# installing decals (even in winter)

**URL:** <https://forums.speedlife.net/t/installing-decals-even-in-winter/132970>\
**Category:** Canada Nissan Automotive\
**Created:** [February 16, 2007, 7:45pm UTC](https://forums.speedlife.net/t/installing-decals-even-in-winter/132970 "2007-02-16T19:45:51Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![MikeP](https://avatars.discourse-cdn.com/v4/letter/m/a4c791/32.png) [@MikeP](https://forums.speedlife.net/u/MikeP)\
**Post date:** [February 21, 2007, 7:42pm UTC](https://forums.speedlife.net/t/installing-decals-even-in-winter/132970/4 "2007-02-21T19:42:11Z")

</div>

> [@One too many](https://forums.speedlife.net/t/one-too-many/992/10):
>
> No, not done. Stuck, and looking shitty.
> 
> However, you can edit/cut a few steps that Assass1n posted…
> 
> 1: clean the hell out of the area, remove wax, etc  
> 2: Soap the hell out of the area, you basically want to float your decal/sticker on the liquid.  
> 3: once you have it properly centered, and exactly where you want it, you can tape it, but I’d recommend doing it around the middle of the decal.  
> 4: Squeegy the liquid out from under the decal. Start from the center and work your way out, this ensures you don’t stretch the decal one way or the other, or shift it.  
> 5: use a blade to make sure all air bubbles are out, use a heat gun if necessary.  
> 6: Wipe area clean and enjoy.

A credit card works wonders for step #4

---

_[View the full topic](https://forums.speedlife.net/t/installing-decals-even-in-winter/132970)._