# IROC is 95% done, 1st Startup VID plus NEW pix\*

**URL:** https://forums.speedlife.net/t/iroc-is-95-done-1st-startup-vid-plus-new-pix/31721
**Category:** NYSpeed Automotive
**Created:** [June 29, 2007, 7:37pm UTC](https://forums.speedlife.net/t/iroc-is-95-done-1st-startup-vid-plus-new-pix/31721 "2007-06-29T19:37:04Z")
**Posts on this page:** 1
**Showing post:** 60

<div class="post-metadata">

### Author: ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)
#### Post date: [July 10, 2007, 10:56am UTC](https://forums.speedlife.net/t/iroc-is-95-done-1st-startup-vid-plus-new-pix/31721/60 "2007-07-10T10:56:41Z")

</div>

[quote=“Oroc,post:54,topic:31721"”]

and some pix of my roll bar install from a couple years ago, with all this roll bar talk i figured i’d show off how mine looks and the quality of the welds since i get alot of compliments on it. I learned everything from Vito Antonicelli as i used to do some chassis work for him, i notched the tubing and a very good friend of mine tig welded it in since i do not have a tig welder. Getting mine tigged in was a MUST, i like going to car shows and i like attention to fine detail.

[/quote]

Maybe the humpers will see this thread and finally understand what a quality cage looks like. Being that you learn from Vito I wouldn’t expect anything less than perfection

---

_[View the full topic](https://forums.speedlife.net/t/iroc-is-95-done-1st-startup-vid-plus-new-pix/31721)._