# Junk Sale!
**URL:** https://forums.speedlife.net/t/junk-sale/206944
**Category:** Vendor Marketplace
**Created:** [December 7, 2010, 9:43am UTC](https://forums.speedlife.net/t/junk-sale/206944 "2010-12-07T09:43:59Z")
**Posts on this page:** 18
**Page:** 1
### Author:  [@dezod](https://forums.speedlife.net/u/dezod)
#### Post date: [December 7, 2010, 9:43am UTC](https://forums.speedlife.net/t/junk-sale/206944/1 "2010-12-07T09:43:59Z")
I have tons of random goods that need to fly. More to be added to the ever expanding list of randomness. :tspry:
Check them out. Something for everyone.
[http://www.dezod.com/cat\_inventory.cfm](http://www.dezod.com/cat_inventory.cfm)
[http://www.dezod.com/cat\_garage.cfm](http://www.dezod.com/cat_garage.cfm)
[http://www.dezod.com/on\_sale.cfm](http://www.dezod.com/on_sale.cfm)
---
### Author:  [@yunvme666](https://forums.speedlife.net/u/yunvme666)
#### Post date: [December 7, 2010, 12:06pm UTC](https://forums.speedlife.net/t/junk-sale/206944/2 "2010-12-07T12:06:51Z")
i see the blank fuel rail, but do you guys have the bit to drill the holes by chance? if so how much to pop 4 holes in it?
---
### Author:  [@dezod](https://forums.speedlife.net/u/dezod)
#### Post date: [December 7, 2010, 12:47pm UTC](https://forums.speedlife.net/t/junk-sale/206944/3 "2010-12-07T12:47:41Z")
> [@yunvme666](#):
>
> i see the blank fuel rail, but do you guys have the bit to drill the holes by chance? if so how much to pop 4 holes in it?
Yes I do have it. I would recommend taking it to a machinist to have it done.
---
### Author:  [@yunvme666](https://forums.speedlife.net/u/yunvme666)
#### Post date: [December 7, 2010, 1:19pm UTC](https://forums.speedlife.net/t/junk-sale/206944/4 "2010-12-07T13:19:21Z")
you guys dont do it there? i got a drill press and mill attachment, im pretty sure i can do it i just would need to maybe rent the bit if possible? i could get it back in a day or two…
---
### Author:  [@dezod](https://forums.speedlife.net/u/dezod)
#### Post date: [December 7, 2010, 1:47pm UTC](https://forums.speedlife.net/t/junk-sale/206944/5 "2010-12-07T13:47:10Z")
> [@yunvme666](#):
>
> you guys dont do it there? i got a drill press and mill attachment, im pretty sure i can do it i just would need to maybe rent the bit if possible? i could get it back in a day or two…
We CAN, but I would rather not for various reasons. We have a super nice drill press…Just don’t want to get into it.
PM sent
---
### Author:  [@dezod](https://forums.speedlife.net/u/dezod)
#### Post date: [December 13, 2010, 11:17am UTC](https://forums.speedlife.net/t/junk-sale/206944/6 "2010-12-13T11:17:20Z")
Still have plenty of widgets for sale…cheap!
---
### Author:  [@dezod](https://forums.speedlife.net/u/dezod)
#### Post date: [December 15, 2010, 10:05am UTC](https://forums.speedlife.net/t/junk-sale/206944/7 "2010-12-15T10:05:42Z")
list updated!
---
### Author:  [@yunvme666](https://forums.speedlife.net/u/yunvme666)
#### Post date: [December 15, 2010, 9:54pm UTC](https://forums.speedlife.net/t/junk-sale/206944/8 "2010-12-15T21:54:17Z")
nevermind, i was thinking 6an was bigger…lol…
---
### Author:  [@dezod](https://forums.speedlife.net/u/dezod)
#### Post date: [December 16, 2010, 6:47am UTC](https://forums.speedlife.net/t/junk-sale/206944/9 "2010-12-16T06:47:54Z")
> [@yunvme666](#):
>
> nevermind, i was thinking 6an was bigger…lol…
6AN is the average size of most aftermarket return fuel kits. It will support great power. It’s your call. For how cheap it is, you can’t complain.
---
### Author:  [@yunvme666](https://forums.speedlife.net/u/yunvme666)
#### Post date: [December 16, 2010, 9:32am UTC](https://forums.speedlife.net/t/junk-sale/206944/10 "2010-12-16T09:32:01Z")
ya what ever ill try it i guess , when are you open? ill use it as something to start with, maybe ill make a few later on in 10an…
---
### Author:  [@dezod](https://forums.speedlife.net/u/dezod)
#### Post date: [December 16, 2010, 9:38am UTC](https://forums.speedlife.net/t/junk-sale/206944/11 "2010-12-16T09:38:27Z")
> [@yunvme666](#):
>
> ya what ever ill try it i guess , when are you open? ill use it as something to start with, maybe ill make a few later on in 10an…
Today until 5:30, then Mon 9:30-5:30. I can meet you early tomorrow as well. Let me know.
---
### Author:  [@yunvme666](https://forums.speedlife.net/u/yunvme666)
#### Post date: [December 16, 2010, 10:20am UTC](https://forums.speedlife.net/t/junk-sale/206944/12 "2010-12-16T10:20:18Z")
sounds good im bored ill be out… says erie street on the site right?
---
### Author:  [@dezod](https://forums.speedlife.net/u/dezod)
#### Post date: [December 16, 2010, 10:51am UTC](https://forums.speedlife.net/t/junk-sale/206944/13 "2010-12-16T10:51:45Z")
Yes, correct. I am going to grab lunch real quick. So if you arrive here in that 10-15 minute window, just hang out.
---------- Post added at 01:51 PM ---------- Previous post was at 01:30 PM ----------
I’m back…You’re all set
---
### Author:  [@dezod](https://forums.speedlife.net/u/dezod)
#### Post date: [December 21, 2010, 12:12pm UTC](https://forums.speedlife.net/t/junk-sale/206944/14 "2010-12-21T12:12:32Z")
Lists updated
---
### Author:  [@yunvme666](https://forums.speedlife.net/u/yunvme666)
#### Post date: [December 21, 2010, 9:26pm UTC](https://forums.speedlife.net/t/junk-sale/206944/15 "2010-12-21T21:26:57Z")
hey so about renting that bit…lol… what size is it the one for 11mm or 14mm? im thinking about just buying one , but maybe after i make this rail atleast…lol… unless you just want to sell me that one if you dont use it anymore?
---
### Author:  [@dezod](https://forums.speedlife.net/u/dezod)
#### Post date: [December 22, 2010, 6:44am UTC](https://forums.speedlife.net/t/junk-sale/206944/16 "2010-12-22T06:44:17Z")
> [@yunvme666](#):
>
> hey so about renting that bit…lol… what size is it the one for 11mm or 14mm? im thinking about just buying one , but maybe after i make this rail atleast…lol… unless you just want to sell me that one if you dont use it anymore?
14mm tool. I have use for it still.
---
### Author:  [@yunvme666](https://forums.speedlife.net/u/yunvme666)
#### Post date: [December 22, 2010, 9:56am UTC](https://forums.speedlife.net/t/junk-sale/206944/17 "2010-12-22T09:56:10Z")
oh shitty, nevermind then i guess, i need the 11mm bit… im probably just gonna order some off snapon, atleast i get a warranty from them, and i should probably keep my account going… thanks tho…
---
### Author:  [@Carnut](https://forums.speedlife.net/u/Carnut)
#### Post date: [December 22, 2010, 6:19pm UTC](https://forums.speedlife.net/t/junk-sale/206944/18 "2010-12-22T18:19:25Z")
The bit paul has is a 11mm bit. Fits denso style injectors. IIRC
You can buy them here as well.
[http://www.rossmachineracing.com/injectortool11mm.html](http://www.rossmachineracing.com/injectortool11mm.html)