# Jiggsy Built ..
**URL:** https://forums.speedlife.net/t/jiggsy-built/255228
**Category:** Shift518 Off Topic
**Created:** [October 25, 2010, 2:56pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228 "2010-10-25T14:56:21Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@DUKE\_LADUKE](https://forums.speedlife.net/u/DUKE_LADUKE)
#### Post date: [October 25, 2010, 2:56pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/1 "2010-10-25T14:56:21Z")
So As most of you known, my crank pulley fell of completly as I was making a turn in a parking lot due to jiggs not tightening the bolt down. Mind you , this bolt is huge and how that is not possible I do not know. He cost me 4 hours waiting for the AAA tow and calling out of work . On top of that 20 mins after the pulley fell off I had a Criminal Law Midterm to take.
```
Today ... I get a call from the person working on my body work that they timing belt is flapping around and was stalling while he was driving it . The belt was not tightened right, as the tensioner was pretty much barley doing anything at all. Now I have to pay someone to fix it right .
```
Another mistake when I brought my car to the dyno it was making less hp with the new cam set up. The reason why is because he bent a valve and ported it wrong. He knew all along before the tune that the valve might of been bent but did not say anything.This cost me money for a retune that was a failure and a head project that was ditched. That I am STILL paying off from months ago.
I would like to that joe jiggs for doing this shit work he has to my car… Pulley coming off,timing belt fuck up,bending a valve on my head setup etc.I had the pulley and the belt put on all about the same time. And they are now all breaking or something has gone wrong. I will never have this wannabe honda tech virgin faggot work on my car again.FUCK!
---
### Author:  [@johnnyk](https://forums.speedlife.net/u/johnnyk)
#### Post date: [October 25, 2010, 2:59pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/2 "2010-10-25T14:59:32Z")
damn sorry to hear about all this jeff
---
### Author:  [@ReDevil](https://forums.speedlife.net/u/ReDevil)
#### Post date: [October 25, 2010, 3:00pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/3 "2010-10-25T15:00:51Z")
Kid is pissed.
:popc:
---
### Author:  [@Yetti\_VR](https://forums.speedlife.net/u/Yetti_VR)
#### Post date: [October 25, 2010, 3:02pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/4 "2010-10-25T15:02:36Z")
just out of curiousity how much did you pay him to work on your car?
---
### Author:  [@DUKE\_LADUKE](https://forums.speedlife.net/u/DUKE_LADUKE)
#### Post date: [October 25, 2010, 3:03pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/5 "2010-10-25T15:03:45Z")
> [@winter car pics](https://forums.speedlife.net/t/winter-car-pics/36267/47):
>
> Kid is pissed.
>
> :popc:
Highly , if he knew what he was doing then I would not be going through this dilemma . I feel bad for other peoples shit that is done by him.That will be breaking or has been broken by him.
---
### Author:  [@DUKE\_LADUKE](https://forums.speedlife.net/u/DUKE_LADUKE)
#### Post date: [October 25, 2010, 3:04pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/6 "2010-10-25T15:04:09Z")
> [@Yetti VR"](#):
>
> just out of curiousity how much did you pay him to work on your car?
just for food and driving his ass around thank god
---
### Author:  [@Cossey](https://forums.speedlife.net/u/Cossey)
#### Post date: [October 25, 2010, 3:06pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/7 "2010-10-25T15:06:44Z")
> [@Yetti VR"](#):
>
> just out of curiousity how much did you pay him to work on your car?
+1.
You get what you pay for usually. A guy’s work can only he so good when you’re paying him in Dominos and Pepsi.
---
### Author:  [@DUKE\_LADUKE](https://forums.speedlife.net/u/DUKE_LADUKE)
#### Post date: [October 25, 2010, 3:08pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/8 "2010-10-25T15:08:12Z")
> [@Cossey"](#):
>
> +1.
> You get what you pay for usually. A guy’s work can only he so good when you’re paying him in Dominos and Pepsi.
Yea , learned that lesson the hard way . I stay away from the kid yet his previous work comes back to haunt me.
---
### Author:  [@Yetti\_VR](https://forums.speedlife.net/u/Yetti_VR)
#### Post date: [October 25, 2010, 3:12pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/9 "2010-10-25T15:12:45Z")
> [@Stripped Lug Nut! HELP ME GET THIS SUMMABITCH OFF](https://forums.speedlife.net/t/stripped-lug-nut-help-me-get-this-summabitch-off/36292/4):
>
> just for food and driving his ass around thank god
then i hate to tell ya its what ya get. i love having other people help on my car but there’s only a handfull i’d actually let turn wrenches. and less that can say they had a hand in building my car. and even them i check every nut and bolt so if something does go wrong its on me.
not trying to bash ya laduke just saying dont hate on free work. and pizza and beer dont count as payment. thats just good garage etiquette…
---
### Author:  [@DUKE\_LADUKE](https://forums.speedlife.net/u/DUKE_LADUKE)
#### Post date: [October 25, 2010, 3:16pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/10 "2010-10-25T15:16:22Z")
yea … thought I could trust him with his work since he has had some experience . But I think all of his shit is a ticking time bomb. Some day it will just snap and he wont take blame for it And that person will be stuck in the same position as i am in now.
---
### Author:  [@Mike3](https://forums.speedlife.net/u/Mike3)
#### Post date: [October 25, 2010, 3:17pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/11 "2010-10-25T15:17:56Z")
in for kramer’s response
---
### Author:  [@JVG](https://forums.speedlife.net/u/JVG)
#### Post date: [October 25, 2010, 3:26pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/12 "2010-10-25T15:26:45Z")
classic, you get what you pay for. Cheap asses take note. This is how short cuts end up
---
### Author:  [@Zack\_Lanahan](https://forums.speedlife.net/u/Zack_Lanahan)
#### Post date: [October 25, 2010, 3:27pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/13 "2010-10-25T15:27:13Z")
:wow
---
### Author:  [@LKSi](https://forums.speedlife.net/u/LKSi)
#### Post date: [October 25, 2010, 3:29pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/14 "2010-10-25T15:29:23Z")
> [@2012 C7 Corvette](https://forums.speedlife.net/t/2012-c7-corvette/36278/17):
>
> in for kramer’s response
+1, I think he will love this
---
### Author:  [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)
#### Post date: [October 25, 2010, 3:39pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/15 "2010-10-25T15:39:59Z")
this is why I do all the work on my car myself…
---
### Author:  [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)
#### Post date: [October 25, 2010, 3:41pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/16 "2010-10-25T15:41:31Z")
hmm
---
### Author:  [@xreaction](https://forums.speedlife.net/u/xreaction)
#### Post date: [October 25, 2010, 3:48pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/17 "2010-10-25T15:48:38Z")
Jiggs putting In werk as usual :lol
---
### Author:  [@iamderrik](https://forums.speedlife.net/u/iamderrik)
#### Post date: [October 25, 2010, 3:49pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/18 "2010-10-25T15:49:02Z")
> [@Vids: Voltron vs. Bladez, Firehawk853](https://forums.speedlife.net/t/vids-voltron-vs-bladez-firehawk853/36280/20):
>
> this is why I do all the work on my car myself…
Exactly. Sometimes its nice to have a helping hand tho
---
### Author:  [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)
#### Post date: [October 25, 2010, 3:53pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/19 "2010-10-25T15:53:24Z")
ummmm unfamiliar with your setup but aren’t those tensioners hydraulic and or spring tensioners??? not trying to be a dick, just curious.
i’ve never heard of a crank bolt coming loose on these, they usually get tighter. hmmm
feel free to pay me to fix it if you’d like.
---
### Author:  [@skateshelter](https://forums.speedlife.net/u/skateshelter)
#### Post date: [October 25, 2010, 4:08pm UTC](https://forums.speedlife.net/t/jiggsy-built/255228/20 "2010-10-25T16:08:12Z")
> [@Motion to add :burnout](https://forums.speedlife.net/t/motion-to-add-burnout/36283/7):
>
> So As most of you known, my crank pulley fell of completly as I was making a turn in a parking lot due to jiggs not tightening the bolt down. Mind you , this bolt is huge and how that is not possible I do not know. He cost me 4 hours waiting for the AAA tow and calling out of work . On top of that 20 mins after the pulley fell off I had a Criminal Law Midterm to take.
>
> ```
> Today ... I get a call from the person working on my body work that they timing belt is flapping around and was stalling while he was driving it . The belt was not tightened right, as the tensioner was pretty much barley doing anything at all. Now I have to pay someone to fix it right .
>
> ```
>
> Another mistake when I brought my car to the dyno it was making less hp with the new cam set up. The reason why is because he bent a valve and ported it wrong. He knew all along before the tune that the valve might of been bent but did not say anything.This cost me money for a retune that was a failure and a head project that was ditched. That I am STILL paying off from months ago.
>
> I would like to that joe jiggs for doing this shit work he has to my car… Pulley coming off,timing belt fuck up,bending a valve on my head setup etc.I had the pulley and the belt put on all about the same time. And they are now all breaking or something has gone wrong. I will never have this wannabe honda tech virgin faggot work on my car again.FUCK!
Wow sorry to hear bob…
[Next page](https://forums.speedlife.net/t/jiggsy-built/255228.md?page=2)