# intercooler piping location?

**URL:** <https://forums.speedlife.net/t/intercooler-piping-location/139610>\
**Category:** Canada Nissan Automotive\
**Created:** [July 25, 2005, 4:35pm UTC](https://forums.speedlife.net/t/intercooler-piping-location/139610 "2005-07-25T16:35:07Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![n1zm0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/n1zm0/32/3302_2.png) [@n1zm0](https://forums.speedlife.net/u/n1zm0)\
**Post date:** [July 25, 2005, 4:35pm UTC](https://forums.speedlife.net/t/intercooler-piping-location/139610/1 "2005-07-25T16:35:07Z")

</div>

so, a stock SMIC for SR, am going to have to cut a hole at all to fit both pipes?, i kno there is a hole already there for the airbox silencer (s-shaped pipe from the bottom of stock airbox to somehwere in hte front bumper airdam.

can anyone tell me or help me find a picture of the piping and its placements?

i acutally think i’m missing some pipes too, believe the 3 inch from the turbo to maf i am missing and intercooler intake hose under the turbo is cut.  
tnx

ps:there are 2 90 deg metal IC pipes? do i need both?

![http://x1.putfile.com/7/20519355974.jpg](http://x1.putfile.com/7/20519355974.jpg)  
this pipe here is cut. am i looking for a 90 bend hose?, sucks that lots of things are missing, but whatever.

---

<div class="post-metadata">

**Author:** ![DeathBy240](https://avatars.discourse-cdn.com/v4/letter/d/258eb7/32.png) [@DeathBy240](https://forums.speedlife.net/u/DeathBy240)\
**Post date:** [July 25, 2005, 6:11pm UTC](https://forums.speedlife.net/t/intercooler-piping-location/139610/2 "2005-07-25T18:11:39Z")

</div>

You need to cut that hole for the airbox big enough for two pipes to squeeze down there. Take a pic of what you have and I should be able to tell you what you are missing.

---

<div class="post-metadata">

**Author:** ![1mns13](https://avatars.discourse-cdn.com/v4/letter/1/8491ac/32.png) [@1mns13](https://forums.speedlife.net/u/1mns13)\
**Post date:** [July 26, 2005, 9:24pm UTC](https://forums.speedlife.net/t/intercooler-piping-location/139610/3 "2005-07-26T21:24:48Z")

</div>

If you have a 91 with SMIC cut the hole just like the stock template shows, if you have a FMIC, the hole that is already there is probably sufficient.

---

<div class="post-metadata">

**Author:** ![n1zm0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/n1zm0/32/3302_2.png) [@n1zm0](https://forums.speedlife.net/u/n1zm0)\
**Post date:** [July 26, 2005, 11:31pm UTC](https://forums.speedlife.net/t/intercooler-piping-location/139610/4 "2005-07-26T23:31:51Z")

</div>

ahh i gots it figured out, thnx for your help,. fairly easy now that i think about it, but taking the bumper off and ‘dry fitting’ the smic gave me a good idea of what i needed to do.

tnx again!