# its the new guy **URL:** \ **Category:** Shift518 Off Topic\ **Created:** [March 11, 2012, 9:15am UTC](https://forums.speedlife.net/t/its-the-new-guy/262972 "2012-03-11T09:15:05Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Fcukjdm](https://avatars.discourse-cdn.com/v4/letter/f/a9adbd/32.png) [@Fcukjdm](https://forums.speedlife.net/u/Fcukjdm)\ **Post date:** [March 11, 2012, 9:15am UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/1 "2012-03-11T09:15:05Z")
I guess i finally signed up… pretty new to the area and new york. moved ffrom California and i dont know why. currently looking into Road racing again and HPDE. Trying to make a name for my self making shift knobs that can been seen on some of the cars at SYNAPSE ---
**Author:** ![daknut93](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/daknut93/32/6743_2.png) [@daknut93](https://forums.speedlife.net/u/daknut93)\ **Post date:** [March 11, 2012, 9:45am UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/2 "2012-03-11T09:45:56Z")
welcome becarful around here it gets tough… i need 2 shift nobs what do.u got? ---
**Author:** ![91teg](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91teg/32/6304_2.png) [@91teg](https://forums.speedlife.net/u/91teg)\ **Post date:** [March 11, 2012, 9:52am UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/3 "2012-03-11T09:52:57Z")
Welcome and lets see these shift knobs. ---
**Author:** ![Murrdog9000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/murrdog9000/32/6391_2.png) [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)\ **Post date:** [March 11, 2012, 11:11am UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/4 "2012-03-11T11:11:38Z")
Specialkid 2.0 ---
**Author:** ![91teg](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91teg/32/6304_2.png) [@91teg](https://forums.speedlife.net/u/91teg)\ **Post date:** [March 11, 2012, 11:13am UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/5 "2012-03-11T11:13:47Z")
:skid ---
**Author:** ![Fcukjdm](https://avatars.discourse-cdn.com/v4/letter/f/a9adbd/32.png) [@Fcukjdm](https://forums.speedlife.net/u/Fcukjdm)\ **Post date:** [March 11, 2012, 11:26am UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/6 "2012-03-11T11:26:33Z")
> [@Dexter on showtime.](https://forums.speedlife.net/t/dexter-on-showtime/18628/50): > > welcome becarful around here it gets tough… i need 2 shift nobs what do.u got? im sure i can tough it out… ive lived been in worse places… > [@91teg"](#): > > Welcome and lets see these shift knobs. im going to post pics in a minute… ---
**Author:** ![rexford\_flats\_racing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rexford_flats_racing/32/6295_2.png) [@rexford\_flats\_racing](https://forums.speedlife.net/u/rexford_flats_racing)\ **Post date:** [March 11, 2012, 12:02pm UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/7 "2012-03-11T12:02:11Z")
Dudes interested in knobs ITT. ---
**Author:** ![Fcukjdm](https://avatars.discourse-cdn.com/v4/letter/f/a9adbd/32.png) [@Fcukjdm](https://forums.speedlife.net/u/Fcukjdm)\ **Post date:** [March 11, 2012, 12:13pm UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/8 "2012-03-11T12:13:33Z")
Here are some pics of the 2 current knobs … Taller version(Billyclub) is about 4-1/2 to 5 inches… Ball style with extention, 2inch ball… Thread pitch is 10x1.5 can be done in other threads aswell… All are made from Aluminum will be making steel version soon, Some are handmade others on a CNC’ed . all drawn up by hand no CAD involved yet… Made one for the hell of it… People showed interest, so i made a few more… i was bring the meaning to myself “Built not bought” im currently working on new projects for a hatch im dearly searching for (EG hatch). im not settling for just anything… so expect to see more parts being made in the near future… ![http://farm8.staticflickr.com/7059/6973342063_58e53f353e_z.jpg](http://farm8.staticflickr.com/7059/6973342063_58e53f353e_z.jpg) ![http://farm8.staticflickr.com/7193/6973341323_1b74dbf6c7_z.jpg](http://farm8.staticflickr.com/7193/6973341323_1b74dbf6c7_z.jpg) ![http://farm8.staticflickr.com/7208/6827224304_abe9584459_z.jpg](http://farm8.staticflickr.com/7208/6827224304_abe9584459_z.jpg) These are sandblasted getting ready for powdercoating. ![http://farm8.staticflickr.com/7043/6963550381_1aa89fea1b_z.jpg](http://farm8.staticflickr.com/7043/6963550381_1aa89fea1b_z.jpg) ---
**Author:** ![RocketPunch](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rocketpunch/32/6429_2.png) [@RocketPunch](https://forums.speedlife.net/u/RocketPunch)\ **Post date:** [March 11, 2012, 2:00pm UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/9 "2012-03-11T14:00:37Z")
> [@new skins for the monte](https://forums.speedlife.net/t/new-skins-for-the-monte/48515/33): > > …currently looking into Road racing again and HPDE. Welcome! :clap What were you racing in Cali? ---
**Author:** ![91teg](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91teg/32/6304_2.png) [@91teg](https://forums.speedlife.net/u/91teg)\ **Post date:** [March 11, 2012, 2:05pm UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/10 "2012-03-11T14:05:56Z")
> [@WNY SCCA Solo Event 2 - ECCN 5/18/08](https://forums.speedlife.net/t/wny-scca-solo-event-2-eccn-5-18-08/48339/37): > > Here are some pics of the 2 current knobs … Taller version(Billyclub) is about 4-1/2 to 5 inches… Ball style with extention, 2inch ball… Thread pitch is 10x1.5 can be done in other threads aswell… All are made from Aluminum will be making steel version soon, Some are handmade others on a CNC’ed . all drawn up by hand no CAD involved yet… > > Made one for the hell of it… People showed interest, so i made a few more… i was bring the meaning to myself “Built not bought” im currently working on new projects for a hatch im dearly searching for (EG hatch). im not settling for just anything… so expect to see more parts being made in the near future… > > These are sandblasted getting ready for powdercoating. Nice, i think the ball would look better if it was just the ball ---
**Author:** ![Fcukjdm](https://avatars.discourse-cdn.com/v4/letter/f/a9adbd/32.png) [@Fcukjdm](https://forums.speedlife.net/u/Fcukjdm)\ **Post date:** [March 11, 2012, 2:48pm UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/11 "2012-03-11T14:48:07Z")
> [@2008 Buffalo Bandits Playoffs Thread](https://forums.speedlife.net/t/2008-buffalo-bandits-playoffs-thread/47757/41): > > Welcome! :clap What were you racing in Cali? just track days at willow springs, buttonwillow etc… i was building my car for time attack. then some chick rear-ended me and totalled the car … it was a 93 hatch. ---
**Author:** ![Fcukjdm](https://avatars.discourse-cdn.com/v4/letter/f/a9adbd/32.png) [@Fcukjdm](https://forums.speedlife.net/u/Fcukjdm)\ **Post date:** [March 11, 2012, 2:58pm UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/12 "2012-03-11T14:58:49Z")
> [@evo \> shelby](https://forums.speedlife.net/t/evo-shelby/48368/194): > > Nice, i think the ball would look better if it was just the ball reason for the extention so it would sit higher… you dont want a short shifter when road racing… the higher the better. makes for quick shifting… circuit hero makes a ball knob.you can by a extention piece or you can skip that and buy a fastline performance shifter which run 200$… pretty much my knobs are a in between option and cost effective for what im planning on doing … one i have in the middle of the sandblasted picture is also a new one made only one for now… ---
**Author:** ![RocketPunch](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rocketpunch/32/6429_2.png) [@RocketPunch](https://forums.speedlife.net/u/RocketPunch)\ **Post date:** [March 11, 2012, 3:55pm UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/13 "2012-03-11T15:55:24Z")
> [@5/10/08 - NYSpeed Photoshoot EVERYTHING IS SET AND READY TO GO FOR SATURDAY](https://forums.speedlife.net/t/5-10-08-nyspeed-photoshoot-everything-is-set-and-ready-to-go-for-saturday/46358/278): > > just track days at willow springs, buttonwillow etc… i was building my car for time attack. then some chick rear-ended me and totalled the car … it was a 93 hatch. Lots of people and some members are involved in HPDE and Drifting around here. Do check out the Race Day section. Have fun this season. ---
**Author:** ![Fcukjdm](https://avatars.discourse-cdn.com/v4/letter/f/a9adbd/32.png) [@Fcukjdm](https://forums.speedlife.net/u/Fcukjdm)\ **Post date:** [March 11, 2012, 5:46pm UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/14 "2012-03-11T17:46:53Z")
> [@FS: 2003 Buell Firebolt XB9R](https://forums.speedlife.net/t/fs-2003-buell-firebolt-xb9r/48589/20): > > Lots of people and some members are involved in HPDE and Drifting around here. Do check out the Race Day section. Have fun this season. i hoping i can get out this season…i got a car lined up just have to pick it up. plus i need to find out what tracks are around… ---
**Author:** ![Skidplate](https://avatars.discourse-cdn.com/v4/letter/s/c2a13f/32.png) [@Skidplate](https://forums.speedlife.net/u/Skidplate)\ **Post date:** [March 11, 2012, 6:00pm UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/15 "2012-03-11T18:00:33Z")
check out [slideny.com](http://slideny.com) for drifting, if your into that. ---
**Author:** ![RocketPunch](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rocketpunch/32/6429_2.png) [@RocketPunch](https://forums.speedlife.net/u/RocketPunch)\ **Post date:** [March 11, 2012, 6:18pm UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/16 "2012-03-11T18:18:42Z")
> [@T-mo customers...](https://forums.speedlife.net/t/t-mo-customers/48599/19): > > i hoping i can get out this season…i got a car lined up just have to pick it up. plus i need to find out what tracks are around… Define around? How far are you willing to drive to a track? ---
**Author:** ![Fcukjdm](https://avatars.discourse-cdn.com/v4/letter/f/a9adbd/32.png) [@Fcukjdm](https://forums.speedlife.net/u/Fcukjdm)\ **Post date:** [March 11, 2012, 6:22pm UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/17 "2012-03-11T18:22:22Z")
> [@Lotto will kill you?](https://forums.speedlife.net/t/lotto-will-kill-you/48543/25): > > check out [slideny.com](http://slideny.com) for drifting, if your into that. i’ll be FF. no rear wheel yet … thats later down the road ---
**Author:** ![Fcukjdm](https://avatars.discourse-cdn.com/v4/letter/f/a9adbd/32.png) [@Fcukjdm](https://forums.speedlife.net/u/Fcukjdm)\ **Post date:** [March 11, 2012, 6:26pm UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/18 "2012-03-11T18:26:39Z")
> [@Another LS1 VS LT1](https://forums.speedlife.net/t/another-ls1-vs-lt1/48528/26): > > Define around? How far are you willing to drive to a track? i know there is lime rock,watkins,jersey,NH etc… im looking into more of speedventure, HFF challenge driving. Reason being i can have more of a street car and still drive the track vs having a full on racecar with i dont mine but thats wwwaaayyy down the road once i buy a house. far drives dont bother me to much 4 hrs max ---
**Author:** ![daknut93](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/daknut93/32/6743_2.png) [@daknut93](https://forums.speedlife.net/u/daknut93)\ **Post date:** [March 11, 2012, 6:57pm UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/19 "2012-03-11T18:57:40Z")
u got some nice knobs there… u do special orders ---
**Author:** ![Fcukjdm](https://avatars.discourse-cdn.com/v4/letter/f/a9adbd/32.png) [@Fcukjdm](https://forums.speedlife.net/u/Fcukjdm)\ **Post date:** [March 11, 2012, 7:07pm UTC](https://forums.speedlife.net/t/its-the-new-guy/262972/20 "2012-03-11T19:07:24Z")
> [@SOLD](https://forums.speedlife.net/t/sold/48602/2): > > u got some nice knobs there… u do special orders i do … [Next page](https://forums.speedlife.net/t/its-the-new-guy/262972.md?page=2)