# Intercooler Endtank Design

**URL:** <https://forums.speedlife.net/t/intercooler-endtank-design/43560>\
**Category:** NYSpeed Automotive\
**Created:** [February 3, 2008, 8:25pm UTC](https://forums.speedlife.net/t/intercooler-endtank-design/43560 "2008-02-03T20:25:39Z")\
**Posts on this page:** 4\
**Page:** 2

<div class="post-metadata">

**Author:** ![TRP951](https://avatars.discourse-cdn.com/v4/letter/t/b77776/32.png) [@TRP951](https://forums.speedlife.net/u/TRP951)\
**Post date:** [March 19, 2008, 2:47pm UTC](https://forums.speedlife.net/t/intercooler-endtank-design/43560/21 "2008-03-19T14:47:29Z")

</div>

> [@TRP951](#):
>
> ok I have the material but is there **somewhere close** that can bead roll a pipe? Not sure if they can do .125" thick though

I dont feel like driving all the way there for 2 beads

---

<div class="post-metadata">

**Author:** ![MPD47](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mpd47/32/7383_2.png) [@MPD47](https://forums.speedlife.net/u/MPD47)\
**Post date:** [March 19, 2008, 2:49pm UTC](https://forums.speedlife.net/t/intercooler-endtank-design/43560/22 "2008-03-19T14:49:49Z")

</div>

Innovative has a bead roller.

---

<div class="post-metadata">

**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\
**Post date:** [March 19, 2008, 2:50pm UTC](https://forums.speedlife.net/t/intercooler-endtank-design/43560/23 "2008-03-19T14:50:24Z")

</div>

Inn-Tune IIRC

---

<div class="post-metadata">

**Author:** ![TRP951](https://avatars.discourse-cdn.com/v4/letter/t/b77776/32.png) [@TRP951](https://forums.speedlife.net/u/TRP951)\
**Post date:** [March 19, 2008, 2:50pm UTC](https://forums.speedlife.net/t/intercooler-endtank-design/43560/24 "2008-03-19T14:50:29Z")

</div>

ahh i didnt know that thanks Mike :tup:

[Previous page](https://forums.speedlife.net/t/intercooler-endtank-design/43560.md?page=1)