# Installing Catch Can

**URL:** <https://forums.speedlife.net/t/installing-catch-can/105662>\
**Category:** SON240sx Automotive\
**Created:** [April 17, 2007, 4:13pm UTC](https://forums.speedlife.net/t/installing-catch-can/105662 "2007-04-17T16:13:04Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Birdman12](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@Birdman12](https://forums.speedlife.net/u/Birdman12)\
**Post date:** [April 17, 2007, 4:13pm UTC](https://forums.speedlife.net/t/installing-catch-can/105662/1 "2007-04-17T16:13:04Z")

</div>

I’ve looked all around on the internet but couldn’t find a how-to for installing a catch can on an SR20. I have a S13 SR20 so if anyone could tell me how to hook it up or even have pictures while hooking theirs up that would be great! thanks in advance.

---

<div class="post-metadata">

**Author:** ![robbbby](https://avatars.discourse-cdn.com/v4/letter/r/b19c9b/32.png) [@robbbby](https://forums.speedlife.net/u/robbbby)\
**Post date:** [April 17, 2007, 6:25pm UTC](https://forums.speedlife.net/t/installing-catch-can/105662/2 "2007-04-17T18:25:01Z")

</div>

From the ‘T’ on your valve cover you will have one line running down to the crankcase just like the oem did, the other side goes to your catchcan and from your catchcan into your intake pipe before the turbocharger inlet.

---

<div class="post-metadata">

**Author:** ![Birdman12](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@Birdman12](https://forums.speedlife.net/u/Birdman12)\
**Post date:** [April 17, 2007, 7:27pm UTC](https://forums.speedlife.net/t/installing-catch-can/105662/3 "2007-04-17T19:27:34Z")

</div>

ok so that line comming from the crankcase that connects to the “T” stays there right? and i just hook take the line off from the “T” to the intake and just hook the catch can where that line would be right? i drew a little diagram…is this right?

![http://img257.imageshack.us/img257/3360/catchcanhookuppj3.jpg](http://img257.imageshack.us/img257/3360/catchcanhookuppj3.jpg)

---

<div class="post-metadata">

**Author:** ![robbbby](https://avatars.discourse-cdn.com/v4/letter/r/b19c9b/32.png) [@robbbby](https://forums.speedlife.net/u/robbbby)\
**Post date:** [April 18, 2007, 3:40am UTC](https://forums.speedlife.net/t/installing-catch-can/105662/4 "2007-04-18T03:40:19Z")

</div>

Yup, that looks right as long as that one line is going to the intake and not the charge piping. Also your PCV valve is on the other side of the valvecover 🙂