# Jesus shit fucking christ...
**URL:** https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836
**Category:** SON240sx Automotive
**Created:** [September 7, 2009, 7:49pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836 "2009-09-07T19:49:35Z")
**Posts on this page:** 14
**Page:** 1
### Author:  [@S13counterpart](https://forums.speedlife.net/u/S13counterpart)
#### Post date: [September 7, 2009, 7:49pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836/1 "2009-09-07T19:49:35Z")
Ok I’m making a thread here… I’m fucking pissed.
I recently bought doggie Dog’s so called “30mm” aluminum Z32 calipers…
THEY"RE FUCKING 26MM!!!
I NEED 30MM FUCKING ASAP!!!
this is the second time I’ve been fucked by so called “30MM ALUMINUM CALIPERS”
I have BRAND FUCKING NEW ROTOR AND PADS FOR 30MM…
HELP ME THE FUCK OUT I NEED THESE ASAP!!!
---
### Author:  [@KA24Power](https://forums.speedlife.net/u/KA24Power)
#### Post date: [September 7, 2009, 7:50pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836/2 "2009-09-07T19:50:22Z")
I got 30mm irons if you want them.
PM me.
---
### Author:  [@CSK-240-R1](https://forums.speedlife.net/u/CSK-240-R1)
#### Post date: [September 7, 2009, 7:51pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836/3 "2009-09-07T19:51:29Z")
im gald i didnt go get them … i would be in the same boat as u… is he willing to give u ur money back ??
---
### Author:  [@S13counterpart](https://forums.speedlife.net/u/S13counterpart)
#### Post date: [September 7, 2009, 7:52pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836/4 "2009-09-07T19:52:48Z")
^Unless you’re willing to sell them dirt cheap and they are rebuilt I don’t want them… I’ve had enough of being fucked around with calipers and dealing with leaking fucking seals.
Also you’re in Waterloo… I don’t have time to be driving down there or waiting for shipping.
CSK 240… I don’t know I’ve called him numerous times already and he isn’t picking up his phone. And I’ve already PM’d him.
---
### Author:  [@KA24Power](https://forums.speedlife.net/u/KA24Power)
#### Post date: [September 7, 2009, 7:58pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836/5 "2009-09-07T19:58:54Z")
yeah they’re fresh rebuilt, I didn’t want to take any chances. But I don’t exactly want to sell cheap. If you decide you want them give me a shout, if not good luck finding a set!
---
### Author:  [@DudebuD](https://forums.speedlife.net/u/DudebuD)
#### Post date: [September 7, 2009, 8:00pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836/6 "2009-09-07T20:00:37Z")
some people could really use a ruler.
---
### Author:  [@CSK-240-R1](https://forums.speedlife.net/u/CSK-240-R1)
#### Post date: [September 7, 2009, 8:00pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836/7 "2009-09-07T20:00:53Z")
thats pretty poor… unless he honestly didnt know
will u be posting these back up forsale?
were they actually rebuilt?
---
### Author:  [@240xcsv](https://forums.speedlife.net/u/240xcsv)
#### Post date: [September 7, 2009, 8:32pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836/8 "2009-09-07T20:32:05Z")
Get taurus brakes
---
### Author:  [@S13counterpart](https://forums.speedlife.net/u/S13counterpart)
#### Post date: [September 7, 2009, 9:09pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836/9 "2009-09-07T21:09:25Z")
> [@CSK-240-R1"](#):
>
> thats pretty poor… unless he honestly didnt know
>
> will u be posting these back up forsale?
>
> were they actually rebuilt?
I don’t know what I’m doing with them yet… I’ve been contemplating having a machine shop make a 4-5 mm sandwich plate with a groove for an o-ring.
And after a good look at everything it’s all brand new hardware. New seals and pistons too…
---
### Author:  [@Lith](https://forums.speedlife.net/u/Lith)
#### Post date: [September 7, 2009, 9:09pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836/10 "2009-09-07T21:09:42Z")
I once got rebuilt 26mm calipers from Partsource, eventhough it was packaged and labeled as 30mm calipers (and of course I ordered the 30mm ones).
In any case, any time you buy 30mm calipers, take a ruler and measure the channel where the rotor sits. It should actually measure 35mm across. If it measures 30mm across, then it’s actually a 26mm.
---
### Author:  [@Cyprian](https://forums.speedlife.net/u/Cyprian)
#### Post date: [September 7, 2009, 9:09pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836/11 "2009-09-07T21:09:47Z")
That was so gay, having to take those beautiful blue calipers off and pound those irons back on. As for KA24power’s statement, he is currently running the 30mm irons. The a few of the seals are just starting to sweat, no leaks. but if you knew S13counterpart he does not settle for second best on his car, I could most likely rebuild his irons for less than you would let yours go for. Speaking of that,…shoot me a text if you want me to price out a kit from Nissan, hell I may even be able to get it for shop cost still lol.
---
### Author:  [@S13counterpart](https://forums.speedlife.net/u/S13counterpart)
#### Post date: [September 7, 2009, 9:24pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836/12 "2009-09-07T21:24:09Z")
> [@On another topic](https://forums.speedlife.net/t/23752/82):
>
> I once got rebuilt 26mm calipers from Partsource, eventhough it was packaged and labeled as 30mm calipers (and of course I ordered the 30mm ones).
> In any case, any time you buy 30mm calipers, take a ruler and measure the channel where the rotor sits. It should actually measure 35mm across. If it measures 30mm across, then it’s actually a 26mm.
I know. The seller seemed to know what he was talking about. I guess it’s my fault for actually trusting another enthusiast right? lol
> [@TW: 94 TEG](https://forums.speedlife.net/t/tw-94-teg/23716/35):
>
> That was so gay, having to take those beautiful blue calipers off and pound those irons back on. As for KA24power’s statement, he is currently running the 30mm irons. The a few of the seals are just starting to sweat, no leaks. but if you knew S13counterpart he does not settle for second best on his car, I could most likely rebuild his irons for less than you would let yours go for. Speaking of that,…shoot me a text if you want me to price out a kit from Nissan, hell I may even be able to get it for shop cost still lol.
I may do that if I sell these stupid 26mm’s.
Or, I’m just ordering an endless brakes kit…
---
### Author:  [@Cyprian](https://forums.speedlife.net/u/Cyprian)
#### Post date: [September 7, 2009, 9:58pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836/13 "2009-09-07T21:58:07Z")
Aww to hell with it, I will see if I can get those calipers too…and how much for
---
### Author:  [@jeff93eg](https://forums.speedlife.net/u/jeff93eg)
#### Post date: [September 8, 2009, 4:57pm UTC](https://forums.speedlife.net/t/jesus-shit-fucking-christ/127836/14 "2009-09-08T16:57:19Z")
> [@3000gt swap help?](https://forums.speedlife.net/t/3000gt-swap-help/23739/63):
>
> I know. The seller seemed to know what he was talking about. I guess it’s my fault for actually trusting another enthusiast right? lol
>
> I may do that if I sell these stupid 26mm’s.
>
> Or, I’m just ordering an endless brakes kit…
If you want i’ll consider selling my wilwoods to you.