# Juniper Config? **URL:** \ **Category:** NYSpeed Off Topic\ **Created:** [October 27, 2008, 4:30pm UTC](https://forums.speedlife.net/t/juniper-config/57178 "2008-10-27T16:30:05Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [October 27, 2008, 4:30pm UTC](https://forums.speedlife.net/t/juniper-config/57178/1 "2008-10-27T16:30:05Z")
This is going to be a long shot… Anyone have a working config for a clear channel T3 for a juniper? or know where I can find an example…Juniper forums/google were no help. I setup a channelized T3 no issues…but can’t make the clear channel work… ---
**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\ **Post date:** [October 27, 2008, 4:31pm UTC](https://forums.speedlife.net/t/juniper-config/57178/2 "2008-10-27T16:31:57Z")
pay attention to the game ---
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [October 27, 2008, 4:35pm UTC](https://forums.speedlife.net/t/juniper-config/57178/3 "2008-10-27T16:35:30Z")
> [@turbo ls1 ss](#): > > pay attention to the game Im not at the game tonight ☹ ---
**Author:** ![fbrendan](https://avatars.discourse-cdn.com/v4/letter/f/d26b3c/32.png) [@fbrendan](https://forums.speedlife.net/u/fbrendan)\ **Post date:** [October 27, 2008, 4:35pm UTC](https://forums.speedlife.net/t/juniper-config/57178/4 "2008-10-27T16:35:58Z")
Why not? Party time then? ---
**Author:** ![boxxa](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boxxa/32/5045_2.png) [@boxxa](https://forums.speedlife.net/u/boxxa)\ **Post date:** [October 28, 2008, 6:31am UTC](https://forums.speedlife.net/t/juniper-config/57178/5 "2008-10-28T06:31:42Z")
is this a point to point t3 between two juniper routers or is this one from the provider to you? ---
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [October 28, 2008, 6:59am UTC](https://forums.speedlife.net/t/juniper-config/57178/6 "2008-10-28T06:59:59Z")
Its a point to point between a Juniper(M20) and a Sangoma t3 card…I have control of both… I have configured channelized T3s on the Juniper with no issue going out to a Sangoma T1 card…I just can’t get the unchannelized to work…I get a physical link just no PPP…and a bunch of framing errors so obviously i am missing something… Kinda looking for an example config… Juniper is doing the clocking…and the link is PPP…hell I would even use HDLC at this point… ---
**Author:** ![boxxa](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boxxa/32/5045_2.png) [@boxxa](https://forums.speedlife.net/u/boxxa)\ **Post date:** [October 28, 2008, 7:20am UTC](https://forums.speedlife.net/t/juniper-config/57178/7 "2008-10-28T07:20:24Z")
Hmm…ill look around through my docs. So you have a T3 you are breaking up into t1’s? And I have to ask…T3 meaning a 44mb circuit or 3 T1’s? ---
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [October 28, 2008, 7:23am UTC](https://forums.speedlife.net/t/juniper-config/57178/8 "2008-10-28T07:23:54Z")
What im trying to accomplish is a Point to Point over a full T3(44mb)…not bonded T1s… I actually might have just found the issue…FreeBSD and IRQ issues with the Sangoma card… ---
**Author:** ![boxxa](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boxxa/32/5045_2.png) [@boxxa](https://forums.speedlife.net/u/boxxa)\ **Post date:** [October 28, 2008, 8:03am UTC](https://forums.speedlife.net/t/juniper-config/57178/9 "2008-10-28T08:03:50Z")
Ya juniper to juniper is so simple to setup Ts between that its almost plug and play. That card might be goofy. ---
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [October 28, 2008, 8:08am UTC](https://forums.speedlife.net/t/juniper-config/57178/10 "2008-10-28T08:08:41Z")
Even the Juniper with channelized T3 card to a -\> sangoma T1 card setup wasn’t that bad to setup… ---
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [November 24, 2008, 11:11am UTC](https://forums.speedlife.net/t/juniper-config/57178/11 "2008-11-24T11:11:10Z")
Update…I kinda of have this working it does 6megs :lol: