# JVD's "GET YOUR ROLL ON" Wheel EXTRAVAGANZA!!! **URL:** \ **Category:** Classifieds\ **Created:** [April 6, 2007, 10:08am UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273 "2007-04-06T10:08:50Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![JVD](https://avatars.discourse-cdn.com/v4/letter/j/7feea3/32.png) [@JVD](https://forums.speedlife.net/u/JVD)\ **Post date:** [April 6, 2007, 10:08am UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/1 "2007-04-06T10:08:50Z")
I figure it’s time to clear out all of my wheels. I really want a new set of 18’s for my car. Here’s what I’ve got. —(4)18 x 9 +25 Volk CV Euro - $1000 no tires(will throw in a pair of 225/40/18 to burn off)— ![http://img341.imageshack.us/img341/5884/img0677rh3.jpg](http://img341.imageshack.us/img341/5884/img0677rh3.jpg) ![http://img338.imageshack.us/img338/4003/img0687vd7.jpg](http://img338.imageshack.us/img338/4003/img0687vd7.jpg) RIP s14 —(2)17 x 8 +24 and (2)17 x 9+24 Stich Mesh - $1400 with 215/40/17 Falken ST-115 and 235/40/17 Ventus K102. All tires are good. ![http://img407.imageshack.us/img407/5645/siderv7.jpg](http://img407.imageshack.us/img407/5645/siderv7.jpg) ![http://img170.imageshack.us/img170/6053/fwheelyf2.jpg](http://img170.imageshack.us/img170/6053/fwheelyf2.jpg) ![http://img237.imageshack.us/img237/6361/180sx0003zh0.jpg](http://img237.imageshack.us/img237/6361/180sx0003zh0.jpg) —(2)17 x 9.5 +18 and (2)17 x 10 +18 NEW Enkei RPF1 in Super Brilliant Coating - $1800 with NEW 235/40/17 Falken FK-452’s on the 9.5’s. ![http://img182.imageshack.us/img182/998/p9271081hq0.jpg](http://img182.imageshack.us/img182/998/p9271081hq0.jpg) so hot they will make your momma wet ahah Located in Edmonton. PM me with any interest Jordan. ---
**Author:** ![mrsynister](https://avatars.discourse-cdn.com/v4/letter/m/858c86/32.png) [@mrsynister](https://forums.speedlife.net/u/mrsynister)\ **Post date:** [April 6, 2007, 12:22pm UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/2 "2007-04-06T12:22:58Z")
free bump for some dirty rims!!! ---
**Author:** ![imported\_240sx\_drift](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_240sx_drift/32/5585_2.png) [@imported\_240sx\_drift](https://forums.speedlife.net/u/imported_240sx_drift)\ **Post date:** [April 6, 2007, 1:19pm UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/3 "2007-04-06T13:19:14Z")
free bump for a sick s13 ---
**Author:** ![JVD](https://avatars.discourse-cdn.com/v4/letter/j/7feea3/32.png) [@JVD](https://forums.speedlife.net/u/JVD)\ **Post date:** [April 6, 2007, 2:14pm UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/4 "2007-04-06T14:14:14Z")
Thanks guys! Forgot to mention PCD. The Volk and Enkei’s are 5 x 114.3. The Stich wheels are both 4 and 5 x 114.3. Perfect for you 4-lug guys! Jordan. ---
**Author:** ![Silvia\_Drift](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/silvia_drift/32/5271_2.png) [@Silvia\_Drift](https://forums.speedlife.net/u/Silvia_Drift)\ **Post date:** [April 6, 2007, 3:23pm UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/5 "2007-04-06T15:23:51Z")
I’m interested in the stitch mesh, where are you located? Edit: my bad, I just read that you’re in Edmonton. Do you know approximately how much shipping would be to Mississauga Ontario (near Toronto)? ---
**Author:** ![njd07](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@njd07](https://forums.speedlife.net/u/njd07)\ **Post date:** [April 6, 2007, 3:26pm UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/6 "2007-04-06T15:26:14Z")
just ship them using greyhound…gonna be the cheapest method by far. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [April 6, 2007, 5:13pm UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/7 "2007-04-06T17:13:48Z")
gawd i hate greyhound… i had something shipped from Edmonton by greyhound and it was both expensive and inconvenient. for the used wheels with tires just put a couple sheets of thick cardboard over the front and rear face and then pallet wrap them really god. for the new wheels you should have proper boxes already. ship with Canada Post … they will be under $30 per wheel for sure with tracking and insurance. i think mine were $25 a wheel or something to winnipeg… but it depends on weight too…i also have an account with them. fucking greyhoudn makes you go to the dirty bus station to pick the stuff up… CP takes it right to your door step. and i want those RPF’s so bad ---
**Author:** ![JVD](https://avatars.discourse-cdn.com/v4/letter/j/7feea3/32.png) [@JVD](https://forums.speedlife.net/u/JVD)\ **Post date:** [April 6, 2007, 8:28pm UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/8 "2007-04-06T20:28:58Z")
> [@Sell me on a new car.](https://forums.speedlife.net/t/sell-me-on-a-new-car/12014/14): > > I’m interested in the stitch mesh, where are you located? > > Edit: my bad, I just read that you’re in Edmonton. Do you know approximately how much shipping would be to Mississauga Ontario (near Toronto)? Bing seems to have taken care of that. PM me if you’re still interested. Jordan. ---
**Author:** ![Polar\_s13](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/polar_s13/32/5572_2.png) [@Polar\_s13](https://forums.speedlife.net/u/Polar_s13)\ **Post date:** [April 7, 2007, 11:44pm UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/9 "2007-04-07T23:44:55Z")
What rear bumpers is that on the silver s13? ---
**Author:** ![AJ1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aj1/32/5580_2.png) [@AJ1](https://forums.speedlife.net/u/AJ1)\ **Post date:** [April 8, 2007, 6:23am UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/10 "2007-04-08T06:23:34Z")
Bump for some insanely Baller Rims =P ---
**Author:** ![jdm4eva](https://avatars.discourse-cdn.com/v4/letter/j/839c29/32.png) [@jdm4eva](https://forums.speedlife.net/u/jdm4eva)\ **Post date:** [April 8, 2007, 7:33am UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/11 "2007-04-08T07:33:14Z")
Those RPF1’s are soooo friggin dope…Damn I need to get some cash to buy your rims homeboy ---
**Author:** ![JVD](https://avatars.discourse-cdn.com/v4/letter/j/7feea3/32.png) [@JVD](https://forums.speedlife.net/u/JVD)\ **Post date:** [April 8, 2007, 8:59am UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/12 "2007-04-08T08:59:25Z")
> [@Hello](https://forums.speedlife.net/t/hello/11939/9): > > What rear bumpers is that on the silver s13? Some sort of Vertex variant. ---
**Author:** ![a\_ahmed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/a_ahmed/32/5411_2.png) [@a\_ahmed](https://forums.speedlife.net/u/a_ahmed)\ **Post date:** [April 8, 2007, 9:20am UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/13 "2007-04-08T09:20:20Z")
Man those rims would look sick on my silver s13 hatch… And yeah that silver hatch is awesome. I am looking for some 17x9 +10 or +12 rims front and rear though… ---
**Author:** ![JVD](https://avatars.discourse-cdn.com/v4/letter/j/7feea3/32.png) [@JVD](https://forums.speedlife.net/u/JVD)\ **Post date:** [April 9, 2007, 10:06am UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/14 "2007-04-09T10:06:03Z")
Enkei’s are SOLD! Lots of interest in the Stich. ---
**Author:** ![owen\_v8litew8](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/owen_v8litew8/32/5630_2.png) [@owen\_v8litew8](https://forums.speedlife.net/u/owen_v8litew8)\ **Post date:** [April 10, 2007, 10:46am UTC](https://forums.speedlife.net/t/jvds-get-your-roll-on-wheel-extravaganza/105273/15 "2007-04-10T10:46:57Z")
nice wheels! never seen those Euro-CVs before, kinda cool, cleeeeean. oh man the rpf1 are sickness all polished like that, sbc rules. glws 🙂