOn)
#### Post date: [February 23, 2006, 3:25pm UTC](https://forums.speedlife.net/t/installing-a-t3-turbo-on-a-ca/140319/5 "2006-02-23T15:25:10Z")
MOPAC sells earls lines and fittings
---
### Author:  [@insaneskiier](https://forums.speedlife.net/u/insaneskiier)
#### Post date: [February 23, 2006, 7:34pm UTC](https://forums.speedlife.net/t/installing-a-t3-turbo-on-a-ca/140319/6 "2006-02-23T19:34:25Z")
yeah but apparently they dont have the size for the supply that goes into the block
---
### Author:  [@silvia\_sr20det\_s13](https://forums.speedlife.net/u/silvia_sr20det_s13)
#### Post date: [February 23, 2006, 9:43pm UTC](https://forums.speedlife.net/t/installing-a-t3-turbo-on-a-ca/140319/7 "2006-02-23T21:43:37Z")
> [@chris](#):
>
> yeah but apparently they dont have the size for the supply that goes into the block
1/8NPT
---
### Author:  [@insaneskiier](https://forums.speedlife.net/u/insaneskiier)
#### Post date: [March 17, 2006, 12:35pm UTC](https://forums.speedlife.net/t/installing-a-t3-turbo-on-a-ca/140319/8 "2006-03-17T12:35:15Z")
> [@sil\_eightyRPS13](#):
>
> deleted the coolant lines…as they are not needed…use a m14x1.25 make sure it doesnt not exceed 1" long… and the oil lines i ran a 10mm bsb(british pipe taper thread) to a -4an fitting…asuming u have the t3g u got from typh00n…use a 22" -4an earl’s stainless steel line…
where did you find your metric to -an thing?
---
### Author:  [@sil\_eightyRPS13](https://forums.speedlife.net/u/sil_eightyRPS13)
#### Post date: [March 19, 2006, 2:17pm UTC](https://forums.speedlife.net/t/installing-a-t3-turbo-on-a-ca/140319/9 "2006-03-19T14:17:25Z")
> [@chris](#):
>
> [quote=sil\_eightyRPS13]deleted the coolant lines…as they are not needed…use a m14x1.25 make sure it doesnt not exceed 1" long… and the oil lines i ran a 10mm bsb(british pipe taper thread) to a -4an fitting…asuming u have the t3g u got from typh00n…use a 22" -4an earl’s stainless steel line…
where did you get your bspt to -4an fitting from?[/quote]
BOSCH HYDRAULICS in the west end…