# JW Ultra Bell install under way TH-400

**URL:** https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862
**Category:** PittSpeed Automotive
**Created:** [December 15, 2005, 6:30am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862 "2005-12-15T06:30:54Z")
**Posts on this page:** 20
**Page:** 1

<div class="post-metadata">

### Author: ![MONTE\_SS](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@MONTE\_SS](https://forums.speedlife.net/u/MONTE_SS)
#### Post date: [December 15, 2005, 6:30am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/1 "2005-12-15T06:30:54Z")

</div>

Just a little more minor trimming to make the Bell fit, First pic, look at the bottom, broke 4 out 6 mounting holes. I also will have a brace plate to stop some of the twist. Hope this helps.

![http://www.pittspeed.com/uploaded/MVC-011F.JPG](http://www.pittspeed.com/uploaded/MVC-011F.JPG)  
 ![http://www.pittspeed.com/uploaded/MVC-009F.JPG](http://www.pittspeed.com/uploaded/MVC-009F.JPG)

---

<div class="post-metadata">

### Author: ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [December 15, 2005, 7:03am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/2 "2005-12-15T07:03:15Z")

</div>

wow,how did u do that?

---

<div class="post-metadata">

### Author: ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)
#### Post date: [December 15, 2005, 7:07am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/3 "2005-12-15T07:07:02Z")

</div>

> [@PewterSS](#):
>
> wow,how did u do that?

X2  
that is what i was wondering

---

<div class="post-metadata">

### Author: ![MONTE\_SS](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@MONTE\_SS](https://forums.speedlife.net/u/MONTE_SS)
#### Post date: [December 15, 2005, 7:16am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/4 "2005-12-15T07:16:09Z")

</div>

2nd run down the track pulled wheels 1.5 ft up 12ft out before I got off of it, I dont know if the intial TQ caused this, or what, I ran those GN mounts rated 1600hp, I think that might have been the Problem, was thinking of going solid, but I really dont want ever part of the car rattleing.

---

<div class="post-metadata">

### Author: ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)
#### Post date: [December 15, 2005, 7:16am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/5 "2005-12-15T07:16:14Z")

</div>

i have one like that. my driveshaft twisted in the middle and broke causing all hell to break loose

---

<div class="post-metadata">

### Author: ![MONTE\_SS](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@MONTE\_SS](https://forums.speedlife.net/u/MONTE_SS)
#### Post date: [December 15, 2005, 7:22am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/6 "2005-12-15T07:22:59Z")

</div>

I have a alum shaft, but some ppl scraed me to go back to steel, tell me that would happen.

---

<div class="post-metadata">

### Author: ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [December 15, 2005, 7:43am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/7 "2005-12-15T07:43:40Z")

</div>

did u leave off all at once or lighty?

---

<div class="post-metadata">

### Author: ![MONTE\_SS](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@MONTE\_SS](https://forums.speedlife.net/u/MONTE_SS)
#### Post date: [December 15, 2005, 7:49am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/8 "2005-12-15T07:49:04Z")

</div>

all at once trans brake 7500 rpm launch

---

<div class="post-metadata">

### Author: ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [December 15, 2005, 7:51am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/9 "2005-12-15T07:51:28Z")

</div>

> [@montekass](#):
>
> all at once trans brake 7500 rpm launch

i mean when ur wheels where up!

---

<div class="post-metadata">

### Author: ![MONTE\_SS](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@MONTE\_SS](https://forums.speedlife.net/u/MONTE_SS)
#### Post date: [December 15, 2005, 7:57am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/10 "2005-12-15T07:57:12Z")

</div>

I brought it up to 7500 and let down to 47-49ish, and went to 6500 and thats when I let off, peak power is at 7600.

---

<div class="post-metadata">

### Author: ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)
#### Post date: [December 15, 2005, 10:27am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/11 "2005-12-15T10:27:04Z")

</div>

7500rpm launch and only 1.5’ in air 😕

---

<div class="post-metadata">

### Author: ![MONTE\_SS](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@MONTE\_SS](https://forums.speedlife.net/u/MONTE_SS)
#### Post date: [December 15, 2005, 11:10am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/12 "2005-12-15T11:10:51Z")

</div>

Sorry, should have said reved, to 7500, brought it down to 45ish at which I launched, then and went to 6500 and thats when I let off, bringing the front down hard.

---

<div class="post-metadata">

### Author: ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [December 15, 2005, 12:30pm UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/13 "2005-12-15T12:30:53Z")

</div>

> [@montekass](#):
>
> Sorry, should have said reved, to 7500, brought it down to 45ish at which I launched, then and went to 6500 and thats when I let off, bringing the front down hard.

what im saying is,wheels up u lift off the gas ez so it dont hit hard! 🙂

---

<div class="post-metadata">

### Author: ![MONTE\_SS](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@MONTE\_SS](https://forums.speedlife.net/u/MONTE_SS)
#### Post date: [December 15, 2005, 12:46pm UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/14 "2005-12-15T12:46:30Z")

</div>

So kinda feather it till I come down, wont I lose accelrator time, ??? I guess would save the front end, or wheely bars to keep it down all togethre? thoughts?

---

<div class="post-metadata">

### Author: ![A468Bu](https://avatars.discourse-cdn.com/v4/letter/a/278dde/32.png) [@A468Bu](https://forums.speedlife.net/u/A468Bu)
#### Post date: [December 15, 2005, 2:51pm UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/15 "2005-12-15T14:51:13Z")

</div>

What kinda car is this? I run solid motor mount and a poly trans mount. No problems here. Over 1,000 trans brake launches so far

---

<div class="post-metadata">

### Author: ![MONTE\_SS](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@MONTE\_SS](https://forums.speedlife.net/u/MONTE_SS)
#### Post date: [December 16, 2005, 4:54am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/16 "2005-12-16T04:54:30Z")

</div>

85 ss

---

<div class="post-metadata">

### Author: ![A468Bu](https://avatars.discourse-cdn.com/v4/letter/a/278dde/32.png) [@A468Bu](https://forums.speedlife.net/u/A468Bu)
#### Post date: [December 16, 2005, 5:23am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/17 "2005-12-16T05:23:09Z")

</div>

> [@montekass](#):
>
> 85 ss

Whats in it?

---

<div class="post-metadata">

### Author: ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)
#### Post date: [December 16, 2005, 5:25am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/18 "2005-12-16T05:25:43Z")

</div>

> [@A468Bu](#):
>
> Whats in it?

1985 monte carlo SS :doh:

---

<div class="post-metadata">

### Author: ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [December 16, 2005, 5:46am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/19 "2005-12-16T05:46:52Z")

</div>

> [@eurodad](#):
>
> 1985 monte carlo SS :doh:

motor jack off :doh:

---

<div class="post-metadata">

### Author: ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [December 16, 2005, 6:26am UTC](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862/20 "2005-12-16T06:26:40Z")

</div>

> [@00BlackSS](#):
>
> motor jack off :doh:

[Next page](https://forums.speedlife.net/t/jw-ultra-bell-install-under-way-th-400/178862.md?page=2)