# it runs but not long, update, read last post

**URL:** <https://forums.speedlife.net/t/it-runs-but-not-long-update-read-last-post/16442>\
**Category:** NYSpeed Automotive\
**Created:** [August 24, 2006, 11:42pm UTC](https://forums.speedlife.net/t/it-runs-but-not-long-update-read-last-post/16442 "2006-08-24T23:42:51Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\
**Post date:** [August 25, 2006, 8:28pm UTC](https://forums.speedlife.net/t/it-runs-but-not-long-update-read-last-post/16442/13 "2006-08-25T20:28:14Z")

</div>

make sure the dizzy isnt 180\* out  
make sure the plug wires are hooked up in order 1-1, 2-2, etc  
make sure the cam was reinstalled properly in relation to TDC  
Were the heads reassembled at any point during “rebuild”?

> -when we put the motor at top dead center, as followed by dodge service manual book, the disturtor was maxxed out in one direction  
> What do You mean “maxxed out in one direction”? You mean it is physically blocked from adjusting any further? If so, in which direction: clockwise -or- counterclockwise? Dizzy shouldnt be “maxxed out”

---

_[View the full topic](https://forums.speedlife.net/t/it-runs-but-not-long-update-read-last-post/16442)._