# Installing AEM UEGO Wideband **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [March 3, 2009, 5:48pm UTC](https://forums.speedlife.net/t/installing-aem-uego-wideband/202090 "2009-03-03T17:48:37Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![Tonyklem](https://avatars.discourse-cdn.com/v4/letter/t/57b2e6/32.png) [@Tonyklem](https://forums.speedlife.net/u/Tonyklem)\ **Post date:** [March 4, 2009, 10:25am UTC](https://forums.speedlife.net/t/installing-aem-uego-wideband/202090/5 "2009-03-04T10:25:45Z")
> [@Callout: Muscle50, Cobraman04 & 01AudiS4](https://forums.speedlife.net/t/callout-muscle50-cobraman04-01audis4/39759/42): > > you don’t wire to a serial or usb unless you have a wideband controller that allows such wiring… a wideband is nothing more than 0-5v of power… does the nissan come with an OEM wideband? if so then I would simply wire the 0-5 into that… if it only has narrow maybe they want you to wire to narrow and the daughterboard is smart enough to realize it’s 5 volts? although… with different widebands are different variations for 0-5v’s to a/f… so you’d have to have the ability to calibrate the wideband in your ECU program, if you can’t find that, then they probably don’t support it. > > this is more of a question for the forum of the ECU deal you’re using. It just has a narrow band. I made a post on that forum, but it was in the general tuning section, maybe I’ll just repost it in the Calum Section. Thanks for the input so far. PS. I have an AEM-30-2300 if that helps. Yes, I know it’s a dual channel and yes I realize there’s no point in having a Dual over Single in my application, but I got this one for the price of a Single channel. I was planning on just wiring the 1st sensor. --- _[View the full topic](https://forums.speedlife.net/t/installing-aem-uego-wideband/202090)._