# Just installed my Stance coils from bing!
**URL:** https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598
**Category:** SON240sx Automotive
**Created:** [July 11, 2007, 9:47am UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598 "2007-07-11T09:47:24Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@logik23](https://forums.speedlife.net/u/logik23)
#### Post date: [July 11, 2007, 9:47am UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/1 "2007-07-11T09:47:24Z")
Mods are…
Stance GR+ Pro coilovers
Bings.ca TC rods
Whiteline polyurethane bushing in front control arm
30mm Z32 front brakes
R32 rear 5 lug
Ichiba front 5 lug
16x8+13 front Volk Racing Queen II
16x9 +13 rear Volk Racing Queen II
225/50ZR16 Hankook R-S2 Z212 all around
The rear is usually raised about 1/4 inch since there’s a heavy ass box in the trunk and all my tools.
Baseball bat fender roll ftw!
---
### Author:  [@Lucidsnow](https://forums.speedlife.net/u/Lucidsnow)
#### Post date: [July 11, 2007, 10:08am UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/2 "2007-07-11T10:08:28Z")
very nice 🙂 especially choosing decent offset rims not just quality
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [July 11, 2007, 10:27am UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/3 "2007-07-11T10:27:50Z")
i cant beleive they got the coils to you overnight… i didnt even ask for express… which begs the question… had i shipped express… would you have had them in like 4 hours?
---
### Author:  [@logik23](https://forums.speedlife.net/u/logik23)
#### Post date: [July 11, 2007, 10:43am UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/4 "2007-07-11T10:43:10Z")
> [@So. My sister just brought over her boyfriend, and his friends...](https://forums.speedlife.net/t/so-my-sister-just-brought-over-her-boyfriend-and-his-friends/13242/3):
>
> i cant beleive they got the coils to you overnight… i didnt even ask for express… which begs the question… had i shipped express… would you have had them in like 4 hours?
The delivery guy came by around 11am yesterday (Tuesday) lol, I installed them in the afternoon. Fast service for sure!
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [July 11, 2007, 10:45am UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/5 "2007-07-11T10:45:00Z")
I just put a set of Stance in myself… i like i like.
---
### Author:  [@Fobwall](https://forums.speedlife.net/u/Fobwall)
#### Post date: [July 11, 2007, 11:21am UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/6 "2007-07-11T11:21:20Z")
Jon, that’s a hot car! But let us know how the coilovers perform. I’ve seen a lot of slammed cars. 🙂
---
### Author:  [@logik23](https://forums.speedlife.net/u/logik23)
#### Post date: [July 11, 2007, 11:26am UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/7 "2007-07-11T11:26:48Z")
Well I’m ganna break them in more, I just drove around 50km on them. And I need to fix all the rubbing issues. lol Rear doesn’t rub at all, even over big bumps, but the front is rub city as soon as I turn the wheel or go over bumps.
---
### Author:  [@a\_ahmed](https://forums.speedlife.net/u/a_ahmed)
#### Post date: [July 11, 2007, 12:20pm UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/8 "2007-07-11T12:20:59Z")
Looks fantastic. What did you have previously? How does it feel now (handling, dampening, ride comfort, etc…).
Awesome car.
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [July 11, 2007, 12:23pm UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/9 "2007-07-11T12:23:04Z")
Make sure you hammer up the seam above the front wheels in the fender-well area.
also, you need to relocate your wiring harness on the drivers side. you can lift it up and hold it with zipties tight to the top of the fender or you can really pull it out and tuck it between the fender rail and the inner fender above the wheel.
if you dont do either of these things, being that low, you are going to cut your tires on the metal seam and melt your harness causing significant electrical issues.
---
### Author:  [@Lith](https://forums.speedlife.net/u/Lith)
#### Post date: [July 11, 2007, 12:47pm UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/10 "2007-07-11T12:47:14Z")
make sure you get a proper alignment done after you find the front/rear height you like. Otherwise the car will feel odd and you’ll probably waste those tires a lot sooner than expected. I don’t think you’ll be able to do anything with the camber in the back though… unless you have the RUCA’s and the toe links.
---
### Author:  [@logik23](https://forums.speedlife.net/u/logik23)
#### Post date: [July 11, 2007, 1:07pm UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/11 "2007-07-11T13:07:04Z")
> [@Evo \> Choda](https://forums.speedlife.net/t/evo-choda/13198/70):
>
> Looks fantastic. What did you have previously? How does it feel now (handling, dampening, ride comfort, etc…).
>
> Awesome car.
Thx! Before I had 16x7 +35 4 bolt Rotas with the same tires I have now and Kei Office coilovers, but they blew out, which is why I switched to Stance. Never again will I buy used coils. lol
> [@On another topic](https://forums.speedlife.net/t/13210/34):
>
> Make sure you hammer up the seam above the front wheels in the fender-well area.
>
> also, you need to relocate your wiring harness on the drivers side. you can lift it up and hold it with zipties tight to the top of the fender or you can really pull it out and tuck it between the fender rail and the inner fender above the wheel.
>
> if you dont do either of these things, being that low, you are going to cut your tires on the metal seam and melt your harness causing significant electrical issues.
I’m actually goign to do all the necessary tweaks in the front before I drive it any more. I just had to get home last night which is why I drove it the way it was. I heard it rub everytime I went over any little bump and smelled burned rubber sometimes. lol
> [@So. My sister just brought over her boyfriend, and his friends...](https://forums.speedlife.net/t/so-my-sister-just-brought-over-her-boyfriend-and-his-friends/13242/22):
>
> make sure you get a proper alignment done after you find the front/rear height you like. Otherwise the car will feel odd and you’ll probably waste those tires a lot sooner than expected. I don’t think you’ll be able to do anything with the camber in the back though… unless you have the RUCA’s and the toe links.
I will! 🙂
---
### Author:  [@Lith](https://forums.speedlife.net/u/Lith)
#### Post date: [July 11, 2007, 4:28pm UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/12 "2007-07-11T16:28:57Z")
btw, what lug nuts do you have? 🙂
I had a set of Rays Engineering lug nuts and they didn’t fit my Volk Racing wheels (which is weird, considering it’s all the same company).
---
### Author:  [@duckJAI](https://forums.speedlife.net/u/duckJAI)
#### Post date: [July 11, 2007, 4:37pm UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/13 "2007-07-11T16:37:32Z")
i think you pushed me to the edge, to make me stop procrastinating and lower my car and roll the fender.
BAT rolling FTMFW!!!
looks good, finally some “slammed” cars on SON are showing up more and more
nice rims too, awesome sizing on the rears, i’m feeling the dish.
too bad they arn’t 17s, you could go even lower then lol
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [July 11, 2007, 6:05pm UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/14 "2007-07-11T18:05:24Z")
after further inspection… raise the back up an inch or 3/4 of an inch.
---
### Author:  [@logik23](https://forums.speedlife.net/u/logik23)
#### Post date: [July 11, 2007, 6:29pm UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/15 "2007-07-11T18:29:00Z")
> [@July 22,23 NYSpeed @ NOPI New York](https://forums.speedlife.net/t/july-22-23-nyspeed-nopi-new-york/11913/67):
>
> btw, what lug nuts do you have? 🙂
> I had a set of Rays Engineering lug nuts and they didn’t fit my Volk Racing wheels (which is weird, considering it’s all the same company).
I got Muteki closed end spline drive nuts. They were like 35$US shipped on eBay and I wasn’t charged for customs.
> [@FS: \`97 Ford Explorer XLT](https://forums.speedlife.net/t/fs-97-ford-explorer-xlt/13094/12):
>
> i think you pushed me to the edge, to make me stop procrastinating and lower my car and roll the fender.
>
> BAT rolling FTMFW!!!
>
> looks good, finally some “slammed” cars on SON are showing up more and more
>
> nice rims too, awesome sizing on the rears, i’m feeling the dish.
>
> too bad they arn’t 17s, you could go even lower then lol
Dooooo iittttttt and 17" tires are to expensive. lol
> [@On another topic](https://forums.speedlife.net/t/8661/345):
>
> after further inspection… raise the back up an inch or 3/4 of an inch.
Like I said, the rear should be about 1/4-1/2 inch higher, but the trunk was full of heavy crap when I took the pics. It’s true that right now the back looks to low compared to the front.
---
### Author:  [@lewtz](https://forums.speedlife.net/u/lewtz)
#### Post date: [July 11, 2007, 8:05pm UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/16 "2007-07-11T20:05:18Z")
looks dope
like samson said, bat roll ftw
---
### Author:  [@Fobwall](https://forums.speedlife.net/u/Fobwall)
#### Post date: [July 11, 2007, 8:22pm UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/17 "2007-07-11T20:22:10Z")
Yes. Make sure you relocate the harness or at least push it up and then zip tie it. Also make sure to hammer that piece of metal that faces down toward your tire. If you don’t do that. This is what will happen to your harness:
I had the weirdest problems when my harness was being eaten up alive. I didn’t even realize it was the harness untill I saw smoke coming from my fenders one rainy day…
---
### Author:  [@Head](https://forums.speedlife.net/u/Head)
#### Post date: [July 12, 2007, 6:34am UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/18 "2007-07-12T06:34:36Z")
Hot wheels! Good look for a hatch
---
### Author:  [@DarkForceJackal](https://forums.speedlife.net/u/DarkForceJackal)
#### Post date: [July 12, 2007, 6:52am UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/19 "2007-07-12T06:52:57Z")
> [@Fobwall"](#):
>
> Yes. Make sure you relocate the harness or at least push it up and then zip tie it. Also make sure to hammer that piece of metal that faces down toward your tire. If you don’t do that. This is what will happen to your harness:
>
> I had the weirdest problems when my harness was being eaten up alive. I didn’t even realize it was the harness untill I saw smoke coming from my fenders one rainy day…
Oh crap!
Bad situation!
Real nice look logik23 BTW…
---
### Author:  [@lovemys14](https://forums.speedlife.net/u/lovemys14)
#### Post date: [July 12, 2007, 7:30pm UTC](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598/20 "2007-07-12T19:30:46Z")
your car is fu\*kin beautiful
[Next page](https://forums.speedlife.net/t/just-installed-my-stance-coils-from-bing/107598.md?page=2)